Laser Pipe Cutting Machine

Trumpf Trulaser Tube 5000

Condition: like new (used), functionality: fully functional, Year of construction: 2020, operating hours: 3,956 h, machine/vehicle number: A1440D0207, controller model: Sinumerik 840D SL, laser type: diode laser, laser source manufacturer: Trumpf, laser source model: TruDisk 2001 solid-state laser, laser hours: 3,432 h, laser power: 2,000 W, sheet thickness (max.): 8 mm, pipe diameter (max.): 152 mm, travel distance X-axis: 6,500 mm, feed rate X-axis: 170 m/min, workpiece weight (max.): 130 kg, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, overall weight: 17,000 kg, total length: 16,000 mm, total width: 7,000 mm, total height: 2,800 mm, tube wall thickness (max.): 8 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Manufacturer | TRUMPF Model | TruLaser Tube 5000 fiber (T06) Machine number | A1440D0207 Year of manufacture | 01-2020 Laser power | 2,000 W / 2 kW Godpfx Acez Ii A Sjiobw Laser source | TruDisk 2001 solid-state laser, single laser output Raw material length | 6,500 mm Finished part length | 4,500 mm Maximum LoadMaster bundle weight | 4,000 kg Control | TRUMPF control system based on Sinumerik 840D SL Operator panel | Pivoting panel with 19-inch touchscreen Cutting head | Lens cutting head with 150 mm focal length Electrical supply | 400 V / 50 Hz; IEC electrical standard Bevel cutting | Not fitted Factory options Extended finished-part handling — 4.5 m The standard 3 m finished-part configuration is extended by 1.5 m, including an additional finished-part support. RapidCut Dynamic additional axis for increased acceleration during cutting movements. SeamLine Tube Weld seam detection on the outside of the tube. LoadMaster Tube with automatic setup Automatic loading system for 6.5 m raw material, with a bundle loading area rated for a maximum bundle weight of 4,000 kg. Automatic setting of compartment height and compartment width. Adaptive clamping systems Feed station equipped with additional clamping elements for L profiles, U profiles, and flat material. Feed-through chuck equipped with special clamping rollers for these material types. Brass and copper cutting packages Brass cutting package with nitrogen cutting data. Copper cutting package with oxygen cutting data. These packages do not include bevel cutting data. Machine construction and material handling Feed station with self-centering clamping jaws and a feed-through chuck with self-centering tensioning rollers. Raw-material support with automatically retractable tube supports, and finished-part support with extendable guide rollers. High-precision drives and work-area illumination. Parts deposit with one conveyor table and conveyor-table extension. Part-removal station with scrap conveyor belt and collection container. Laser and process control TruDisk 2001 solid-state laser. ControlLine, FocusLine, and NitroLine functions. Integrated technology data, programmable cutting-gas pressure, automatic switch-on and shutdown, and Condition Guide. Remote support interface, USB interface, RJ45 network interface, Central Link, and Online Update Manager. Availability of connected services is not represented as an included subscription. Factory-specified tooling Clamping-jaw pair up to Ø152 mm and round-tube form supports up to Ø152 mm. Rectangular-tube form supports described in the factory specification as “up to 29 mm, 36 mm, 43 mm, 85 mm, and 170 mm outer circle,” plus guide rollers for round and rectangular tubes. Software and documentation Original factory software package: - TruTops Tube including 3D tube construction. - 3D tube interface. - Positioning aids. - Bend connection. - TruTops Monitor complete package. Condition Condition: Excellent used condition; in perfect working order. Machine operating hours: [3956] Laser hours: [3432] Machine location: [Gabrovo, Bulgaria] Availability: [Immediate] Inspection / cutting demonstration: [Immediate] Dismantling, loading, transport, and recommissioning: Scope and costs to be agreed separately. We will provide full support for loading and arranging the transportation.

