CNC LATHE

TACCHI HD/3 105H S CNC 840D

Condition: excellent (used), Tacchi HD/1450 – 725 x 4000mm CNC Lathe (2012) Bodpexc In Sjfx Ah Isld Serial Number: 7264 Year: 2012 Control: Fanuc OiTD CNC Condition: Used – good working order Technical Specifications: Centre height: 725mm Swing over bed: 1450mm Swing over cross slide: 1000mm Distance between centres: 4000mm Main drive motor: 60 kW Maximum weight between centres (unsupported): 15,000 kg Spindle speed range: 1.9 – 560 rpm Features & Equipment: 2 x 3-point steady rests Handwheel Swarf conveyor 4-position hydraulic toolpost 4-jaw chuck Fanuc OiTD CNC control

Condition: good (used), Vertical Turning Lathe SC33 CNC Manufacturer: TITAN (Romania) YOM: 1986 Complete revision of the machine in 2005 Main technical data: CNC Siemens 802D Faceplate diameter: 3000mm Max. turning diameter: 3300mm Max. working height: 3000mm Max. workpiece weight: 18000kg Table speed range: 1.02-92 RPM Working feed range: 0.05-5 mm/rev. Main motor power: 55 kW Overall dimensions: 5600 x 5300 x 5400 mm Bsdpjw Eplaefx Ah Iold Weight: 47350 kg The machine is under power.

Year of construction: 1981, condition: excellent (used), faceplate diam 1300mm max turning diam 1100mm range of turning diam 460-1250mm Blsdpfxok Dz N Is Ah Iod

Condition: good (used), Year of construction: 2003, functionality: fully functional, workpiece weight (max.): 12,000 kg, feed length Y-axis: 300 mm, feed length Z-axis: 1,080 mm, table diameter: 1,200 mm, feed rate X-axis: 3 m/min, feed rate Y-axis: 500 m/min, feed rate Z-axis: 3 m/min, input current: 195 A, workpiece diameter (max.): 1,600 mm, milling spindle length: 450 mm, table bore: 400 mm, spindle speed (min.): 250 rpm, overall weight: 51,000 kg, power: 115 kW (156.36 HP), Equipment: documentation/manual, Liebherr high-performance gear hobbing machine LC1502 in good condition Bljdpfx Ahewqm A To Ijd Controller Liebherr LH90 V4, Bosch Rexroth drives Extensive accessories such as BHG, cooling unit for lubrication and coolant, extractor, cutter arbors, various software packages/limit value extensions, and complete documentation. We can also assist with setup and commissioning up to production, depending on effort!

Year of construction: 1983, condition: good (used), Machine number: 316204/22 Type / Model: FSS 315/E Travel x-y-z: 850 - 280 - 355 mm table: 1.200 x 370 mm clamping surface: 1.060 x 260 mm Speed range: 28 to 1,400 rpm spindle mount: SK 50 quill stroke: 80 mm Feed rates x and y axis 16 to 800 mm/min feed z-axis: 5 to 250 mm/min Connection: 8 kW Bedpfx Ahjfli Afs Ijld Accessories/equipment: Swivel head; condition: good Weight: 4 t Dimensions: 2.000 x 2.000 x 2.400 mm

Condition: excellent (used), Year of construction: 2010, swing diameter 1600 mm faceplate diameter 1400 mm Control Siemens Sinumerik 840D SL turning height 1245 mm max. table load 9000 kg table drive 60 kW torque - table 13400 Nm Bljdpfxexylm To Ah Isd Table rpm 450 1/min speeds c-axis 0,004-5 1/min. feed range 18000 mm/min dimensions of the machine ca. 8,5 x 5,3 x 5,7 m weight of the machine ca. 47,4 t Crossbeam support: -Travel range X-axis: ± 950 mm Crossbeam stroke W-axis: 600 mm Ram : -Cross-section Ram: 250 x 250 mm -Plunging diameter: 340 mm -Travel Z-axis Ram: 1100 mm Drilling and milling device: - Distance between milling spindle and machine table 1245 mm - Tool holder SK 50 - Drive power 30 kW - Speed range 2000 rpm - Torque 1395 Nm Equipment/accessories: -16-40-fold pick-up magazine -Protective device -Various turning tool holders -Various SK50 tool holders and tools -Various clamping devices -Coolant device with filter -Chip conveyor -Documentation

Condition: excellent (used), Year of construction: 2018, travel distance X-axis: 1,300 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, table width: 670 mm, table length: 1,500 mm, DNM 6700 with fanuc control BT 40 shank with the below options : -12.000 rpm - TSC 70 bar - Data Server 1 GB - ACC II - Renishaw Touch Probe OMP 60 - Air blower -Automatic power off Blsdpfx Ahjw El U Re Isd

Condition: good (used), functionality: fully functional, Machine specifications: Blodpfx Ahex H Ifzo Iod Swing over bed: 1300 mm Maximum turning length: 4000 mm Description: The machine is in good technical condition; test run is possible by prior arrangement. Machine weight: 15,800 kg Machine dimensions (L x W x H): 7,425 x 3,475 x 2,535 mm Connected load: 82 kVA Center height over bed: 650 mm Maximum workpiece weight between centers: 10,000 kg Maximum swing / machinable diameter over cross slide: 940 mm Maximum swing / machinable diameter over bed: 1300 mm Maximum turning length / distance between centers: 4000 mm Spindle bore diameter: 104 mm Spindle diameter at front bearing: 180 mm Spindle speed range (rpm): 1st gear 0-100, 2nd gear 0-200, 3rd gear 0-400, 4th gear 0-800 Rapid traverse of longitudinal slide – max. working feed: 8 m/min Rapid traverse of cross slide – max. working feed: 6 m/min Tailstock quill diameter: 180 mm Quill stroke: 300 mm Accessories: SAUTER turret 0.5.480.532, Universal chuck 800 mm, Faceplate 1200 mm, Steady rest – small 300 mm, Steady rest – large 500 mm, Chip conveyor with container.

Condition: good (used), Year of construction: 1979, functionality: fully functional, machine/vehicle number: 332046, travel distance X-axis: 8,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 2,200 mm, spindle speed (max.): 850 rpm, spindle speed (min.): 6 rpm, feed rate X-axis: 8 m/min, feed rate Y-axis: 6 m/min, feed rate Z-axis: 1 m/min, total width: 10,000 mm, total length: 14,000 mm, total height: 4,500 mm, spindle diameter: 160 mm, table load: 40,000 kg, table length: 3,000 mm, table width: 3,000 mm, workpiece weight (max.): 40,000 kg, overall weight: 71,000 kg, drill spindle length: 1,200 mm, year of last overhaul: 2002, power: 60 kW (81.58 HP), The machine is dismantled on stock, it is fully functionable. Bsdpfxeuplptj Ah Isld

Condition: excellent (used), functionality: fully functional, I am selling this machine, connected and can be tested. Can send a video of the machine via whatsapp. Swing diameter over bed: 1250 mm Blsdpfx Asv Nw D Heh Ied Swing diameter over slide: 940 mm Center distance: 5000 mm Spindle bore: 102 mm