Punching & Nibbling Machines

TRUMPF CS20a

Condition: ready for operation (used), Punching force: max. 20 to stroke length: 16 mm strokes: 200, 300, 400, 600 1/min motor power: 4kW working ranges: transverse (x-direction) 1.000mm longitudinal (y-direction) 500mm working area max. 500 x 1.000mm Fsxedxfmg table area: 875 x 1.600mm (without outrigger) weight: approx. 4.500kg Power: see photo data sheet Big number of stamping units as accesoirs with the machine Machine can still be seen under power at the last working company

Condition: ready for operation (used), Year of construction: 2007, Operating hours: 26,073 h, Functionality: fully functional, Laser power: 4,000 W, Sheet thickness aluminum (max.): 10 mm, Sheet thickness steel (max.): 20 mm, Travel distance X-axis: 3,000 mm, Travel distance Y-axis: 1,500 mm, Travel distance Z-axis: 115 mm, TECHNICAL DETAILS Dpojgp Travel X / Y / Z: 3000 / 1500 / 115 mm Workpiece weight: max. 900 kg Control: Sinumerik 840 D SL Laser source: TruFlow 4000 Power range: max. 4,000 W Wavelength: 10.6 µm Sheet thickness Al / stainless steel / mild steel: 10 / 15 / 20 mm Simultaneous speeds: 140 m/min Position deviation Pa: ±0.05 mm Position spread Ps: ±0.03 mm MACHINE DETAILS Dimensions: 9.3 x 4.6 x 2.2 m Weight: 12.0 t Connected load: 88 kVA Switch-on time: 47,377 h Cutting time: 26,073 h

Condition: ready for operation (used), Year of construction: 1998, Functionality: fully functional, Laser power: 2,400 W, Sheet thickness aluminum (max.): 8 mm, Sheet thickness steel (max.): 15 mm, Travel distance X-axis: 3,000 mm, Travel distance Y-axis: 1,500 mm, Travel distance Z-axis: 115 mm, Reason for disposal: Stock clearance - collection must take place by 30.09.2024 Machine is sold with an additional laser cutting unit! TECHNICAL DETAILS X-travel: 3,000 mm Y-travel: 1,500 mm Z-travel: 115 mm Workpiece weight: max. 710 kg Control: based on Sinumerik 840D Axis parallel/simultaneous speeds: 60 / 85 m/min Cutting speed: 3 m/min Path dimension: 0.01 mm Position deviation: ± 0.10 mm Position spread: ± 0.03 mm Laser: TLF 2400 turbo Laser power: 120 - 2400 W Wavelength: 10.6 µm Laser mode: TEM00 Frequency: 0.1 - 10 kHz Cutting gas: Oxygen O2 Sheet thickness aluminum: 1 - 8 mm Sheet thickness stainless steel: 1 - 2.5 mm Sheet thickness steel: 1 - 15 mm MACHINE DETAILS Space requirement: 9.3 x 4.6 x 2.0 m Weight: 11.5 t Compressed air connection: 6 bar Rated voltage: 400V / 3~ / 50 HZ Control voltage: 24 V Connected load: 71 kVA Total power requirement: 28 kVA No2B8Sss EQUIPMENT - Insert for medium formats 1500 x 1500 mm - Riedel L15/21 TR2 15.00 air conditioning unit; refrigerant R22 - VARIO T 1.5 panel filter - Machine is sold with an additional laser cutting unit