Condition: good (used), functionality: fully functional, Year of construction: 2006, The machine is being sold due to a plant modernization. Only 3,000 operating hours. Immediately available. Machine already disassembled. Gbsdjzlr Rpspfx Aciow Technical data: Manufacturer: TRUMPF Model: TruLaser Tube 5000 (T01) Year of manufacture: 2006 Control system: Siemens Sinumerik 840D Laser type: CO₂ laser TruFlow Working area, tube length: 6,500 mm Max. round tube diameter: 150 mm Max. rectangular profile / circumscribed circle: 150 mm Max. material weight: 20 kg/m Max. workpiece weight: 130 kg Automatic tube support Self-centering clamping technology

Condition: good (used), functionality: fully functional, Year of construction: 2007, laser type: CO₂ laser, laser power: 2,700 W, X working range max.: 6500 mm Y working range max.: 200 mm Laser power: 2700 watts Control system: SINUMERIK 840D Standard equipment: Gjdpfxs Ahkc Ts Acisbw - Robust machine frame with integrated laser unit - CO2 laser TruFlow 2000, high-frequency powered, cooling unit - Drives: Maintenance-free three-phase AC servomotors - NitroLine high-pressure cutting - Fast processing with SprintLine - Cutting gas pressure setting programmable - Laser cutting head with 5’’ lens - Cutting head quick-change system - Laser power control - Laser logbook function - Automatic shutdown - Work area lighting - Control system Sinumerik 840D: Open control system based on PC, easy operation, online help, diagnostic function, maintenance logbook, technology data, remote service, 3.5’’ floppy disk drive, RJ45 network connection - Safety: Multi-beam light barriers, beam guidance completely enclosed and ventilated, compact dust collector, protective cabin - Unloading station PRS 3001 with brush table - Clamping jaw set D 20-85mm and D 85-150mm Optional equipment: + 2000 on Laser TruFlow 2700 + SeamLine Tube + LoadMaster Tube 6.5 m with bundle trough + Unloading station 6m with belt table + Focus line

Condition: good (used), Year of construction: 2009, laser type: CO₂ laser, laser power: 3,200 W, X working area max.: 6500 mm Laser power: 3200 watts Control: SINUMERIK 840D Standard equipment: - Robust machine frame with integrated laser unit - CO2 laser TLF 2000, high-frequency excited, with cooling unit - Drives: Maintenance-free three-phase servo motors - Hl-LAS high-pressure cutting - Fast processing with SprintLas - Programmable cutting gas pressure adjustment - Laser cutting head with 5" lens, DIAS III - Quick-change device for cutting head - Laser power control - Laser logbook function - Automatic shut-off - Work area lighting - Control system SINUMERIK 840D: Open PC-based control, easy operation, diagnostic functions, maintenance logbook, technology data, teleservice, 3.5" floppy disk drive, RJ45 network connection - Safety: Multi-beam light barriers, fully enclosed and ventilated beam guidance, compact extractor, protective cabin - PRS 3001 unloading station with brush table - Chuck set D 20-85 mm Special equipment: + Upgraded to Laser TruFlow 3200 + SeamLine Tube + LoadMaster Tube 6.5 m, rear + Focus Line Gbjdpfx Ae Ahi Trscijw

Condition: ready for operation (used), Year of construction: 2008, laser power: 3,200 W, travel distance X-axis: 7,100 mm, number of axes: 4, This 4-axis TRUMPF TruLaser Tube 5000 was manufactured in 2008. It features a powerful CO₂ laser source with a laser power of 3.2 kW and a maximum X-axis travel of 7,100 mm. The machine includes an automatic bar loading and unloading system, enhancing efficiency. If you are looking to get high-quality tube cutting capabilities, consider the TRUMPF TruLaser Tube 5000 machine we have for sale. Contact us for further details. • Max. tube diameter: Ø159 mm • Current status: Under power • Inspection/test: Available for visit and testing • Maintenance: Maintenance carried out by TRUMPF Italia • Known technical issue: Weld seam detection/control not working Gbjdj Ad Ib Ejpfx Acijw Additional equipment • Automatic bar loading system • Automatic loading length: 2,000–6,500 mm • Maximum loadable bar length: 7,100 mm • Automatic unloading system • Unloading support length: 4,500 mm

