Double head welding machine

Urban AKS 1200

Condition: ready for operation (used), Technical characteristics 2 straight welding heads, one mobile head CN command Hu3Phus Adjustment for heating time, hardening, welding temperature, fusion and cutting pressure ascending heating plate rapid changing in function of elements width Power and Motors Power: 4 Kw Overall dimensions

Condition: good (used), Year of construction: 1995, for welding profiles at an angle of 30°-180° C93Cqbm with welding bead limitation 2 mm

Condition: used, Year of construction: 1998, Urban Welding machine type AKS 5210/5F Ulbcefygzl

Condition: used, Year of construction: 1992, Machine/vehicle number: 38032, Single head welding machine B30Q97If

Condition: used, Year of construction: 2011, Available from October 2025 1st Urban AKS 6405 - Year of construction 2011 - Min. welding dimension: 323 x 382 mm - Max. Sealing dimension: 2300 x 2520 mm - Applied profile systems: Veka Softline 70, Topline 70, Swingline 70, Softline 76, Softline 82, Topline NL, Softline NL, Alphaline 90, Topline Plus - Weld bead limitation 2 mm (no stainless steel blades) - Operating system: Windows XP 2nd Urban SV 530 - Year of manufacture 2005 - Incl. Urban WT turning station + cooling station - Operating system: DOS (complete PC replaced in 2023) - Various components replaced (DARC V05-10-20 supply module in 2018) C93Bmta - Cutter for 2.5 mm groove (no V-groove)

Condition: good (used), Year of construction: 2009, Year: 2009 - technically efficient, ready to work - after full service Uct8Gdio9V - flow limitation 2 mm - support arms - PLC driver

Condition: good (used), Year of construction: 2004, Four-head welding machine URBAN AKS 1605, year of manufacture 2004, running direction from right to left, industrial PC, Windows control, welding dimensions max. 2.5 x 2.3 m, high clamping dimension, good condition, available from end of February 2024 E7Y8Svk8 Cooling table optional

Condition: reconditioned (used), Functionality: fully functional, Total width: 620 mm, Total length: 1,450 mm, Cleaning and welding line URBAN- AKS 1610+TBA+SV 530/WT 530 working direct from right to left Whole line is 6200mm widht and 14500mm long. AKS 1610: weld beat limitation 0.2mm - horizontal 4-head welding machine for vinyl window profiles in 90º angle - equipped with an integrated discharge system for conveyance to cleaning machines - electronic positionig - SPS central control with keyboard and display -PLL parallel welding system - as standard increasing corner strengthup to 20% - dimensions of welded elements: min. 410 x 370 mm (width X hight Y ) Blh3F0Tirrz max. 3500 x 2300 mm (width X hight Y ) -equipped with gasket moulder for 4 welding heads TBA Conveyor table (between welder and cleaning machine) - widht 2600 mm, lenght 3500 mm,8 guide rails Driven, for automatic production lines. Electrically-driven conveyor table, transport belts with velour or super grip coating. Linking of several conveyor tables is possible. SV 530 CNC corner cleaning machine - up to 17 tooling locations - 2 axis - PC with freely programmable CNC control, to be programmed at screen - simple programming of machining steps in group technique, single program selection, list or automatic - operator-friendly diagnosis and service routine. Standard equipment : - inner frame stop - 2x cutting/grooving knife unit NO/NU - 1x disk cutter with saw blade 5mm (SF) - 2x inside grooving knife unit IO/IU Profile height : min. 30mm, max. 130mm/200mm Profile width : min. 20mm, max. 150mm inner frame dimension : 210mm x 210mm incl. turning device WT-530 Dimentions: widht: 6200 mm, lenght: 14500 mm Completely refurbished, 6 months warranty on parts. Ready for work To be viewed at the company's headquarter PRICE: 100000 €

Condition: excellent (used), Year of construction: 2006, Functionality: fully functional, AKS 6810/6-35/25 Six-head welding machine used, 4 angle and 2 transom welding heads, incl. outfeed transport, parallel feed method of the welding slides to increase the corner strength, heated welding bead limiter 0.2mm with NIROSTA blade on top and bottom side, device for compensating the + and - tolerances when cutting profiles, frame limiter from 35-200mm on angle heads, industrial PC control with Windows, welding dimensions outside max. 3500mm x 2500mm (length Y x width X), left stop, seal former with turret, etc. Zrqpztlka

Year of construction: 1983, Condition: used, no. of the heads 1 working range 30-180 Grad Profile height max. 130 / 200 mm pressure 7 bar dimensions ca. 770 x 880 x 1590 mm weight ca. 320 kg Dkhaaj

Condition: good (used), Year of construction: 2001, Year: 2001 Eilrmfqi - technically efficient, ready to work (directly from the client) - corner cleaning machine SV 494 CNC - for-head welding machine AKS 6110 - turning station - cooling station - flash limitation: 0.2 - 2 mm

