Bench drill

TOS VARNSDORF WHQ 13.8 CNC

Condition: used, Year of construction: 2009, spindle diameter 125 mm x-travel 1.500 mm y-travel 1.250 mm z-travel 1.000 mm table surface area 1.000 x 1.250 mm w-travel 550 mm workpiece weight 6.000 kg quill stroke 550 mm tool taper ISO 50 number of spindle speeds 5-3.700 U/min. max. torque 2012 Nm feed speeds 1-6000 (x-Achse) mm/min feed speeds 1-6000 (y-Achse) mm/min feed speeds 1-6000 (z-Achse) mm/min rapid traverse x/y/z 15/ 15/ 15 m/min dimensions of the machine ca. 7,51 x 5,07 x 3,33 m 63 kVA Equipment/ Accessories: Duedswdta Eepfx Abfsu - CNC control Siemens 840 D - 60 ATC - Coolant system with high-pressure pump 30 l/min.- 20 bar - documentation

Condition: good (used), Year of construction: 2003, feed length X-axis: 3,500 mm, feed length Y-axis: 2,500 mm, feed length Z-axis: 1,250 mm, total length: 7,200 mm, total height: 5,300 mm, table width: 1,800 mm, total width: 6,800 mm, table length: 2,200 mm, workpiece weight (max.): 12,000 kg, Table type boring mill TOS VARNSDORF - WHN13CNC MACH-ID 9629 Make: TOS VARNSDORF Type: WHN13CNC Control: HeidenHain TNC430 Dedpoy T E Itjfx Abfeuu Year: 2003 1e owner machine ca 16.000 Spil hours Chip conveyor Under power  X - Travel: 3500mm Y - Travel: 2500mm Z - Travel: 1250mm W - Travel: 800mm Table Length: 2200mm Table Width: 1800mm Table load: 12000 Speeds / ranges: 2800Rpm Power: 37kW Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Feed rate W-Axis: 10000mm/min. Number of controlled axis:5 Length: 7200mm Width: 6800mm Height: 5300mm Weight: 36850kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: reconditioned (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 20 rpm, table width: 1,000 mm, table length: 4,200 mm, RepairFIT by Dornhöfer The difference. Includes installation & commissioning! Djdpfx Aoy T Elljbfeuu KEY TECHNICAL DATA Year of machine construction: 2007 Capacities / Travel: Longitudinal (X): mm 4,000 Transverse (Y): mm 1,200 Vertical (Z): mm 1,500 Table size: Length: mm 4,200 Width: mm 1,000 Width of T-slots: H9 Reference slot: H7 Paint finish: RAL 5010 and RAL 9002 Tool interface: ISO 50, DIN 69871 AD Drawbar: DIN 69872 Form A Main drive: Drive power: kW 30 Spindle speed range: Spindle speed: min-1 20-3,000 Feeds: X, Y and Z axes mm/min 2 – 12,000 Max. rapid traverse speed: X, Y and Z axes mm/min 15,000 Weight: kg approx. 22,000 HEIDENHAIN iTNC 530 Automatic MTE milling head, diagonal Coolant system RepairFIT is our proven offering for a profitable entry into our product lines. The machines available in this line are sourced by us after a strict selection process and undergo a thorough inspection (deep-dive check). After intensive cleaning, the identified obvious defects and errors were professionally repaired by our expert service team.

Condition: good (used), Year of construction: 1998, Ref. -No.: 10583 Manufacturer: MTE Type: BF 4200 Year of construction: 1998 Type of control: CNC Control: Heidenhain TNC 426 Storage location: Halberstadt Country of origin: Germany X-Travel: 4000 mm Y-Travel: 1200 mm Z-Travel: 1500 mm Turning Speeds: 2.500 RPM Rapid Traverse X/Y/Z: 400 m / min Table surface area (LxW): 4200 x 1000 mm Tool changer: 40 Table load max.: 13.000 kg Tool Taper: SK 50 Weight: 20 t Number Of T-Slots: 7 Pcs Dsdpfxsy Ed Ipo Abfeuu Width of the T-slots: 22 mm Distance between the grooves: 140 mm Further information: - Heidenhain HR410 handwheel - 3D scanner, infrared - The ball screw on axes Z and Y runs clamped and supported on combined radial/axial roller bearings and radial ball bearings with 250 N/sqm stiffness. The machine can be viewed while powered up.

Condition: used, Year of construction: 1998, travel distance X-axis: 8,300 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,000 mm, table load: 30,000 kg, spindle diameter: 220 mm, BRAND: COLGAR MODEL: FRAL 70 C16 CATEGORY: CNC BORING MACHINE YEAR: 1998 Duodpfox E U R Iox Abfou CNC CONTROL: ECS CNC2600 MACHINE DIMENSIONS Length: 14,000 mm Width: 9,000 mm Height: 6,500 mm SPINDLE HEAD Quill diameter for boring: 160 mm Spindle nose type: ISO-50 Milling spindle diameter: 220 mm Spindle speed range: 2 – 1,665 rpm Spindle motor power: 55 kW Overhauled bi-rotary automatic head A axis minimum angle: 2.5° C axis minimum angle: 1° Automatic head changer system High-pressure coolant through spindle line with pump WORKING CAPACITY X axis: 8,300 mm Y axis: 3,000 mm Z axis: 1,000 mm V axis: 2,000 mm W axis: 800 mm B axis rotation: 360° A axis bi-rotary head: 360° (minimum angle 2.5°) C axis bi-rotary head: 360° (minimum angle 1°) RAM dimensions: 645 x 500 mm ROTARY TABLE Table dimensions: 2,500 x 2,500 mm Maximum load: 30,000 kg Number of Stolle plates: 2 (each 4,000 x 2,000 mm) FEED RATES Rapid feed (axes X, Y, Z, V, W): 8,000 mm/min Working feed (axes X, Y, Z, V, W): 6,000 mm/min TOOL MAGAZINE Capacity: 60 tools Tool holder: DIN 69871-B50 ACCESSORIES Machine complete with accessories, Stolle plates, and rotary table

Condition: used, Year of construction: 2013, operating hours: 18,995 h, functionality: fully functional, machine/vehicle number: VH-20053, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 5 m/min, position of the milling head: mittig, spindle speed (max.): 3,500 rpm, spindle speed (min.): 50 rpm, table width: 1,050 mm, table load: 5,000 kg, table length: 2,100 mm, table height: 860 mm, total height: 3,500 mm, total width: 4,485 mm, total length: 5,550 mm, type of input current: AC, workpiece weight (max.): 5,000 kg, overall weight: 11,000 kg, control cabinet width: 600 mm, power: 25 kW (33.99 HP), control cabinet length: 1,275 mm, control cabinet height: 2,370 mm, Equipment: rotational speed infinitely variable, For sale is an MTE BF-2000 CNC bed-type milling machine, year of manufacture 2013, in very good condition with comparatively low hours of use. The machine is ideal for precise and heavy machining operations in mechanical and tool engineering. Thanks to its rigid bed construction and powerful spindle, large and heavy workpieces can also be machined reliably. The machine is well maintained, fully functional, and can be inspected by appointment. Further technical data and accessories are available on request. Dujdpfx Ajytqdrjbfju Control: Siemens 840D SL Spindle taper: SK50 (DIN69871) The quoted price is exclusive of dismantling, packaging, and shipping. Sale ex works; subject to prior sale. Machines are sold in used condition; any guarantee and warranty are excluded.