Condition: excellent (used), Year of construction: 2015, Functionality: fully functional, 6kW laser with automation The machine is partially overhauled Manufacturer: TRUMPF Model: TruLaser 5040 (L53) Year of manufacture: 2015 Serial number: A1250E0017 Control system: Siemens Sinumerik 840 D SL Maxi format TECHNICAL DATA: Covhtbs0Uu Laser power: 6,000 watts Laser source: TruFlow 6000 Working area: 4,000 x 2,000 mm Max. Workpiece weight: 3,200 kg Max. Simultaneous speed: 300 m/min Max. Sheet thickness: - Mild steel: 25 mm - Stainless steel: 25 mm (30 mm) - Aluminum: 15 mm (20 mm) EQUIPMENT: Special equipment: - Smart Nozzle Automation (compatible with standard/ColLine/BrightLine/mirror cutting head nozzles) (nozzle changer incl. nozzle alignment, nozzle inspection and LensLine with automatic status check) - BrightLine with TruFlow 6000 - DetectLine: Precise sheet position detection (incl. automatic focus measurement) - CoolLine - Wide cross conveyor belt with tilting container to the right of the machine - Cleaning brush - Machine roof (modified front door, already included in the mirror cutting head technology package) - Integrated camera (Full HD) for process monitoring and single image transmission to the network (view of the first 2.5 m) - Drop&Cut - Smart Collision Prevention (requires plug-in with TruTops) - More powerful compact dust extractor (2,500 m³/h extraction capacity) - Wireless Operation Point (as the basis for MobilControl app and Visual Online Support) Standard equipment: Machine: - Closed machine frame with integrated laser unit - Motion unit for high-precision processing - Gantry drive in

Year of construction: 2015, Condition: ready for operation (used), General Data Measurements width 4800 mm Measurements depth 8800 mm Measurements height 2400 mm Machine weight 12000 kg Control Unit Brand Siemens Model Sinumerik 840 D Main Drive Laser power 5000 Watt Laser type TruDisk 5000 fiber Number of axis 3 Movement Dptbxn X-Axis Movement 3000 mm Y-Axis Movement 1500 mm Z-Axis Movement 115 mm The TRUMPF TruLaser 5030 (L56) fiber 5kW, manufactured in 2015, is a precise and efficient laser cutter. Its 3-axis system handles work dimensions of 3000 x 1500 x 115 mm. Powered by a 5000 Watt TruDisk 5000 fiber laser, it achieves high-speed cuts up to 265 m/min. The machine, measures 8800 x 4800 x 2400 mm. It is controlled by a Siemens Sinumerik 840 D for accuracy and ease of use. Contact us for more information about this machine. Application Types Cutting

Condition: good (used), Year of construction: 2014, Laser power: 5,000 W, Total length: 11,800 mm, Total height: 2,300 mm, Total width: 1,500 mm, Workpiece weight (max.): 900 kg, Travel distance X-axis: 3,000 mm, Travel distance Y-axis: 1,500 mm, Travel distance Z-axis: 115 mm, Worktable length: 3,000 mm, Worktable width: 1,500 mm, Catalog No. : 7774 Type: TruLaser 5030 Producer: TRUMPF Made in: 2014 Characteristic: Control system: Siemens Sinumerik Total hours: 45964 h Hours on: 27586 h Laser power: 5 kW Length of the working table: 3000 mm Width of the working table: 1500 mm Maximum table load (evenly distributed): 900 kg Travel length X-axis: 3000 mm Travel length Y-axis: 1500 mm Travel length Z-axis: 115 mm Machine height: 2300 mm Machine length: 11800 mm Machine width: 6300 mm Machine weight: 13500 kg Cfgr03Tfcu

Condition: good (used), Year of construction: 2007, Functionality: fully functional, Laser power: 4,000 W, Beam On 26073 h operating hours Bnladmthtq8 Laser On 47377 h Operating hours Two cutting heads 5 and 7.5 Nozzles and lenses

Condition: excellent (used), Year of construction: 2006, Operating hours: 88,979 h, Functionality: fully functional, Punching force: 22 t, Laser power: 3,200 W, Travel distance X-axis: 2,585 mm, Travel distance Y-axis: 1,280 mm, Scope of delivery: - Gripmaster Coibwtdzxc - Toolmaster - Sheetmaster - No cassettes TECHNICAL DETAILS Punching work area: 3,085 x 1,370 mm Laser working area: 3,085 x 1,280 mm Combined working area: 2,585 x 1,280 mm Control system: Siemens Sinumerik 840 D Laser power: 3,200 watts Wavelength: 10.6 µm Sheet thickness: max. 8 mm Workpiece weight: max. 200 kg Hold-down device: 4.5 - 20 kN Punching force: 220 kN Linear magazine: 19 tools with 2 clamps Tool change time: 1.5 - 5 s Programmable chute: 500 x 500 mm Positioning speed X / Y / simultaneous: 90 / 60 / 108 m/min C-axis punching: 60 rpm C-axis thread forming: 180 rpm Punching stroke sequence: 900 1/min Stroke sequence marking: 2800 1/min Position deviation: ± 0.10 mm Position spread: ± 0.03 mm MACHINE DETAILS (basic machine) Length: 7,500 mm Width: 8,100 mm Height: 2,400 mm Weight: 16,000 kg Operating voltage: 400 V / 50 Hz Connected load: 76 kVA Compressed air connection: 7 ± 1 bar Laser gas consumption CO2 / N2 / He: 1 / 6 / 13 l/h