Condition: excellent (used), Year of construction: 2005, 4-head welding machine URBAN AKS 6810, maximum welding mass = 3,500 x 2,700 mm, welding bead limitation 0.2 mm, seal hold-down device, running direction from right to left, Windows control, year of manufacture 2005, welding mirror temperature digitally adjustable, welding bead limitation bottom and top separately adjustable in the program, Jngrxrxs

Condition: good (used), Year of construction: 2003, Single head PVCu window welding machine in excellent working condition. Ready for work. Upnsrzm28D

Condition: good (used), Year of construction: 2010, Complete Urban welding line consisting of 4 head welding machine with double corner polisher and fully automatic sorting and storage unit for UPVC windows. Q7Qmp

Condition: excellent (used), Year of construction: 2007, 4 point welding machine with gasket holder, data transfer to corner cleaner, Huy87Gw

Condition: good (used), Year of construction: 2007, Type of input current: three-phase, Pressure: 6 bar, Input voltage: 400 V, Double head PVCu window welding machine. Fully functional. Currently in the factory at work. A fairly simple, easy-to-use machine. Cndut3Rgae

Condition: ready for operation (used), Year of construction: 2006, Functionality: fully functional, Type of input current: three-phase, Double head PVCu window welding machine. Fully functional. Currently in the factory at work. A fairly simple, easy-to-use machine. Ghwdfl0A

Condition: good (used), Year of construction: 2003, Functionality: fully functional, Excellent three head welding machine for PVCu windows Cwwverdamw

Condition: new, Year of construction: 2024, Functionality: fully functional, Machine/vehicle number: GM-1400H, Total width: 3,000 mm, Total length: 5,000 mm, Total height: 3,250 mm, Type of input current: three-phase, Outer dimension length: 1,150 mm, Energy consumption: 60 kWh, Input current: 80 A, Workpiece weight (max.): 2,720 kg, Outer dimension width: 1,400 mm, Power: 48 kW (65.26 HP), Workpiece height (max.): 950 mm, Warranty duration: 1 months, Working range: 319 mm, Chambers: 3, Equipment: Adjustable Chassis, Conveyors are produced in such a way that they will not scratch the glass and leave no stains. The machine is made of steel and aluminum materials. Thanks to specially designed water sprays and brushes, the glasses comes out completely free from oils, stains and dust and cleaned. Angles of water nozzles will be adjustable. Conveyor rollers are produced of Ø 55 mm vulcanized rubber . Induction hardened gears are used in transmission gears. There will be 3 Washing Cabins, pre-washing, washing and rinsing washing system. In the pre-washing section, the upper and lower surfaces of the glass are washed with high-pressure spray nozzles. In the same cabin ,will be compressed air to the upper surface of the glass with air knife and the water will be completely cleansed. Thanks to this process, the glasses will go into the wash without entering the brush washing compartment, free from their dirt. There are 6 Brushes (Ø 120 mm.) in the Washing Machine and they will be able to wash laminated glasses. 2 of the brushes will be in the inlet (pre-wash) and 4 in the outlet (rinse-wash). there are brushes in total, 2 piece of them at the entrance and 4 pieces at the exit. 2 of the brushes will be suitable for laminated glass washing. the other 4 brushes will be for normal standard use. Features of brushes to wash laminated glass is ; Bristle material will be 6.6 P.A. The bristle diameter will be 0.15mm. The bristle length will be between 30-35 mm. Brush shaft will be produced of ASI 304L quality stainless material. During washing, the brush suitable for the laminated coated glass, whose properties are given above, will come into contact with the surface of the glass. To the other part of the glass will come into contact standard glass washing brush. The washing and air drying section will have an elevator system with a 350 mm opening and closing structure for maintenance and cleaning. Thanks to the elevator, the glass thickness (3-19 mm) can be adjusted easily. The speed of the conveyors will be adjustable between 0 m/min and 5 m/min. There will be a sound insulation cabinet in the drying fan. Blzq0No2Vqt 1 piece of G4 filter and 1 piece of F7 filter will be at the air inlet of the drying fan . The filters will be of standard size and can be changed and will be 592*592*20 mm square type. 23. Thanks to the powerful air knives, the glasses will come to the exit conveyor dry. The height of the air knives will be adjustable. All pipes and hoses in the machine will be in a matte color to prevent algae formation in daylight. 26. Digital displays and many electronic equipment will be Delta or Schneider brand. There will be a stop sensor at the exit of the conveyor to prevent the glass coming from the machine from falling to the ground. There will be lighting system in the washing exit area for quality control from the bottoms and top of the conveyor towards the glasses. These lightnings will have the ability to be switched on and off separately. There are 3 separate water tanks in the machine. There will be an overflow water line that will prevent the water in the water tanks from overflowing.

