Spraying machines Venjakob Ven Spray Comfort 2011

Venjakob

Condition: used, Year of construction: 2011, Colour: White Weight: 7.500 kg Price: On request - Year: 2011 - Documentation available: Yes - CE certificate present: No - Max. working width [mm]: 1300 - Number of spray booths [pcs]: 1 - Type of pump: Wagner - Options: Spray gun - └ Number of spray guns [pcs]: 4 - Transport weight [kg]: 7500kg Lredpfx Amozmvawstep - Transport packages [pcs.]: 7 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2022, operating hours: 326 h, functionality: fully functional, machine/vehicle number: A20221005, feed length X-axis: 5,500 mm, feed length Y-axis: 1,300 mm, feed length Z-axis: 100 mm, workpiece weight (max.): 500 kg, working width: 1,300 mm, No minimum price – guaranteed sale to the highest bidder! Auction of a fully automatic coating system consisting of the following components: VEN SPRAY SMART spraying system VEN MOVE TRANSFER VEN TRANS BELT (x3) VEN TRANS BELT with dust protection hood VEN MOVE TRANSFER with drying chamber Air supply unit HC12 The system was installed in 2022 and was in operation for approximately 1 year (326 operating hours in pistol drive). TECHNICAL DETAILS VEN SPRAY SMART spraying system (year of manufacture: 2019) Feed speed: 1.5-4.0 m/min Working speed: 2.0 m/min Working height: 920±20 mm Working width: 1,300 mm Min. workpiece size: 300 x 100 x 10 mm Max. workpiece size: 3,600 x 1,200 x 50 mm Coating material: water-based paints, solvent-based paints Spraying process: Air, Airmix, Airless 326 operating hours VEN MOVE TRANSFER 180° (year of manufacture: 2022) Ledjzlxilspfx Amterp Length: approx. 6000 mm Width: approx. 8,078 mm Speed: 3.2 m/min Max. load: 20 kg/m 766 operating hours 3x VEN TRANS BELT belt conveyor (year of manufacture: 2022) Length: approx. 5,635 mm Outer width: approx. 1,511 mm Working width: approx. 1,300 mm Conveyor speed: 3.0 m/min Max. load: 20 kg/m 766 operating hours VEN TRANS BELT with dust protection hood (year of manufacture: 2022) Length: approx. 3,800 mm Working width: approx. 1,300 mm Working height: 920±20 mm Conveyor speed: 3.0 m/min Max. load: 20 kg/m VEN MOVE TRANSFER with drying chamber (year of manufacture: 2022) Length: approx. 6,000 mm Width: approx. 8,078 mm Conveyor speed: 3.0 m/min Max. load: 20 kg/m Drying chamber manufacturer: Adolph & Co GmbH Min. exhaust air volume: 1,200 m³/h Operating hours (see image) Belt: 766 h Ventilation: 1,620 h Pistol drive: 326 h EQUIPMENT Fully automatic coating process Multi-layer coating programmable Automatic control of the entire coating process 6 freely programmable spray guns Suitable for water-based and solvent-based paints Suitable for automated coating processes in industrial applications