Condition: used, Year of construction: 1998, x-travel: 1500 mm x-travel: mm y-travel: 1500 mm distance between columns: mm Beam Hour: h laser capacity: 2400 W control: weight of the machine ca.: t air-pressure connection: 6 bar Voltage: 400V / 3~ / 50 HZ V control voltage: 24 V connected load: 71 kVA total power requirement: 28 kVA dimension coolant device LxWxH: m space requirements of the machine approx.: m Insert for medium formats 1500 x 1500mm Air conditioner Riedel L15/21 TR2 15.00; refrigerant R22 Panel filter VARIO T 1.5 Materials that can be processed: Mild steel (1 - 20 mm material thickness), stainless steel (1-12 mm material thickness), aluminum alloys (1-8 mm material thickness) Cutting speed generally 3 m/min. Dpssfj Cutting gas: generally oxygen O2 Zubehör: 1 Laserkopf Purchase condition: The laser must be loaded and collected by 30.09.2024.

Condition: excellent (used), Year of construction: 2014, Manufacturer: TRUMPF Model: TruLaser 5030 Fiber (L56) R90Bdcueub Year of manufacture: 11/2012, overhauled by TRUMPF and purchased in 03/2014 with only approx. 650 laser beam on hours Working area: 3,000 x 1,500 mm Laser power: 5,000 watts Working hours: only approx. 29.800 h (Laser on) EXTENDED EQUIPMENT: - TruDisk 5001 solid-state-laser with 1-LLK guidance - Nozzle Changer - Compressed Air Cutting - Copper Cutting Package - Brass Cutting Package - Bright Line Fiber - CO² extinguishing system for compact deduster - Pedestal Design incl. 10 m of additional LLK cable - Storage interface Standard machine equipment: - Closed machine frame - Integrated cabinet - Automatic pallet changer in longitudinal direction - Torque drive in combination with linear direct drives - Closed beam guidance via light cable (LLK) - Machine cooling unit (water-air) - Integrated control cabinets with interior lighting TruDisk power supply via the machine - Longitudinal conveyor belt - Work area lighting - Position laser diode - Spraying device - PierceLine - FocusLine - NitroLine - PlasmaLine - Automatic nozzle cleaning Cutting unit: - Advanced workshop programming - Simple workshop programming - Fast post-production - Sinumerik 840 D SL control system - 17” touch color screen - Integrated technology data - Automatic switch-off - Programmable cutting gas/pressure selection - FastLine - FlyLine - AdjustLine - Teleservice via Internet - Integrated e-Shop Data transmission: - USB interface - RJ-45 network connection Safety: - CE marking - Light barriers - Multi-chamber extraction system - Compact dust extractor - Machine cladding with certified viewing window Door, right This used machine can be inspected under production conditions. All information without guarantee - sold under exclusion of any guarantees and warranties. Subject to prior sale.

Condition: ready for operation (used), Year of construction: 2015, Control Unit Brand TRUMPF Main Drive Punching force 180 kN Maximum sheet thickness 6.4 mm Number of axis 2 Dptbv2 Movement X-Axis Movement 2500 mm X-Axis Working Feed 90 m/min Y-Axis Movement 1250 mm Y-Axis Working Feed 60 m/min Workpiece Workpiece weight 150 kg Additional Equipment safety light bars (X x Y): 6550 x 5000 mm (32.75 m²) Stopa SheetMaster Color monitor, TFT: 17" Touchscreen USB interface This punching machine was manufactured in 2015 by TRUMPF and is a model Trupunch 3000. It features a maximum sheet format of 2500 x 1250 mm and can handle sheet thicknesses up to 6.4 mm. The machine boasts a high punching force of 180 kN and a rapid stroke rate of 1000 strokes/min for punching. It includes advanced features like a Bosch Rexroth MTX CMP70 CNC control, a 17" TFT touchscreen, and USB interface. For more information about this punching machine, please reach out to us. Application Types Punching