Condition: new, Year of construction: 2024, Functionality: fully functional, Travel distance X-axis: 1,700 mm, Travel distance Y-axis: 420 mm, Travel distance Z-axis: 300 mm, Rapid traverse X-axis: 400,000 mm/min, Rapid traverse Y-axis: 30,000 mm/min, Rapid traverse Z-axis: 30,000 mm/min, Feed length X-axis: 1,700 mm, Feed length Y-axis: 420 mm, Feed length Z-axis: 300 mm, Feed rate X-axis: 5,000 mm/min, Feed rate Y-axis: 5,000 mm/min, Feed rate Z-axis: 5,000 mm/min, Nominal power (apparent): 19 VA, Torque: 70 Nm, Controller manufacturer: Heidenhain, Controller model: TNC 620, Workpiece length (max.): 1,700 mm, Workpiece width (max.): 420 mm, Workpiece height (max.): 300 mm, Workpiece diameter (max.): 300 mm, Overall weight: 3,700 kg, Spindle speed (max.): 6,000 rpm, Equipment: Rotational Speed Infinitely Variable, URBAN AP 1700-B The machine is new and will be ready for the AMB in Stuttgart. AUTOMATIC PROFILE PROCESSING CENTER AP1700-B SPECIAL LENGTH ARTICLE NO.: 40299 BASIC TYPE Processing length: 1700 mm Working range X / Y / Z : 1700 mm / 420 mm / 300 mm with machine hood can be opened pneumatically upwards Operating terminal can be moved along the machine length with Heidenhain TNC 620 CNC control incl. Heidenhain HR130 handwheel Control cabinet and protective fencing SUPPORT TABLE LENGTHWISE AP 1700-B ARTICLE NO.: 404349 With T-slot rails size 16, mounted lengthwise to the X-axis Support surface: 1780 x 420 SPINDLE UNIT 5.5 kW, up to 6000 1 /MIN ARTICLE NO.: 40 320 Milling spindle unit SK 40 Main spindle motor 5.5 KW S1 / 7.9 kW S6 Dpihep Speed range: 100 to 6000 1 /min Torque 70 Nm Tool holder: SK 40 / DIN 69871, form A Drilling capacity in St 60 / aluminum: 24 mm / 28 mm Thread in St 60 / aluminum: M18 / M24 Tool clamping system Spring assembly Retraction force 9 KN TOOL CHANGER PLATE MAGAZINE ARTICLE NO.: 40 340 Traveling disk magazine for 12 tools / Sk40 Changing time : approx. 10 sec. Max. tool length 230 mm Max. tool diameter 100 mm COOLANT SYSTEM (EMULSION) ARTICLE NO.: 40 344 Delivery rate: 40 - 60 l/min, Tank capacity: 230 l The container is pushed under the machine bed on rollers. Incl. fill level monitoring CHIP TRAY WITH 2 DRAWERS ARTICLE NO.: 40324

Year of construction: 2023, Condition: new, Manual die cutting and creasing Youbond ML-1200 Egjbzc8Zxj Inner chase size (mm): 1200 x 820 Max. rule length (m):

Condition: ready for operation (used), Technical characteristics inferior milling Ujowalp8Mn countour milling of interior angles with tilting and curved surfaces Power and Motors Overall dimensions

Condition: good (used), Year of construction: 1996, for processing 90° plastic profiles Cccm7Rc with cutter shaft holder for three cutter sets with upper and lower grooving knives with profile insert

Condition: excellent (used), CATALOG NO. 6901 TECHNICAL DATA - max turning length 1200mm - max turning diameter 210mm - max turning diameter with a standard 90mm steady rest - max dimension of square material for turning with automatic feeding 100mm - 3 hydraulic copiers - additional 3 knives on hydraulic pistons (2 pcs) - 4 types of spindle rotation - automatic or manual operation of the machine Cqkhhjvzx3 - headstock spindle motor 9kW - 3kW hydraulic pump motor - diameter of the exhaust connection 90mm - dimensions for transport length/width/height 3700x2100x2000mm - weight about 3000 kg ADVANTAGES – Italian production – automatic hydraulic copier – original DTR documentation – unpainted – used lathe, very good condition Net price: PLN 69900 Net price: 15886 EUR Net price calculated according to the exchange rate of 4.4 PLN/EUR (with larger exchange rate fluctuations, the price may change)

Condition: used, Technical data Number of tools 1 Number of cleaning stations 1 Cpbdwgzcu Profile height max 70 mm Main motor 1.5 kW Cut-off unit Cleaning unit milling cutter Total connection 1.5 kW Space requirement Length 1,15 m Space requirement width 1,35 m Space required height 1,53 m