Table boring mill

TOS VARNSDORF WHN13-CNC

Condition: good (used), Year of construction: 2013, Ref. -No.: 10636 Manufacturer: TOS VARNSDORF Type: WHN 13 CNC Year of construction: 2013 Type of control: CNC-Steuerung Control: Heidenhain 530 Storage location: Halberstadt Country of origin: Czech Republic X-Travel: 3500 mm Y-Travel: 2000 mm Hsdozc D E Iepfx Algsu Z-Travel: 1250 mm W-Axis: 800 mm B-Axis: 360 ° Table Load: 15.000 kg Tool Taper: SK 50 Turning Speeds: 1400 RPM Spindle Speed: 2000 RPM Table size: 1800 x 2200 mm Further information: - The control system was converted to a HEIDENHAIN 530i in 2013. - All drives were upgraded to digital. Thrust bearing replacement on the tower also renewed in 2013. - Accessories: - 3D probe - Heidenhain, large spindle support - 1x Heidenhain axis module (completely overhauled), - 1 new axis module is installed in the machine. - Newly packaged spare parts, covers from the machine. - All bearings have been replaced on the machine in recent years. - Tools and milling cutter heads are available. The machine is first-hand. The machine is still powered up and in production. The machine can be viewed by appointment.

Condition: used, spindle diameter 160 mm x-travel 4000 mm y-travel 2200 mm z-travel 1500 mm 270 mm spindle turning speed range 20-2000 U/min Control Heidenhain type TNC530i table surface area 3000x1600 mm table load 40 t spindle taper ISO 50 spindle motor 50 kW T-slot - width 28 mm number of T-slots 9 Maschine wurde überholt machine is retofit The tech. Data are manufacturer or operator information and therefore non- Hsdsyq Swbspfx Algju binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), Year of construction: 1992, TOS Varnsdorf Hsdpfx Aez D Sptelgju WHN 13 Year of manufacture: 1992 Travel ranges: 2000 x 1850 x 800 Table load: approx. 18 tons Heidenhain 310 TNC 37 kW spindle: diameter 130 / SK 50 / S800

Condition: ready for operation (used), functionality: fully functional, TOS Varnsdorf Hjdpfx Alez Dxq Dsgju WHN 13 Year of manufacture: 1979 Travel ranges: 3000 x 2000 x 800 mm Table load capacity: approx. 18 tons Table size: 1800 x 1800 mm Heidenhain 310 TNC control 37 kW Spindle: Diameter 130 / SK 50 / S800

Condition: refurbished (used), Year of construction: 2007, VIDEOS AVAILABLE ON REQUEST UNION CBFK 130/2 CNC Table Type Horizontal Boring & Milling Machine Manufacturer: UNION Gera (VEB Werkzeugmaschinenfabrik UNION Gera) Model: CBFK 130/2 Control: Heidenhain CNC Machine type: CNC Table Type Horizontal Boring & Milling Machine Travels X-axis: 3,000 mm Y-axis: 1,600 mm Z-axis: 1,275 mm W-axis (spindle quill): 400 mm B-axis (rotary table): 360° Table Table size: 1,600 × 2,000 mm Maximum workpiece weight: 7,000 kg Main Drive Main spindle motor: 32.4 kW Electrical Data Connected load: 80 kW Supply voltage: 380 V Frequency: 50 Hz Control voltage: 220/24 V Auxiliary voltage: 220/15 V Rated machine current: 150 A Recommended fuse: 200 A Operating temperature: 15–35 °C Machine Weight Approximate machine weight: 28.3 tonnes Hjdpfx Aozqbg Dslgeu Year Originally manufactured: (not shown on plate) General overhaul: 2007 Machine Identification Model: CBFK 130/2 Serial number: 12266 Operating Hours (Heidenhain) Control ON: 112,694 h Machine ON: 100,869 h Program running time: 22,209 h Spindle running time: 18,280 h

