Forklift

Toyota 8 FBE 20 T

Condition: used, machine/vehicle number: 8FBE20T-13521, Year of construction: 2018, operating hours: 1,422 h, lifting height: 4,700 mm, fuel type: electric, battery capacity: 690 Ah, battery voltage: 48 V, Empty weight: 4.566 kg Lifting capacity: 2.000 kg Maximum passing height: 212 cm Supply voltage: 48 V Remanufactured: Yes Front tyre size: SE Marangoni Rear tyre size: SE Marangoni Transport dimensions (LxWxH): 2,988x1,152x2,12 Bjdpfeq Rtl Asx Afpelf Please contact Karl Leitner for more information = Additional options and accessories = - 4th valve

Condition: new, Year of construction: 2025, Roll forming metal siding “double façade panel” machine SPM-2 Roll forming metal siding “double façade panel” machine SPM-2 is new design product of our company for façade and wall metal panels forming with the necessary configuration. These double façade panels are very popular in construction business of cladding residential buildings and industrial structures, for the construction of fences of various configurations, gazebos, roofing elements, etc. The SPM-2 metal siding production line is fully automatic and consists of a rolling part of the machine, an automation system and guillotine cutting shears at the machine exit. The line can have as additional parts a manual or automatic uncoiler for metal rolls, depending on the customer's needs. As standard version, this metal siding double façade panels roll forming machine SPM-2 makes a flat panel profile, but with the additional equipment, it is possible to roll panels with a microwave or rib shape profile. To start rolling, it is necessary to install a roll of metal to the decoiler and to put the end of the strip to the first rolling rollers of the equipment and feed it into them. After step by step, to put the metal to the next rollers, adjusting it if necessary. When metal comes to the cutting device of machine you need to feed metal into cutting knives and to make “zero” cut. After such step, equipment can move to automatic operation mode. The control panel of machine has the ability to set the number of tasks and the length of products, single tasks or to work in multitasking mode. After setting up necessary parameters the machine will automatically roll the metal cladding wall panels and cut them into necessary sizes. Thus, the customer will receive final product as quickly as possible and with the highest possible result. The roll forming speed is adjustable and can be up to 10-15 meters per minute. The SPM-2 metal wall cladding panels production line has special tools for punching out fastening holes on the side of the panel. It makes possible for the customer to get more interesting solution options and to offer a wider range of products to the end user. Bljdpfx Afjxghngspsf The rolling part of the machine has 18 pairs of forming steps, ensuring high quality of final product. You can get machine with protective cover or without it as per your request preferences. Specifications Material width (mm) 416 The material thickness (mm) 0,4-0,5 Engine power (kW) 3 + 1,1 Rolling speed (m/min) 10-15

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, operating hours: 3,764 h, load capacity: 2,000 kg, lifting height: 4,300 mm, fuel type: electric, mast type: triplex, construction height: 4,300 mm, battery capacity: 630 Ah, battery voltage: 48 V, overall weight: 3,515 kg, total height: 2,030 mm, total length: 1,980 mm, total width: 1,150 mm, Equipment: sideshift, Specification: Forklift type: Electric forklift Item code: 11128 Manufacturer: TOYOTA Model: 8FBE20T. Year: 2016 Lifting capacity, kg: 2000 Mast type: Triplex Lifting height, mm: 4300 Operating hours: 3764 Country: Sweden Weight (kg): 3515 Dimensions (L x W x H, mm): 1980 x 1150 x 2030 Overall height, mm: 2030 Forklift attachments: Side shift, Battery charger Battery: 48 V / 630 Ah Bsdpfxoyrpt Ae Afpolf

Condition: used, functionality: fully functional, machine/vehicle number: 2689, Year of construction: 2016, operating hours: 1,800 h, load capacity: 2,000 kg, lifting height: 4,700 mm, free lift: 1,500 mm, fuel type: electric, mast type: triplex, construction height: 2,200 mm, fork length: 1,200 mm, drive type: Elektro, Electric 3-wheel forklift Chassis number: 2689 Load centre: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Ready for use and fully functional Bsdpfx Afoym Hl Sepolf Technical condition: normal Front tyres type: Superelastic Front tyres condition: 60 - 80% Rear tyres type: Superelastic Rear tyres condition: 60 - 80% Battery type: PzS Side shift, 3rd valve, 4th valve, rear work light, front work light,

Condition: good (used), Year of construction: 2017, fuel type: electric, Vehicle description 2 pieces electric forklift LINDE E16C-02 EVO Bljdpsipqz Eofx Afpjf YEAR 2017 Stacker 1 with 6.363 hours Stacker 2 with 6.142 hours both compl. identical in construction !!! 1,6 tons lifting capacity 2,1 meter headroom 4,62 meters lifting height - Triplex free lift mast - sideshift - loader - Working headlight - original paint - ready for immediate use Selling price: 18.500,-- net per forklift !!! Also favorable delivery possible !!!

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, operating hours: 8,135 h, load capacity: 2,000 kg, lifting height: 3,300 mm, fuel type: electric, mast type: duplex, construction height: 2,120 mm, battery capacity: 690 Ah, battery voltage: 48 V, empty load weight: 3,425 kg, total height: 2,120 mm, total length: 2,030 mm, total width: 1,150 mm, Equipment: sideshift, Specification: Truck type: Electric forklift Product code: 11129 Manufacturer: TOYOTA Model: 8FBE20T Year: 2016 Lifting capacity, kg: 2000 Mast type: Duplex Lifting height, mm: 3300 Operating hours: 8135 Country: Italy Bodeylmihopfx Afpelf Weight (kg): 3425 Dimensions L x W x H, mm: 2030 x 1150 x 2120 Overall height, mm: 2120 Attachments: Side shift, front and rear windscreen, battery charger Battery: 48 V / 690 Ah Note: The forklift has been inspected – technically sound. Full technical service will be performed before delivery.