Condition: good (used), Year of construction: 2003, Catalog No. : 7861 Type: Trumabend V85S Producer: Trumpf Made in: 2003 Saehe0Dk Characteristic: Pressing force: 85 t Stroke: 215 mm Machine weight: 8750 kg

Condition: excellent (used), Year of construction: 2012, Guillotine shears Trumpf EHT Trushear 5064 Manufacturer: Trumpf EHT Type: Trushear 5064 Year of manufacture: 2012 Condition: used Control: ELGO 50 Cutting length: 4.050 mm Cutting capacity: 6 mm drive power 15 kW max. stroke rate 201/min Weight: 10000kg Customs tariff number: 84615090 Dpsoe2 Movable back gauge Sheet holding device Front support arms Front scrap pan All documents available.

Condition: good (used), Year of construction: 2007, Functionality: fully functional, Pressing force: 320 t, Bending length [mm] 4420.00 Press force [to] 320 Control TASC6000 Windows XPe,512MB,15" touch screen Operating hours: 57747 hrs. Hydraulics on: 29028 hrs. Basic equipment: - Sturdy machine frame as welded construction in all-steel design - Pressure beam with high bending strength - Spherical bearing of the pressure beam With pressure beam inclined position - Electro-hydraulic top drive with 4-cylinder technology - Proportional valve technology and switchable double pump - Modern block hydraulics with control valves mounted control valves - Electronic pressure compensator - Measuring system with centrally mounted glass scales and temperature compensation - Manual wedge crowning integrated in the table - "New Standard Clamping" upper tool holding system Clamping" manual, hardened, self-centering centering, for vertical tool change - Lower tool holder with hydraulic clamping, hardened - Lower tool displacement programmable (pneumatic, 2 positions) - 2 axis back gauge system with rack and pinion drive for X- and R-axis, 2 stop fingers with safe adjustment from the front - Machine control: TASC 6000 - Control panel with LCD keypad, foot switch foot switch emergency open and emergency stop - Safety device: integrated side doors side doors and automatic rear roller cover - Switch cabinet cooling (air-to-air heat exchanger) - Oil cooler - Network-compatible - Modern machine design + 6-axis back gauge system + Hydraulic upper tool clamping + CNC crowning Dpr7Gl + BendGuard (for 220 mm/s) + 2nd foot switch + 2 support brackets + Bending aid first arm + ACB angle sensor preparation

Condition: excellent (used), Year of construction: 2000, Large format. Machine under Power. B7Lv027C33 Machine under power

