Laser

TRUMPF Tubematic

Year of construction: 2004, condition: excellent (used), Technical data TRUMPF TUBEMATIC Max. outer circle diameter: 150mm Max. tube material length: 6500mm Max. finished part length: 3000mm Max. finished part length with larger model (option): 6000mm Max. workpiece weight: 20kg/m Max. wall thickness with TruFlow 2000 - Mild steel : 6,4mm - Stainless steel : 4mm - Aluminium : 3mm Max wall thickness with TruFlow 2700 - Mild steel: 6.4mm - Stainless steel: 5mm - Aluminium: 4mm Max wall thickness with TruFlow 3200 - Mild steel: 6,4mm - Stainless steel: 5mm - Aluminium: 4mm Controller/Standard part program memory SINUMERIK 840D / 500 MB Working range in X-axis for tubes 6500mm Laser TLF 3200 incl. lens monitoring sensors HI-LAS high pressure cutting Laser cutting head with 5” lens Quickchange device for cutting head Capacitive height regulation (DIAS III) Progr. Cutting gas selection /pressure setting Programmable power cycles SprintLas Logbook function laser Light fittings for working area Compact Dust Extractor Isdpeh Nu Diefx Agdeap Automatic shut-down device Safety Devices RJ45 network connection including installation 3.5” disk drive Set of clamping jaws D20-85mm and D 85-150mm Form cups and form rollers for round tubes Accessories (each 2 cutting nozzles 1,0/1 4/1, 7mm 1 x ceramic part) Incl. part removal station PRS 3001 with brush table Part removal station PRS 3000 with sorting instead of PRS 3001 Flat metal conveyor for PRS 3000 with container angled metal conveyor for PRS 3000 AutoLas Plus Preparation weld seam sensing Automatic loading device with bundle magazine LD6000 (plastic rollers)

Condition: good (used), functionality: fully functional, Year of construction: 2003, laser type: CO₂ laser, laser power: 2,700 W, X working area max.: 6500 mm Laser power: 2700 watts Control: SINUMERIK 840D Standard equipment TRUMPF loading unit: - Tube feeder for round, square, and rectangular tubes via buffer section with X-stop for tube lengths min. 3 m and max. 6 m - Semi-finished product length measurement - Transfer unit to the machine - Tube magazine with tube separation, alignment, and transfer to tube feeder, max. bundle weight 4000 kg - Good parts removal up to max. 3,000 mm with chip conveyor - Additional tube supports - Tube handling unit: Rotating and feed station: Rotating clamping unit with pneumatically actuated clamping jaws for tube lengths up to 6000 mm and tube diameters of d = 20 - 150 mm, 2 clamping ranges: d = 20 - 85 mm and d = 85 - 150 mm - Carriage unit with linear guidance - Feed station with motor drive, including connection for extraction - Tube support: Between tube support and traverse chuck, five automatically retractable support elements with form shells are provided - Traverse chuck: With a passage of d = 150 mm - The tubes are positioned via the clamping jaws centrally in the Y and Z axes relative to the rotational axis for the cutting process Iasdpfxoytfyzj Agdop - 2 sets of clamping jaws for round, square, and rectangular tubes (simple design), clamping range 20 - 85 mm, 85 - 150 mm - Good part removal (unloading cabin for round and rectangular tubes) - Sorting options: 2 finished parts (front and rear), 1 flat - Scrap conveyor; programmable sorting; max. scrap length 300 mm (collection container, scrap belt) - Finished part length up to 3000 mm can be automatically unloaded (front and rear) Safety equipment: - Compact extraction unit Filter system designed for the separation of airborne particles produced during laser cutting of metals - Light barrier: Loading area secured by light barriers - Protective cabin: In the area of the cutting head, a Macrolon sheet metal combination is installed for laser radiation protection - Chip conveyor: Conveyor belt for discharging cut remnants - Operating manual

Condition: used, functionality: fully functional, Year of construction: 2005, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, pipe diameter (max.): 250 mm, pipe length (max.): 6,000 mm, power: 60 kW (81.58 HP), input voltage: 400 V, Equipment: cooling unit, emergency stop, For sale: TRUMPF TUBEMATIC Tube Laser Cutting Machine – Fully Equipped. The machine was used in industrial production and is in full working condition. Professionally dismantled and preserved in complete configuration. Scope of supply: Iasdpsyfnblsfx Agdep - Bed and mechanical components - Electrical cabinets with original TRUMPF electronics - Drives, control units, power modules - Cooling system (chiller) - Cable tracks, sensors, wiring, etc. Machine technical specifications: X-axis travel: 6500 mm Y-axis travel: 200 mm Z-axis travel: 150 mm Workpiece sizes: Stock length * For manual loading: 141–6500 mm * For automatic loading: 3000–6500 mm Max. finished part length: 2000 mm Min. tube remnant length: 141 mm Wall thickness: 0.8–6.4 mm Round tube dimensions: Ø20–Ø150 mm Square profile dimensions: 20x20–120x120 mm Rectangular profile dimensions: 20x20 – max. oval Ø150 mm Workpiece weight: Max. workpiece weight: 120 kg Max. workpiece weight for unloading station: 40 kg Max. bundle weight: 4000 kg Speeds: X-axis: 100 m/min Y-axis: 40 m/min Z-axis: 40 m/min A-axis: 720 º/s Positioning accuracy1: Position deviation: ±0.2 mm Average range deviation: ±0.06 mm According to VDI / DGQ 3441, the measured length is 1 m. Processing accuracy depends on material type, its preprocessing, dimensions, and position in the working area. Control system: CNC TRUMPF – Siemens Sinumerik 840 D Total weight of the basic machine configuration: 15,460 kg Laser data: TRUMPF TLF CO₂ laser with high-frequency excitation – TLF 2000 Guaranteed max. laser power (programmable in 1% steps): 2000 W Pulse repetition rate: TEM00 Gas consumption: Laser gases *CO₂ – 1 l/h *N₂ – 6 l/h *He – 13 l/h Cutting gases *O₂ – depending on application *N₂ – depending on application Laser cooling: closed circuit Maximum power requirement for full system: 63 kW/h Pneumatic connection: 7–10 bar