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, working width: 1,250 mm, pass-through height: 80 mm, UV System Venjakob - IST LIGNOCURE HL 140-4-N-DL, Year of Manufacture: 1999 (1990) POLYMERIZATION SYSTEM Lredpfx Amoyalc Netjp consisting of 2 UV dryers: Dryer 1 Overall length 2100 mm Overall width 2339 mm Workpiece dimensions min. 250x20 mm, max. 2500x1000 mm Workpiece height max. 60 mm 1 module with 2 elliptical reflectors (2 UV lamps) Electrode spacing of the IST lamps 140 mm Rotating reflectors Lamp rating 80 W/cm2 per lamp Beam length 1400 mm Lamp power 2 x 11.2 kW Air-cooled housing, capacity 1600 m³/h (motor 1.2 kW) Compressed air consumption 6 NL/h Belt conveyor Vanjakob, Year of Manufacture 1999, Type Novo 40 Length 2100 mm Working width 1300 mm Working height 880 - 920 mm Feed 0.75 kW Feed speed 4 – 20 m/min (Line 2 - 4 m/min) Dryer 2 Overall length 3340 mm Overall width 2339 mm Workpiece dimensions min. 250 x 20 mm, max. 2500 x 1000 mm Workpiece height max. 60 mm 1 module with 2 elliptical reflectors (2 UV lamps) Electrode spacing of the IST lamps 140 mm Rotating reflectors Lamp rating 80 W/cm2 per lamp Beam length 1400 mm Lamp power 2 x 11.2 kW Air-cooled housing, capacity 1600 m³/h (motor 1.2 kW) Compressed air consumption 6 NL/h Belt conveyor Vanjakob, Year of Manufacture 1999, Type Novo 40 Length 3340 mm Working width 1300 mm Working height 880 - 920 mm Feed 0.75 kW Feed speed 4 – 20 m/min (Line 2 - 4 m/min) Shared control cabinet for two drying tunnels 2000 x 16000 x 600 mm Operating voltage 400 V, AC, 50 Hz, 3 phases Total power of the complete UV system approx. 50 kW Operating side of the system on the left Weight of the complete system approx. 2500 kg (Subject to change and errors in technical data, as well as prior sale)

Condition: used, Year of construction: 2007, machine/vehicle number: A 07-01-003, Technical Specifications: - Manufacturer: Venjakob - Model: VEN SPRAY Comfort - Retrofit 2026 (Year of manufacture: 2007) - Working width: 1.300 mm - Control panel on the right - Price for a refurbished machine - As-is condition, not refurbished - Dual-gun drive system - Dry extraction - Exhaust air capacity 7.000 m³/h - Exhaust nozzle diameter 500 mm - Belt conveyor system - Feed speed approx. 3–7 m/min - With belt cleaning system - With paint recovery via V-belt system - Automatic part detection via light curtain - Spray gun control, touch screen - 1 paint circuit installed - 4 airless spray guns, Krautzberger KAA1300 - 1 high-pressure airless pump - Supply air filter cover - Suitable for water-based paints - Suitable for solvent-based paints - Control cabinet integrated into the machine. - Total power consumption ~ 23 kW Lrjdpfxjzia Nuo Amtop Measures: - Length: - Width: 3,690 mm - Height: 2,520 mm (2,360 + 440 mm) - Volts, Hz: 400 / 50 - Color: Light Gray 7035 + Black - Location: Not in stock, available from August 2026 - Voltage fluctuations: max. +/- 5% Some images are examples of a refurbished automatic spray machine of the same type._____Optionally, we can also provide you with a quote for installation and commissioning of the system, as well as employee training Upon request, we also offer regular maintenance and servicing of the machine. For further information, please feel free to contact us!

Condition: used, Year of construction: 1997, machine/vehicle number: HGS-Single A 97 03 005 Pos.6, Description for the diagram: 1 – Infeed table with cleaning unit (air blower) and crosswise brush for table width, collects residual dust from components 2 – Roller coating machine No. 1 3 – Roller coating machine No. 2 4,5 – UV lamp with conveyor – one lamp illuminating from above 6 – Quick Wood System RO1400 brushing machine 7 – Venjakob spray booth – 8 spray guns 8,9,10,11,12 – Drying tunnel with mechanical top air supply via nozzles, temperature and airflow can be regulated in 3 zones Lredpfx Asy Sn Srsmtsp 13,14 – UV lamp with conveyor – 2 lamps positioned at an angle to the workpiece, curing the edges as well 15 – Four-shaft brushing machine with individual height and speed adjustment for each shaft 16 – Intermediate sanding outfeed table 17 – Cleaning unit (air blower) for light surface dust removal 18 – Venjakob spray booth – single-circuit, but can be switched to a second by exchanging the entire spray gun rack (a spare is included) and switching the pump (two pumps included) 19 – Roller conveyor; lineup supported by photoelectric sensors for loading the dryer 20 – 14-shelf drying oven 22 – Outfeed table with two speed levels depending on the unloading speed required by the finishing line.