Condition: excellent (used), Year of construction: 2017, Manufacturer: TRUMPF Model: TruLaser 8000 (L63) Year of manufacture: 08/2017, overhauled by TRUMPF purchased in 2020 with only approx. 77 beam hours Working area: 4,000 x 2,500 mm Pallet size: 4,000 x 2,500 mm Laser power: 2x 6,000 watts Current operating hours, approx: Beam on: 1. 6,500 h 2. 9,000 h Laser on: 21,000 h EXTENDED EQUIPMENT: - 2x TruFlow 6000 laser with optimized standby incl. beam tube ventilation with N2 (2 pieces) - Thin sheet metal production package for 2-head machine (high-speed, standard and compressed air cutting in thin sheet metal; includes 2 lens cutting heads with 130 mm focal length and compressed air cutting)". - focal length and compressed air cutting)" - High-dynamics package (CFRP-reinforced motion unit for maximum acceleration and rigidity) - Brightline - Coolline (2 pieces) - "Wavebelt" cross conveyor belt with tilting container (container to the right of the machine) - Control cabinet lighting - Machine up to 43°C ambient temperature (per laser) - Integrated camera 1 for process monitoring and single image transmission to the network (view of the first 2.5 m) - Integrated camera 2 for process monitoring and single image transmission to the network (view of remaining work area) - Drop&Cut - Dot matrix code (part identification) Standard machine equipment: - Working area: 2,500 x 4,000 mm - Automatic pallet changer - Closed machine frame with integrated laser unit - Motion unit for high-precision processing - Maintenance-free linear drives in all axes - Closed beam guidance - Single cutting head strategy - Cooling unit - Service bridge - Push chain drive for oversize pallets - Longitudinal conveyor belt - 19" touch color screen - Work area lighting - Cabinet for machine accessories - Position laser diode - Spraying device - Automatic nozzle cleaning - Pierceline - Focusline - Nitroline - Plasmaline Cutting Head: - Lensline with condition check - Lens cutting head with 250mm focal length - Universal cutting head quick-change device (UTI) - ControlLine: Height control and sheet outer edge detection - Lens with RFID chip Safety: - CE marking - Light barriers - Laser monitoring system - Multi-chamber extraction system - LAS 3002 compact dust extraction system - Machine cladding with Makrolon panes Data transmission: - Wireless Operation Point (as the basis for MobileControl App and Visual Online Support) - MobileControl App (activation of the machine option, app download via app store) - MDE interface - RCI Remote Control Interface, interface for automation provided by the customer - Interface for LiftMaster provided by the customer Control: - Simple workshop programming R90E0Jkovj - TruTops Laser via network access (PC to be provided by customer) - Fast post-production - Sinumerik 840D SL control system - Integrated technology data - Automatic switch-off - Production plan - Programmable cutting gas/pressure selection - Contourline - Microweld - Flyline - FastLine - Adjustline - Teleservice via Internet - Integrated e-shop Accuracy specified by TRUMPF: Position deviation, Pa: 0.05 mm Average position spread, Ps max: 0.03 mm Repeat accuracy of the re-clocking: ± 0.1 mm Positioning accuracy of the indexing: ± 0.2 mm This used machine can be inspected under production conditions. All information without guarantee - sold under exclusion of any guarantees and warranties. Subject to prior sale.

Condition: ready for operation (used), Year of construction: 2011, Operating hours: 11,500 h, Main Drive Number of axis 2 Additional Equipment Closed machine frame with integrated laser unit Motion unit for high precision processing Drives with maintenance-free AC servo Mobile vacuum unit Sheet support accessible from both sides Fastening surface for loading unit Enclosed beam delivery system Fully integrated chiller unit Slag drawer Positioning laser diode Bpnwl3Tpi This TRUMPF TruLaser 1030 laser cutting machine was manufactured in 2011. It features a CO2-Laser TruCoax 2500 with radio-frequency excitation, integrated chiller unit, and a fully automatic pallet changer. Ideal for high precision processing, it includes a 7.5" lens cutting head with height regulation and sheet edge detection. A robust choice for any shop floor with its comprehensive safety features and easy programming capabilities. For more information about this laser cutting machine, please reach out to us. Application Types Laser Cutting

Condition: good (used), Year of construction: 2016, Catalog No. : 6414 Type: TruBend 3100 Producer: Trumpf Made in: 2016 Characteristic: Control system: T3500T Pressing force: 100 t Nmzoamym Maximum bending lenght: 3060 mm Stroke: 350 mm Machine weight: 8300 kg Equipment: Back gauge - 2 axes Tool clamping: manual - lower tool. Trumpf Quick Clamp (upper tool clamping) Crowning: Kombiniertes CNC-gesteuertes und selbsteinstellendes Crowning

Condition: ready for operation (used), Year of construction: 2006, Trumpf Trumatic 3050 aka 5030 classic (L15) 6KW 2006 Trumpf Trumatic 3050 Serial: A0230A1131 Manufacturer: Trumpf Type: Trulaser 3050 Year of manufacture: 2006 Condition: used C0Srzctnta Control on: 119.000h Laser beam on: 57.000h Control system: Siemens Laser power: 6000 Watt Sheet thickness St. max: 25 mm Sheet thickness Va. Max.: 20 mm Sheet thickness Al. Max.: 15 mm Cutting heads: 10″, 7.5″, 5″

