Temperature test chamber 1540 liters

Vötsch VT³ 4150 -40°C bis +180°C

Condition: excellent (used), Vötsch Type: VT³ 4150 Vötsch temperature test chamber Air-cooled Rated voltage: 3/N/PE AC, 400 V ±10 %, 50 Hz Rated power: 11.5 kW Rated current: 22.0 A Rate of change: Cooling approx. 3.5 K/min. Rate of change: Heating approx. 4 K/min. Temperature test Temperature range -40°C to + 180°C Display plan External dimensions: W x D x H approx. 1390 x 2380 x 1995 mm Test chamber dimensions: W x D x H approx. 1100 x 1475 x 950 mm Weight approx. 1020 kg / 1540 liters Refrigerant R 404A The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) Rodpfx Asu Nh Rbjfpor (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 1985, condition: repair required (used), functionality: limited functionality, Schenk-Trebel Material Testing Machine Type RME 250 kN • Load frame and drive unit by Schenk Trebel, year of manufacture 1985, total height approx. 3.3 m. Traverse stroke approx. 2 m • Modernization around late 2003: Equipped with "testControl" control electronics from ZwickRoell • Retrofit in 2010: Universal extension measurement system MultiXtens from ZwickRoell, with swiveling device and two pairs of gauge arms (see photo), plus a new testControl module • Info: The testControl module operates with the current software "testXpert III" from ZwickRoell (one license for testXpert III version 1.51 is included in the price) • Temperature chamber (see photo) that can be moved into the test area of the machine, built 2006 by RS-Simulatoren Prüf- & Messtechnik, heatable up to approx. 200°C; coolable with liquid nitrogen down to approx. –40°C • Load cells: 250 kN and 50 kN (currently installed, see machine photo); additionally: 5 kN, 1 kN, and 500 N (see photo) Rodpfxjyhb Rle Afpor • 2 wedge specimen holders (see photo) Accessories (according to the photos or the MultiXtens system) can be sold separately upon request. Condition of the machine The machine has been in use for testing until early 2026. Utilized for testing: The 50 kN load cell and traverse displacement sensor (both sensors last calibrated on 06.05.2024 incl. standard inspection). A fault in the drive servo amplifier (component in the testControl module) has led to frequent connection interruptions to the software and drive stop until the hardware and software are restarted, starting in autumn 2025. The servo amplifier or the entire testControl module will need to be replaced (cost information available from the supplier). The 250 kN load cell was last calibrated on 11.02.2021 but has not been used for measurements since. The other load cells, the MultiXtens system, and the temperature chamber have not been used or calibrated in recent years. The two hydraulic clamping units visible in the machine on the photos will be removed and remain with the seller.

Condition: like new (used), Binder MK 720 E5 Climate Chamber from 2025 Ex-demo chamber, virtually as new. Fully tested, in perfect working order, ready for operation. PRODUCT DESCRIPTION The BINDER MK series chamber is designed for all thermal testing from -40°C to +180°C. For cyclic temperature testing, the MK chamber is a cost-effective alternative to expensive custom solutions. KEY FEATURES Temperature range: -40°C to +180°C APT.line™ preheating chamber technology Programmable anti-condensation protection for samples Heated observation window with internal LED lighting BINDER Multi Management Software APT-COM™ Basic Edition Diagnostic system with visual and acoustic alarms Intuitive touchscreen controller with time-segment programming and real-time programming Internal data logger, measurement values in open format readable via USB 2 access ports (80 mm) with silicone stoppers, left and right Independent, adjustable Class 2 temperature safety device (DIN 12880) with visual alarm 4 casters, two with brakes Rjdpsx I A I Hofx Afpsr PC interface: Ethernet Ramp function programmable Built-in line recorder Real-time clock Heated door 1 stainless steel wire shelf Stainless steel interior Halogen-free refrigerant R-452A Cooling provided by compressor unit