Year of construction: 1998, condition: ready for operation (used), An automatic Venjakob flat surface spray coating system is available. Coating material: water-based coating, working width: 1300mm, max. passage height: 70mm, working height range: 880mm-920mm, min. workpiece dimensions X/Y: 100mm/200mm, max. workpiece dimensions X/Y: 1200mm/3000mm, max. coating material pressure: 200bar, working speed: 3m/min. An on-site inspection is possible. Lrjdpozh Ng Hsfx Amtsp

Condition: used, Painting system consisting of: Pos.1 Venjakob belt conveyor - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 3,000 mm - Feed adjustable via handwheel ~ 2.5 – 7.5 m/min - Volt, Hz: 400 / 50 - Colour RAL 7035 Pos.2 Cefla dust extraction machine - Manufacturer: Sorbini - Type: VS/32-E - Year of manufacture: 1998 - Working width: 1,300 mm - Working height: 900 mm + - 20 mm - Operating side: right - Roller conveyor - Air blowing channel, above 2 pcs. - Air blowing channel, below 1 pc. - Dust remover brush - With ionisation bar from above - With ionisation bar from below - With own drive - With own control - Length ~ 910 mm - Width ~ 2,600 mm - Weight 1,260 kg - Extraction nozzle D 180 + 120 mm - Total connection 7.6 kW - Volt, Hz 400/ 50 Pos.3 Venjakob VEN SRAY Perfect automatic spraying machine - Manufacturer Venjakob - Type. VEN SPRAY PERFECT - Year of construction 2013 - Working width 1,300 mm - Working height 940 + - 20 mm - Operating side left - IR preheating, number of radiators 2 pcs. - Duo-design spray gun drive Lrodpfov I Akvex Amtop - Dry suction - Diameter of suction nozzle 600 mm - Exhaust air capacity 10,000 m³/h - Belt transport system - feed speed infinitely variable ~ 4-10 m/min - conveyor belt cleaning system - paint recovery via V-belt system - gun control, EPS-CNC CNC 7000 - colour management system for number of pumps 3+1 pcs. - number of installed airless spray guns 4 pcs. - Quick-change system for spray guns - Remote maintenance system - Dust cover on the outlet side of the machine - Exhaust air recirculation system - Exhaust air control of the suction ventilator - Machine suitable for water-based paints - Machine suitable for solvent-based paints - Length 5,509 mm - Width 4,500 mm + 2,400 mm - Height 3,380 mm + 510 mm - Total connection ~ 20 - 26 kW - Volt, Hz 400/50 - Colour RAL 7035 - Kremlin AVX AirMix spray guns - Small parts container - gun support arm system for quick removal of 4 AirMix spray guns from the spray booth, including quick couplings for pneumatics and material hoses. Pos.4 Venjakob belt conveyor - manufactured by Venjakob - working width 1,300 mm - length 2,000 mm - feed adjustable via handwheel ~ 2.5 – 7.5 m/min - Volt, Hz 400 / 50 - Colour RAL 7035 Pos.5 Cefla pallet dryer - Manufacturer Cefla - Type VN 2000/5500/190.5/30 - Year of construction 2003 - Working width 1,300 mm - Number of pallets 30 pcs. - Pallet length 5,600 mm - Usable pallet length 5,300 mm - Load capacity per pallet 300 kg - Max. part height ~ 110 mm - Clearance between pallets 120 mm - Dimension: centre of pallet to centre of pallet 3,658 mm - Max. part length ~ 5,200 mm - Number of controllable temperature zones 2 pcs. - Supply air flow rate 6,000 m³/h - Exhaust air flow rate 6,000 m³/h - Heat output max. 175 kW - Max. drying temperature ~ 55 - 60 degrees - With heat exchanger, hot water - Without hot water control valves - U-shaped flow direction - Inlet side on the right - Feed speed via frequency converter control ~ 2-20 m/min - Suitable for water-based paints - Suitable for solvent-based paints - Length 7,820 mm mm - Width 6,130 mm - Height 3,905 mm - Total connection ~ 23 kW - Volt, Hz 400 / 50 - Voltage fluctuations max. +/- 5 % - Without control valves and water pumps Pos.6 Cefla belt conveyor - Manufacturer Cefla - working width 1.300 mm - length 2.000 mm - feed adjustable via handwheel ~ 2.5 – 7.5 m/min - volts, Hz 400 / 50 - colour RAL 7035

