Wood shredder

Untha LR630

Condition: excellent (used), Year of construction: 2014, operating hours: 1,168 h, functionality: fully functional, machine/vehicle number: LR065411, power: 18.5 kW (25.15 HP), Technical data: - Motor voltage: 400 V (50Hz) - Suction connector: 160 mm, without discharge screw conveyor - Belt drive with two-stage plug-on gearbox and elastomer damper Hodpfxezwcr Ie Anyou - Feed opening: 624 x 792 mm - Hydraulic power: 0.75 kW - Rotor speed: 98 rpm - Screen perforation: 15-20 mm - Cutting system: Rotor - Version: smooth - Number of knife rows: 1 - Number of cutting tools: 17 - Version cutting tools: ÜSS - Rotor length: 630 mm - Rotor diameter: 248 mm

Condition: used, Drum wood chipper IDC000025 Hjdetqz Sfjpfx Anyou - Manufacturer: Erjo, - Model: 204 MA, - Electric motor: 55 kW, - Capacity: 20-40 m3/val.

Condition: used, Year of construction: 2003, operating hours: 10,120 h, total length: 1,800 mm, total height: 1,700 mm, total width: 1,200 mm, Colour: Grey Empty weight: 1.300 kg Price: On request Shredder Untha LR 630 Year of construction 2003 Input opening: 624 x 792 mm Throughput speed: material and sieve dependent Rotor diameter: 248 mm Rotor speed: 86 - 96 rpm Engine power: 15 kW Cutting system: 17 knives Sieve diameter 24mm Transport dimensions 1800*1200*1700mm (L*W*H), Weight 1300kg - Year: 2003 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: LR632318 - Operating hours: 10120 - Transport dimensions: 1800mm x 1200mm x 1700mm (l x w x h) Hsdpfxjwh Na Ne Anyju - Transport weight [kg]: 1300kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 3 h, functionality: fully functional, power: 18.5 kW (25.15 HP), overall weight: 1,300 kg, The LR630 is a true classic among single-shaft shredders and stands out above all for its excellent price/performance ratio. It is typically used in joinery workshops processing residual wood amounts between 1 and 7 m³ per week. The sophisticated machine design features a horizontal pusher. The hydraulic unit is space-savingly integrated into the machine housing, where it is protected from dust and dirt. To protect your wood shredder from potential damage to the cutting system, the LR630 is equipped with an automatic foreign object detection system including automatic shutdown. In addition, a reversing automatic prevents the motor from being overloaded. Hsdpjy Sk Tfsfx Anyju Further technical data: - Motor voltage: 400 V (50Hz) - Suction connector: 160 mm, without discharge screw conveyor - Belt drive with two-stage plug-on gearbox and elastomer damper - Feed opening: 624 x 792 mm - Hydraulic power: 0.75 kW - Rotor speed: 98 rpm - Screen perforation: 15-20 mm - Cutting system: Rotor - Version: smooth - Number of knife rows: 1 - Number of cutting tools: 17 - Version cutting tools: ÜSS - Rotor length: 630 mm - Rotor diameter: 248 mm

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 1,685 h, maximum speed: 80 km/h, overall weight: 11,500 kg, total height: 2,500 mm, total length: 9,720 mm, total width: 2,300 mm, mobility: mobile, machine/vehicle number: 11520, For sale is this used Husmann HFG IV (HFG4) shredder, year of manufacture 2016. Operating hours: 1685 h All 60 flail tips were replaced just a few operating hours ago. Some spare flails are still available and will be included in the sale. All 8 V-belts were also replaced just a few operating hours ago. Both NOx sensors as well as AdBlue sensors are new. Important note: Drawbar is bent, therefore currently not road-legal. Hodoy Hi D Sopfx Anysu Throughput: 60-100 m³/h depending on material and feeder equipment Recommended max. log diameter: 200 mm Machine No.: 11520 Max. revolutions per minute: 1200 rpm Operating voltage: 24 V Operating pressure: 160 bar Power: 205 kW Permissible total weight: 11,500 kg Manufacturer’s Description: FLAIL SHREDDER HFG VI "These powerful Husmann machines, designated “HFG (Husmann forestry equipment)”, achieve a uniform, fine, and clean shredding result thanks to their special beating technology and flail arrangement. The shredded material is fed via a spacious intake hopper with forged steel chain conveyor to the infeed roller and onward to the flail rotor. The pendulum-mounted infeed roller is guided by rack-and-pinion and driven hydraulically by a large reduction gearbox. Adaptable to the material being fed, the roller can also be operated and lifted by remote control. The roller or feed aperture of 460 mm ensures smooth and fast feeding. The robust rotor, made from high-grade steel (1000 kg), reinforced with additional bracing and mature construction techniques, is break-proof even when processing heavy foreign materials. Sixty free-swinging flails are arranged in offset positions on eight hardened flail shafts. The quick-change system allows the carbide-tipped flail tips to be bolted on to the flail holders. With the large number of 50 mm wide flails and the rotor’s direction of rotation across a breaker bar towards the infeed belt, the shredding material is optimally fragmented and made compostable. The load-dependent and continuously adjustable feeding speed of the scraper floor and infeed roller allows further influence and improvement of the output product quality. The rotor trough and discharge area design allows for windrow heights up to 2.5 meters. The powerful 205 kW auxiliary engine is easily accessible through large service doors, making operation and maintenance simple. Clear controls and safety features such as rotor overload protection and a reversing device are quality hallmarks of our plant. The mobile shredding unit is equipped with an 80 km/h running gear and air brakes, and can be configured either stationary or with a hooklift frame. The HFG IV is a composting machine for organic and inorganic waste, suitable for mechanical feeding." If you have any questions or require further information, feel free to send us a message or give us a call.

Condition: used, machine/vehicle number: 10657, Rotor diameter: approx. 368 mm Rotor width: approx. 1270 mm Hodpfsznpc Usx Anyou Number of rotor blades: approx. 60 Stator blades: one row Drive motor: 37 kW