Condition: ready for operation (used), Year of construction: 2015, operating hours: 67,121 h, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D SL, laser power: 3,200 W, travel distance X-axis: 6,500 mm, travel distance Y-axis: 310 mm, travel distance Z-axis: 170 mm, overall weight: 17,000 kg, total height: 2,800 mm, product length (max.): 16,000 mm, number of axes: 5, Tube cutting machine manufactured in 2015. This TRUMPF TruLaser Tube 5000 features a working range of 6500 mm in the X-axis and 310 mm in the Y-axis, with a maximum workpiece length of 3000 mm. It supports various tube diameters and has a maximum workpiece weight of 130 kg. If you are looking to get high-quality tube cutting capabilities, consider the TRUMPF TruLaser Tube 5000 machine we have for sale. Contact us for further details. • Working range A1 axis (pulling chuck): n x 360° • Working range A2 axis (feed station): n x 360° • Workpiece max. length of raw material: 6500 mm • Workpiece min. length of raw material: 3000 mm • Workpiece min./max. outer diameter (circular): 20–152 mm • Workpiece min./max. side length (rectangular, at max. circumscribed circle 170 mm): 20–150 mm • Workpiece max. length of finished part: 3000 mm • Workpiece min. length of tube remnant: 120 mm • Workpiece max. scrap length: 400 mm • Bundle dimensions max. cross-section: 600 x 750 mm • Bundle dimensions max. weight: 4000 kg • Material weights max. workpiece weight: 130 kg (loading 6.5 m) • Material weights max. workpiece weight per meter: 20 kg/m • Speeds X axis (+): 170 m/min • Speeds X axis (-): 100 m/min • Speeds Y axis: 60 m/min • Speeds Z axis: 60 m/min • Speeds A axis: 780 °/s • Positioning accuracy, position deviation Pa: ±0.2 mm / ±0.015° • Positioning accuracy, mean position dispersion Ps: ±0.06 mm / ±0.005° • Smallest programmable path length: ±0.01 mm / ±0.001° • Lens cutting head focal length: 155 mm • Depth 7000 mm; Length 16000 mm (loading 6.5 m, unloading 3 m) • Laser on hours: 15786 Additional equipment • Option to reduce minimum circular tube outer diameter to 15 mm (from 20 mm) Gbedpfezlq I Hox Aciew • Option to reduce minimum rectangular tube side length to 15 mm (from 20 mm) • Option to increase max finished part length to 6500 mm (from 3000 mm) • Option “Length of finished parts +1.5 m”: adds 1500 mm to finished part length • Optional 8.0 m loading system: increases max workpiece weight to 160 kg (from 130 kg)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, operating hours: 8,416 h, laser power: 3,200 W, sheet thickness steel (max.): 10 mm, sheet thickness aluminum (max.): 4 mm, pipe diameter (max.): 152 mm, working length: 6,500 mm, TRUMPF Tube Laser Cutting System with LoadMaster Tube 6.5 m and extensive additional equipment! TECHNICAL DETAILS Maximum tube diameter: 152 mm Maximum working length: 6,500 mm Material thickness (steel): 10 mm Material thickness (stainless steel): 5 mm Material thickness (aluminum): 4 mm Laser power: 3,200 W MACHINE DETAILS Control system: SIEMENS Sinumerik 840D SL Operating hours: 24,428 / 8,416 h EQUIPMENT - LoadMaster Tube 6.5 m with bundle magazine - Robust machine frame with integrated laser unit - Feed station with self-centering clamping jaws - Raw material tube support with automatically retractable pipe rests - Through-feed chuck with self-centering parallel clamping rollers - High-precision drives - Discharge station for finished workpieces up to 3 m in length - Tube support for finished parts with extendable guide rollers - Scrap conveyor with collection bin - Enclosed beam guide - NitroLine - FocusLine - Laser power control - Programmable cutting gas pressure - Automatic power on/off - Ergonomic control panel with touch color screen - Work area illumination - High-frequency excitation - Maintenance-free turbo radial blower - TASC 3 laser control - Laser logbook function - Cooling unit - Single cutting head strategy - Lens cutting head, 155 mm focal length - ControlLine - Simple operation - Online support - Diagnostic functions - Integrated technology data - Remote service via internet - RJ45 network interface and USB port - CE marking - Multi-beam light barriers - Monitoring system for gas pressure, temperature, and cooling water, among others - Compact dust extraction system - Protective enclosure with polycarbonate (Makrolon) panels Gjdpfx Ajygu Tkjcisbw - Jaw sets with clamping range 20–85 mm and 85–152 mm - Quick-change forming shells for round tubes up to 152 mm - Quick-change forming shells for rectangular tubes (up to a circumscribed circle of 85 mm) - Quick-change forming shells for rectangular tubes (up to a circumscribed circle of 170 mm) - Guide rollers for round and rectangular tubes - SeamLine Tube with inner seam detection - Adaptive clamping technology – feed station, small circumscribed circle - Adaptive clamping technology – feed station, large circumscribed circle - Adaptive clamping technology – through-feed chuck, small circumscribed circle - Adaptive clamping technology – through-feed chuck, large circumscribed circle Note: The machine will be dismantled on 02/03/2026 and can be inspected under power until then.