Center lathe

Used Harrison V350 Gap Bed Centre Lathe

Condition: used, Year of construction: 2019, machine/vehicle number: LC591, Used complete bottling line for CSD in PET and glass - 8000 bphTechnical Specifications & Performance DataThis complete used bottling line is engineered for beverage production with PET and glass bottles. Optimized for water and carbonated soft drinks, it combines reliable filling, labeling, and end-of-line packaging with robust utilities and process equipment. The line integrates components from reputable manufacturers to deliver consistent quality and uptime in industrial packaging environments.Production speed: up to 8,000 bottles per hourCompatible bottle formats: 0.33L, 0.5L, 0.75L, 1.0L, 1.5L, 2.0LContainers: PET and Glass bottlesMain filler/capper/rinser: Sinkrofill 40/50/10/10, 50 filling heads, 3–5 capping headsBlow molder: Easy Blow 4L (4,200 bph nominal)Labelers: Gernep Rollfed 8-480-1RA (foil/OPP) and Gernep Soluta 10-640 3SK (paper), up to 10,000 bphPack & handle application: SMI LSK 30 T Ergon shrink wrapper, SMI Pack HA-25 SX handle applicatorPallet logistics: Sinkrotech APM-6000-JU palletizer; Atlanta Mytho-A pallet wrapper; auxiliary manual wrapperProcess & utilities: GEA pasteurization station HTF 3000PIN/19; GEA CIP station; Trane Tracer CH535 CGAX/SXAX chiller; Therminus steam boiler (456 kW); Kaeser compressors (CSDX 165 and N 502-G boosters)Inspection & coding: FT System control for volume/cap/label; Hitachi UX printerAdvanced Automation & Control SystemsThe line features modern automation and quality assurance for stable operation and repeatable product quality. A PLC-controlled architecture coordinates rinsing, filling, capping, labeling, and packaging, while inline inspection and coding ensure compliance and traceability.PLC/HMI: PLC installed for centralized control and recipe managementInspection: FT System for volume, cap presence/position, and label verificationElectrical: 400V, 50 Hz, 16A reference (component level)Coding: Hitachi UX inkjet printer for date/lot markingChangeovers: Designed for multiple bottle formats across PET and glassSafety: Standard guarding and emergency-stop circuits across stationsProduction Line Integration CapabilitiesBuilt for flexible beverage production, the line integrates upstream preform handling and blow molding with downstream conveying, labeling, and packaging. Vetromeccanica air conveyors and line conveyors provide smooth bottle transport and accumulation.Upstream: Preform conveyor and hopper, Easy Blow 4L blow molderConveyors: Vetromeccanica Eolo air and line conveyor systemsFormat flexibility: 0.33L to 2.0L across PET and glassEnd-of-line: Shrink packaging, handle application, palletizing, and pallet wrappingUtilities integration: Chiller, steam boiler, compressors, air tanks, water... Ncodsyhbibjpfx Akysr

Condition: like new (used), Year of construction: 2017, functionality: fully functional, We are offering this as-new REDA CM/200 vacuum evaporator, year of manufacture 2017. Manufacturer: REDA S.p.A. Model: CM/200 Serial number: 4142.031 200-054A Year of manufacture: 2017 Ncjdpfjydfg Nsx Akyor Machine type: Vacuum evaporator Condition: As new If you have any questions or need further information, please feel free to contact us.

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 1,300 mm, total width: 1,830 mm, total height: 2,735 mm, warranty duration: 12 months, overall weight: 950 kg, input voltage: 380 V, power: 35.5 kW (48.27 HP), pressure: 4 bar, temperature: 110 °C, Universal machine for heat treatment of all kind of meat products and fish. Heating can be realized by electricity, vapor or gas. Air circulation system provides processes steadiness and operates with two speeds 1450/2850 min-. Nsdpfx Akjwp I Axoyecr Smoking generator can be installed to the left or to the right. Valve pneumatic control. Chamber is controlled by ADITEC. Control unit measures and control chamber and sausage temperature, humidity, delta t, processing time. 100 programs can be saved by 10 steps. Following sensors are used: Pt 100. Software for visual control is offered as an option. Chamber is equipped with a system for automatic washing. Each module is equipped with its own heating and circulation which ensure processes steadiness and processing time reduction.