Condition: used, Year of construction: 2017, machine/vehicle number: A1711012, Pos.1 VEN CLEAN Smart dedusting systemCompressed air dedusting for cleaning the workpieces to be painted from dust on profiled workpiece surfaces. Five rotating blowing stars are installed. These remove the dust from the surface. The loosened dust is extracted on both sides by suction shafts. on both sides. An external extraction system is required on site. Technical data: Roller transport length: 2,060 mm Roller pitch: 85 mm Working width: 1,300 mm Total width: 1,800 mm Drive power: 0.25 kW Exhaust air volume: 4,000 m³/h To be provided by the customer Compressed air consumption: 980 Nl/min. Ionisation as nozzle bar, not EX) with compressed air nozzles, Compressed air consumption 840LN/min. Pos. 2 Automatic spray gun VEN SPRAY Comfort- Manufacturer Venjakob - Type. VEN SPRAY Comfort CNC 7000 - Year of construction 2017 - Working height approx. 930mm+-20mm - Working width 1300 mm - Operating side left - Price for overhauled machine - Actual condition, machine not overhauled - Gun drive in duo version - Dry extraction system - Extraction nozzle diameter 500 mm - Exhaust air capacity 7,000 m³/h - Belt conveyor system - Infinitely variable feed speed ~ 2-6 m/min - With belt cleaning system with doctor blade in tungsten carbide design - Gun control, touch screen CNC7000 - Installed colour circles 1 pc. (optionally more possible) - Supply air filter cover - Suitable for water-based paints Ledpfx Ajvv Hryomtsrp - Suitable for solvent-based paints - Control cabinet, free-standing - Volt, Hz 400 / 50 - Colour RAL 7035 - Location, in stock Voltage fluctuations max. +/- 5 %

Year of construction: 2008, condition: used, machine/vehicle number: A0807010-0400, Technical data: - Manufacturer: Venjakob - Type: H (UV) - Working width: 1,300 mm - Length: 2,500 mm - Total width: 1,510 mm - Feed speed adjustable via frequency converter Ledpeyh Hu Tsfx Amtorp - Frequency converter not included in delivery - Conveyor belt suitable for ambient temperature up to approx. 120°C - Height: 900 ± 50 mm - Motor power: 0.75 kW - Motor ATEX-compliant - Belt control: pneumatic - Max. load: 70 kg/m - Colour: RAL 7035 light grey - Voltage fluctuations: +/-5% - Location: in stock

Year of construction: 2008, condition: used, machine/vehicle number: A0807010-1200, Technical specifications: - Manufacturer: Venjakob - Model: H - Working width: 1,300 mm - Length: 21,500 mm - Total width: 1,510 mm - Feed speed adjustable via frequency inverter - Frequency inverter not included in delivery - Height: 900 ± 50 mm Lodpfxoyh Hwze Amtsrp - Motor power: 0.81 kW - Motor ATEX-compliant - Belt control, pneumatic - Max. load: 70 kg/m - Colour: RAL 7035 light grey - Voltage fluctuations: ±5% - Location: in stock