Condition: ready for operation (used), Year of construction: 2011, Operating hours: 64,300 h, Functionality: fully functional, MACHINE DETAILS Workshop overhauled, New maintenance Laser power: 2700 W X-travel: 2585 mm Y-travel: 1280 mm NC: 64300 h Laser ON: 59693 h Beam time: 21394 h EQUIPMENT - Sturdy C-frame - Coordinate guide with integrated linear magazine, 21 places for tools and clamping claws - 2 x clamping claws - Drives: Maintenance-free three-phase servomotors - Programmable hold-down device for repositioning - Sensor-monitored parts chutes 500 x 500 mm for punching and laser station, ejection cylinder on laser chute - Laser unit: TLF 2000 high-frequency excited CO2 laser, vibration-insulated, integrated in machine frame, incl. cooling unit and DIAS 3 laser controller - HI-LAS high-pressure cutting - Fast processing with SprintLas - ContourLas for producing small holes - Programmable cutting gas pressure setting - Laser cutting head: 5" lens, quick-change device, APC distance control - Lens monitoring sensor system Dpbbgl - Additional cutting head with 7.5" lens - Punching head: hydr. mono tool holder, 360° rotation for all tools, automatic tool length compensation, tool spray lubrication, 2 x lubricant containers, punching slug extraction, chip bucket - Sinumerik 840D control system, 10.4" TFT color screen, online help, diagnostic function, 3.5" floppy disk drive, RJ45 network connection - Safety: multi-beam light barriers, quick shutdown hydraulics, extraction and compact dust protection device against stray radiation on the cutting head - TLF 2700 laser incl. 7.5" cutting head for stainless steel - AutoLas Plus - MultiTool function - Thread forming function - Marking/quick beading function - 1 x additional clamping claw - Blow-out device for small parts - BNC network connection instead of RJ45 connection

Condition: excellent (used), Year of construction: 1999, inclusive: Sheetmaster, Gripmaster Dpiucr

Condition: ready for operation (used), Year of construction: 2001, Operating hours: 29,768 h, Main Drive Laser power 4 kW (CO2) Additional Equipment Pallet changer Liftmaster (loading/unloading) ROTOLAS option (tube lasering): max. tube length 3000 mm, usable enveloping circle max. 414 mm, min. 20 mm, max. chuck opening 142 mm Exhaust system with extinguishing system: Camlil (annual maintenance contract) Cooling unit (AL/CU): Annual maintenance contract (Richter company) Cross conveyor: Lehmann replica This laser cutting machine was manufactured in 2001. It features a TLF 4000 turbo laser and a processing capability of 3000x1500 for flatbed operations. Equipped with a pallet changer and Liftmaster for efficient loading and unloading, it also includes a ROTOLAS option for tube lasering. An exhaust system with an extinguishing feature ensures safety. The opportunity to buy this TRUMPF Trumatic L3030 4KW laser cutting machine is significant. For more information about this laser cutting machine, please reach out to us. Application Types C08Jdnlra8 Laser Cutting

Condition: excellent (used), Year of construction: 2016, Working area: 3000 x 1500mm Dpiubt

Year of construction: 2017, Operating hours: 7,330 h, Condition: ready for operation (used), General Data Measurements width 1750 mm Measurements depth 3385 mm Measurements height 2070 mm Machine weight 4300 kg Main Drive Laser power 500W Additional Equipment Includes a backup power supply, an equipped switchboard, a fire extinguisher, a vacuum cleaner for Ex environment. Dpsgyt This TRUMPF TruPrint 3000 3D Printer was manufactured in 2017. It features a laser capacity of 500W and a work area of 400x300mm. The machine can handle a variety of materials including stainless steel, tool steel, and titanium. With dimensions of 3385 x 1750 x 2070 mm and a weight of 4300 kg, it's designed for robust performance. For more information about this 3D Printer, please reach out to us. Application Types 3D Printing

Condition: good (used), Year of construction: 2006, Laser power: 3,200 W, Videos available Hvkmvt7K Beam On: 3200 h Laser On: 23000 h Equipment: Sheetmaster, Toolmaster, Gripmaster (no cassettes and other accessories)