Condition: like new (used), Year of construction: 2017, operating hours: 610 h, functionality: fully functional, 1) 12-STATION RINSER IN 2 PHASES (WATER+AIR) for bottles with a maximum diameter of 115 mm. The rinsing process takes place only when bottles are present. The parts of the rinsing nozzles have no contact with the bottle neck. 2) 12-STATION ELECTROPNEUMATIC HIGH-PRESSURE FILLER for bottles with a maximum diameter of 115 mm The fill level can be electrically adjusted from the control panel without manual intervention from 25 to 100 mm below the bottle neck. Each filling valve is equipped with a sterilization bottle for cleaning and sterilizing the machine. The sterilization bottles are positioned manually. The filling valve operates with still and carbonated liquids from 0 to 8 bar. The fill level is precise 100 %. 3) MONOHEAD Crown Capper for D26 crown caps. Screw Cap can be installed for an additional fee Feeding and transfer between stations is performed by screw that guide and synchronize the bottles. Monoblock equipped with: - Protective enclosure compliant with CE standards, featuring tempered glass doors - Universal screw - Motor-adjustable side guides - Dummy bottles for sterilizing the rinsers - PLC and TOUCHSCREEN control panel - Electric height adjustment of all stations OPTIONS: - Washing of the bottles on exit using 7 nozzles, - Interior lighting with 4 LED strips - Machine equipped for remote assist. Ncsdsyukiwepfx Akysr Capacity*: 1,100 liters/hour Speed: 1,000 - 3,000 bottles/hour (INVERTER) * Actual capacity depends on several factors: A) Liquid B) Filling temperature C) Bottle pressure D) Bottle type With Filler we will give for free also the packing table

Condition: new, Year of construction: 2025, Metal roof snap lock machine SLP-1 auto with side punching option is the latest project of our company in the direction of equipment for metal roofing production. Snap lock machine SLP-1 auto can produce click-seam panels with fixation holes and punch off side parts of the panels, it makes possible to bend the edge of the panel and join it to the roof elements after. Our machine is equipped with an automation system and make production in a fully automatic mode. This process comes following way: operator of machine put end of metal roll to the pulling rollers of the machine, which moves it to the rolling part of the equipment. At the beginning of the rolling process, two pneumatic punching presses from each side of machine make side cuts of panels. Ncsdpfxjuzv Tzo Akyor After cutting, the rolling process goes to the next rolling rollers. They gradually form the roofing panel profile and cut out fixation holes with special cutting tool rollers. After rolling, special automatic shear at the end of machine cut off the panel into length with necessary sizes. As machine cuts side parts of panels at the beginning of production process, so it cuts only flat part of panel in the end of production. It makes panel quality better and there are no any deformations as with a profile cutting happens, when guillotine shear has to cut not only flat part but also the lock part of panel. Specifications: Dimensions (mm): rolling machine 3000x1400x900 guillotine shears 400x1120x1130 Weight (kg): rolling machine 643 guillotine shears: 110 Drive power: rolling machine: 1.5 kW, 220V (or 380V on request) guillotine shears: 1.1kW Maximum thickness of sheet metal (mm): 0.6-0.7mm Workpiece Width (mm): 250-700 Rolling speed (m/min): up to 10 Metal roof panel machine SLP-1 auto has an automation system so help to make minimum part of operator works - he just sets necessary number of panels and their length on the computer to produce, and the machine automatically rolls and cuts them. Therefore reducing the influence of the human factor, manufacturing errors are minimum and panels are all the same sizes and ready for further installation. SLP-1 auto click lock roll forming machine has easy width adjustment system, so to change machine from one panel width to another, the operator just needs to turn the adjustment wheel, so the readjustment takes a very short time for such operation. As additional options metal roof panel roll forming machine SLP-1 auto can have: Cutting knife to cut metal from coil at the end of the metal rolling process to reduce the amount of possible waste material; Ribbed panel rolls, to roll narrow or wide ribs in the center of the roofing snap lock panel; Microwave panel module- device to form small bends along the entire width of the roofing panel, making the appearance of the roof more interesting and eye-catching. Metal unwinder (can be floor-standing, manual console, automatic console).