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 5,857 h, load capacity: 2,000 kg, lifting height: 3,000 mm, free lift: 1,425 mm, fuel type: electric, mast type: duplex, construction height: 2,055 mm, drive type: Elektro, Electric 3-wheel forklift Load center: 500 Mast type: Duplex Condition: Ready for use and fully functional Technical condition: good Front tires type: Superelastic Rear tires type: Superelastic Battery voltage: 48V Battery Ah: 625Ah Battery year of manufacture: 2019 Blodpfx Ajv A A E Aofpof Description: Side shift, fork positioner, 3rd valve, 4th valve, rear work light, front work light, roof cover, windscreen, full free lift, safety light, LED,

Condition: used, Year of construction: 2018, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 8945646465, total width: 2,000 mm, total length: 12,000 mm, total height: 1,800 mm, overall weight: 3,500 kg, air demand: 1 m³/h, Digital textile printing machine, pigments inks, GOTS and Oekotex 100, class baby articles, printing width 1.80m Technical specifications - Ink type: Kornit NeoPigment™ Intenso, water-based - Color channels: 7 (CMYK + Red, Green, Grey) Bledpfsw Tynmox Afpjf - Pre-treatment: integrated 8th channel - Print heads: 64x Spectra Polaris (recirculating) - Print width: up to 180 cm - Print speed: up to 200 m²/h - Print resolution: 400–1200 dpi (recommended 600 x 600 dpi, 6-pass, interlaced) - Ink capacity: 4 liters per color - Weight: approx. 3,500 kg - Power supply: 3-phase, 25 kW, 110/220 V, 50/60 Hz

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, load capacity: 2,000 kg, lifting height: 5,000 mm, free lift: 1,670 mm, mast type: triplex, fork length: 1,200 mm, Submission of a bid obligates timely collection by 27/02/2026! TECHNICAL DETAILS Load capacity: 2,000 kg Mast type: Triplex Overall height: 2,240 mm Lift height: 5,000 mm Free lift: 1,670 mm Fork length: 1,200 mm MACHINE DETAILS Total weight: 3,630 kg Battery: 48 V 6 EPzS 690 Ah Charger: Hawker digital D: 48/80 EQUIPMENT Double auxiliary hydraulics Integrated sideshift Blodpfxsyfpa Ao Afpef Load backrest Front windscreen 2x front working lights Fork extension 1,800 x 120 x 40 mm

Condition: used, Year of construction: 2018, operating hours: 5,889 h, load capacity: 2,000 kg, lifting height: 6,000 mm, free lift: 1,500 mm, mast type: triplex, construction height: 2,600 mm, drive type: Elektro, Electric 3-wheel forklift Load center: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Technical condition: good Front tires Type: Superelastic Front tires Condition: 60 - 80% Bodpfx Afeun Dfqepolf Rear tires Type: Superelastic Rear tires Condition: 40 - 60% Battery Volt: 48V Battery year of construction: 2018 Battery condition: 60 - 80% Description: The vehicle is UVV - checked. Before delivery, the machine is serviced and cleaned. The machine can be repainted on request. Sideshift, 3rd valve, rear working lights, front working lights,

Condition: reconditioned (used), Year of construction: 1996, functionality: fully functional, input voltage: 400 V, Thieme 520 semi-automatic angular-opening machine Year of manufacture: 1996 Print format: 750 x 1050 mm Condition: Final stage of restoration Bodpfx Aoxk T D Uefpjlf Sartech is a company specializing in screen printing, automation, and robotics solutions, as well as the manufacture of UV (electronic) or hot air curing tunnels.

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 6,709 h, load capacity: 2,000 kg, lifting height: 6,500 mm, free lift: 2,250 mm, fuel type: electric, mast type: triplex, construction height: 2,800 mm, drive type: Elektro, Electric 3-wheel forklift ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: Good Battery voltage: 48V Sideshift, Third valve, Bodpfx Afexrh Iqjpelf

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 5,902 h, load capacity: 2,000 kg, lifting height: 3,700 mm, free lift: 1,840 mm, fuel type: electric, mast type: duplex, construction height: 2,380 mm, drive type: Elektro, Electric 3-wheel forklift ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Duplex Condition: Ready for operation and fully functional Technical condition: good Battery voltage: 48V Bodpoxrh Ikjfx Afpslf Sideshift, 3rd valve,

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Tunkers Vorwärts S1100 fully automatic sheet to sheet laminating machine. Sheet to sheet laminating machine which is in good condition and was used a few times for specific jobs. Bsdpfxsv Rpknj Afpelf Dismantled and packed, ready for shipment.

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 7,796 h, load capacity: 2,000 kg, lifting height: 3,700 mm, free lift: 1,840 mm, fuel type: electric, mast type: duplex, construction height: 2,380 mm, drive type: Elektro, Electric 3-wheel forklift ISO class: ISO Class 2 = 1,000 - 2,500 kg Bodsxrh Idspfx Afpolf Mast type: Duplex Condition: Ready for operation and fully functional Technical condition: good Battery voltage: 48V Sideshift, 3rd valve,