Condition: good (used), Year of construction: 2003, feed length X-axis: 3,500 mm, feed length Y-axis: 2,500 mm, feed length Z-axis: 1,250 mm, total length: 7,200 mm, total height: 5,300 mm, table width: 1,800 mm, total width: 6,800 mm, table length: 2,200 mm, workpiece weight (max.): 12,000 kg, Table type boring mill TOS VARNSDORF - WHN13CNC MACH-ID 9629 Make: TOS VARNSDORF Type: WHN13CNC Control: HeidenHain TNC430 Year: 2003 1e owner machine ca 16.000 Spil hours Chip conveyor Under power  X - Travel: 3500mm Y - Travel: 2500mm Z - Travel: 1250mm W - Travel: 800mm Table Length: 2200mm Table Width: 1800mm Table load: 12000 Speeds / ranges: 2800Rpm Power: 37kW Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Feed rate W-Axis: 10000mm/min. Number of controlled axis:5 Length: 7200mm Width: 6800mm Hedoy T E Itspfx Algou Height: 5300mm Weight: 36850kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 800 mm, table load: 12,000 kg, total height: 3,900 mm, total length: 7,200 mm, total width: 5,200 mm, table length: 1,800 mm, table width: 1,600 mm, feed rate X-axis: 8,000 m/min, feed rate Y-axis: 8,000 m/min, feed rate Z-axis: 8,000 m/min, rotational speed (max.): 2,000 rpm, Table type boring mill TOS VARNSDORF - WHN 13 CNC MACH-ID 9612 Make: TOS VARNSDORF Type: WHN 13 CNC Control: Heidenhain TNC415 X - Travel: 3500mm Y - Travel: 2000mm Z - Travel: 800mm W - Travel: 1000mm Table Length: 1800mm Table Width: 1600mm Table load: 12 Speeds / ranges:2000Rpm Hedey H Dahspfx Algeu Power: 37kW Spindle Taper: ISO50ISO/Bt/Mk Feed rate X-Axis:8000mm/min. Feed rate Y-Axis:8000mm/min. Feed rate Z-Axis:8000mm/min. Feed rate W-Axis:8000mm/min. Length: 7200mm Width: 5200mm Height: 3900mm Weight: 34500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Controller: Heidenhain TNC 355 X-axis (table longitudinal) mm: 2.780 Y-axis (headstock vertical) mm: 2.425 Z-axis (column) mm: 2.310 B-axis (rotary table): degrees 360° Tool holder / taper: SK 50 (ISO 50) Hedpfxozxwyis Algou • Heidenhain TNC 355 CNC control • 360° NC rotary table (B axis) • Approx. 40 SK 50 tool holders included, partly fitted with tools • Siemens SIMODRIVE drive package

Condition: ready for operation (used), travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,250 mm, table load: 12,000 kg, spindle diameter: 130 mm, spindle speed (min.): 10 rpm, spindle speed (max.): 2,500 rpm, table length: 2,200 mm, table width: 1,800 mm, feed length X-axis: 3,500 mm, feed length Z-axis: 1,250 mm, Spindle diameter: 130 mm X-axis travel: 3,500 mm Y-axis travel: 2,500 mm Z-axis travel: 1,250 mm B-axis (table): 360º W-axis travel (quill): 800 mm Hsdey Hgvrjpfx Algsu Table size: 2,200 x 1,800 mm Max. table load: 12,000 kg CNC: Heidenhain 424 M Spindle speed (2 ranges): 10 - 2,500 rpm Coolant tank: Yes Tool holder: BT 50 Weight: 42,000 kg Dimensions: 6,460 x 6,960 x 4,400

Condition: used, spindle diameter 130 mm x-travel 6000 mm y-travel 1750 mm z-travel 600 mm w-axis 800 mm spindle taper SK 50 control Siemens 8M type 8M mm table surface area 1500x1300 mm Table load . kg turning speeds . U/min spindle motor . kW feed . m/min total power requirement . kW weight of the machine ca. 75 t dimensions of the machine ca. . m Tool magazine: 60 tools The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Hodpfx Aloyq Swnjgsu About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team