Valonkone debarking plantValon Kone
VK26M
Valonkone debarking plant
Valon Kone
VK26M
Condition
Used
Location
Malax 

Show images
Show map
Machine data
- Machine type:
- Valonkone debarking plant
- Manufacturer:
- Valon Kone
- Model:
- VK26M
- Condition:
- reconditioned (used)
Price & Location
- Location:
- Paxalvägen 39, 66140 Övermalax, Suomi

Call
Details about the offer
- Listing ID:
- A458-1914
- Update:
- 03.03.2024
Description
B., VK26M (1974 series) with motorized discharge table:
- Main engine
Lodpsfn Iu Iefx Akyjhf
- Feeding table ( driven )
- Output table
- Control cabinet
Including infeed and outfeed table, workshop inspected *
- debarking capacity: 10cm - 61cm diameter
- 4 main decision makers
- 4 cutting blades
- Rotor speed =235 rpm / min
- Rotor öppning=65cm
- 30 KW motor, speed 1500/ min
- Speed: 17-42m / min
- 3m or longer ( length of wood )
Dimension ( without infeed and outfeed table )
L= 9840mm
Entry table:
3540mm x 1000mm x 1900
Main engine VK26M :
2530mm x 2200mm x 2350
Outfeed table ( motorized table ) :
3170mm x 1000mm x 1300
RENOVATION:
Item 1 1 Content: Disassembly of machinery, washing, sandblasting, priming and painting, repair, assembly
Pos 2 1 Material of blade shafts on rotor new bearings and sealing (if necessary)
Item 3 5 5 Other material: Piece V-belt for rotor drive
Pos 4 1 Gear oil
Pos 5 1 Material: Abrasive + Colours
Pos 6 4 Valonkone piece peeling knife
Pos 7 4 Valonkone piece Pre-separator
Pos 8 1 Switch cabinet :
with 3-phase delta-start for 30 kw main motor
with 3-phase delta start for 11 kW geared motor
with start for 4 kw gear motor supply
with start for 4 kw gear motor output
Main Starter
Emergency STOP
The listing was translated automatically. Translation errors are possible.
- Main engine
Lodpsfn Iu Iefx Akyjhf
- Feeding table ( driven )
- Output table
- Control cabinet
Including infeed and outfeed table, workshop inspected *
- debarking capacity: 10cm - 61cm diameter
- 4 main decision makers
- 4 cutting blades
- Rotor speed =235 rpm / min
- Rotor öppning=65cm
- 30 KW motor, speed 1500/ min
- Speed: 17-42m / min
- 3m or longer ( length of wood )
Dimension ( without infeed and outfeed table )
L= 9840mm
Entry table:
3540mm x 1000mm x 1900
Main engine VK26M :
2530mm x 2200mm x 2350
Outfeed table ( motorized table ) :
3170mm x 1000mm x 1300
RENOVATION:
Item 1 1 Content: Disassembly of machinery, washing, sandblasting, priming and painting, repair, assembly
Pos 2 1 Material of blade shafts on rotor new bearings and sealing (if necessary)
Item 3 5 5 Other material: Piece V-belt for rotor drive
Pos 4 1 Gear oil
Pos 5 1 Material: Abrasive + Colours
Pos 6 4 Valonkone piece peeling knife
Pos 7 4 Valonkone piece Pre-separator
Pos 8 1 Switch cabinet :
with 3-phase delta-start for 30 kw main motor
with 3-phase delta start for 11 kW geared motor
with start for 4 kw gear motor supply
with start for 4 kw gear motor output
Main Starter
Emergency STOP
The listing was translated automatically. Translation errors are possible.
Seller
Note: Register for free or log in, to access all information.
Registered since: 2007
82 listings online
Send inquiry
Telephone & Fax
+49 176 6... show
These listings may also fit your interest.
Listing
Malax
7,604 km
Valonkone debarker
Valon KoneVK26M
Valon KoneVK26M
Listing
Rīga
8,145 km
Debarker/peeler Safo
SafoDNVA
SafoDNVA
Listing
Strenči
8,163 km
Debarker
Valon KoneVK26M
Valon KoneVK26M
Listing
Schwäbisch Gmünd
7,996 km
Debarking machine
NICHOLSONA 5 B
NICHOLSONA 5 B
Listing
Osła
8,153 km
Roundwood sorting plant
HOLTEC
HOLTEC
Listing
Kotka
7,991 km
Debarker
Valon KoneVK 820-C-3R
Valon KoneVK 820-C-3R
Listing
Gusselby
7,558 km
Guidework for debarker
Åseda
Åseda
Listing
Remscheid
7,683 km
Control unit
DietzFDR 132 M/4q Motor SN:3070557 mit FD 71/25q
DietzFDR 132 M/4q Motor SN:3070557 mit FD 71/25q
Listing
Gidle
8,376 km
Debarking
BARGARBG9A
BARGARBG9A
Your listing has been deleted successfully
An error has occurred































































