Condition: used, Year of construction: 2019, functionality: fully functional, type of input current: AC, Vertical Packaging Line CAMPAGNOLO C95E-1 + CW14-2.5L (Snacks, Nuts, Cereals, Extruded Products) Complete vertical form-fill-seal packaging line designed for dosing and packing snacks, cereals, or extruded products. The system combines a multihead weigher, vertical bagging machine, and advanced marking and promotional accessories, ensuring high flexibility for different bag types and formats. COMPONENTS Vertical Packaging Machine – Model C95E-1 • For pillow bags and square-bottom bags • Compatible with mono-seal and bi-seal heat-sealable films • Output: up to 60 bags/min (square-bottom) or 80 bags/min (pillow) • Bag width: 50 – 245 mm  Length: up to 390 mm • PLC control with 7-inch color touchscreen (50 recipe memory slots) • Horizontal sealing driven by brushless motor; vertical sealing pneumatic Nsdpsqbryxofx Akyjcr • Encoder for variable bag length adjustment • Automatic film-splicing device and end-of-film alarm • CE-compliant safety protections (EU Machinery Directive 2006/42/EC) • Power consumption: approx. 3 kW  Air consumption: 300 L/min at 7 bar Included accessories • Round forming tube + additional forming set (round and rectangular terminals) • Square-bottom and gusset forming group • Euroslot hole punch unit • Photocell for centered print registration • Stainless-steel product contact parts (AISI 304) • Bag discharge chute and 350 × 2000 mm evacuation conveyor • Stainless-steel rotating table, Ø 1200 mm Multihead Weigher – Model CW14-2.5L • 14 weighing heads with 2.5-liter detachable buckets • Stepper-motor operation for precision and quiet running • Accuracy: ± 0.2 – 1.5 g (depending on product) • Speed: up to 75 weighings/min for 40 g packs • 10-inch color touchscreen with 99 recipe capacity • Full stainless-steel frame (AISI 304), IP65 protection rating • Auto-diagnostics and self-test functions • Power requirement: 1.1 kW, 220 V, 3-phase, 50 Hz Included accessories • Synchronization bucket with stepper motors • Buffer feeding belt • Support frame with ladder and safety rails • Product elevator (400 × 5500 mm) • Vibrating feeding hopper (170 L) Additional Integrated Options • Ribbon Printing and Marking • Programmable thermal-transfer ribbon coder, print area 32 × 50 mm, 300 dpi resolution, supplied with software for layout and logo management. • Promotional Ribbon Insertion Unit (Extra-Ribbon Group) • Automatic device for attaching promotional ribbons during bag formation. • Chapelet Group (Chain-of-Bags Formation), for forming continuous strips (chains) of connected bags. • Nitrogen Injection System for modified-atmosphere (MAP) packaging to extend shelf life of products.

Condition: excellent (used), ELOPAK SHIKOKU ASEPTIC FILLING LINE Model S-PS80HA YOM 2008 Working hours - 9,000 hours. Line capacity for 3 streams - 8100 pcs./h, for two 7100 pcs./h for one 6000 pcs./h Carton format: 500ml, 750ml, 1000ml The line includes: - Elopak filler S-PS80HA for Pure Pak classic packaging material - 3 units of PURE-PACK PLA-S30 cap applicators for Pure-Twist 2U cap - WA-Flex-30 packer - Conveyor system. Nodsxdbwiopfx Akyjcr - Conveyor lubrication station. - Spare parts a total of 4,000 dollars.

Condition: new, Year of construction: 2024, machine/vehicle number: AES80, The line serves for the preparation of shredded cabbage intended for fermentation and for salads. This line may include following machines and equipment: box pallet Njdjp E Eluepfx Akyecr tipper, unloading table, semi-automatic cabbage core drilling machine, cabbage shredding machine, conveyor for shredded cabbage , salt/spices dispenser, grated carrot dispenser (or other products like beets, grated paprika), additional functional conveyors for transportation.

Year of construction: 2007, condition: ready for operation (used), This HOMAG WEEKE industrial production line was manufactured in 2007. It features a comprehensive setup for high-volume panel processing and edge-banding, including automatic loading systems, a central roller conveyor, multiple edge-banding modules, and a portal manipulator for stacking. Ideal for streamlined wood production, ensuring efficient handling and precision. Consider the opportunity to buy this HOMAG WEEKE industrial production line. Contact us for more information about this machine. Nsdpfjx D Dq Sjx Akyecr Application Types Complete Production

Condition: not inspected (used), Yogurt and cheese filling machine Filling in 5 rows Ncsdpfx Aovr Hngokyer the machine is properly dismantled