Turbocharger electronic actuator tester

VTM Group ATP-1000

Condition: new, Year of construction: 2024, functionality: fully functional, VSM3.0DRO A-M Valve seat milling machine - new machine. Digital display valve seat milling machine. High precision valve seat milling machine specifically designed for multi-valve cylinder heads. Machining capacity from 16 mm to 90 mm. Variable speed from 100 to 1200 RPM. Max. cylinder head width: 500/19,7 mm/inch Max. cylinder head height: 450/17,7 mm/inch Tilt degree of cylinder head: +42°- -42° Max. tilt degree of spindle: 5° Travel: Bjdpfxovmpnlj Ahmoln -Cross: 930/37 mm/inch -Longitudinal: 40/1,6 mm/inch -Spindle: 200/8 mm/inch Spindle power: 1.8 kw Max. rotation speed of spindle: 0-1000 RPM Power supply: 380V/50Hz 3ph vagy 220V/60Hz 3ph Air compressor supply: 6/87 Bar/psi Noisy level: at 400 RPM 72dBA; at 1200 RPM 82dBA Weight: 1050/2310 kg/lb Dimension (L x W x H): 1040 mm x 1050 mm x 2170 mm

Year of construction: 2016, operating hours: 40 h, condition: like new (used), functionality: fully functional, 💎 Highlight: Only approximately 60,000 packs (approximately 40 operating hours) processed during the trial run! For sale is an absolutely like-new, high-end thermoforming packaging machine, a MULTIVAC R 245, in the extremely rare and hygienic medical version (Clean Design) (pp. 2, 15). The machine was purchased in 2016 for a medical project and was only used for a few test cycles in the sterile cleanroom. It is in absolute factory condition, both mechanically and visually (pp. 1-2). • Manufacturer: MULTIVAC Sepp Haggenmüller SE & Co. KG (p. 1) • Type: R 245 Medical / Clean Design (pp. 2, 15) • Year of manufacture: End of 2016 (pp. 1, 3) • Condition: Like new, unused (New Old Stock), stored in the cleanroom, dust-free • Operating hours: Only approximately 60,000 individual packs (equivalent to approximately 15 cycles) (p. 14) 📦 Technical data & dimensions • Total footprint (L x W x H): approximately 700 cm x 140 cm x 230 cm (including discharge conveyor) • Frame length, base machine: 5,500 mm (divisible frame for easier transport) (p. 6) • Machine nominal width (bottom film): 355 mm (worldwide standard, easily available) (pp. 6, 23) • Top film width: 342 mm (pp. 2, 23) • Infeed path: Comfortable, knee-free infeed path of 1,125 mm (p. 6) Blodpfjzwgxrox Ahmjn • Power supply: 400 V / 50 Hz / 3 phases (p. 8) • ATTENTION: no compressor included! 🛠️ Tool & format data (4-cavity contour tool) The installed original tool provides a highly precise, visually appealing contour packaging (ergonomic oval/drop shape), ideal for premium products (p. 14): • Format layout: 4 lanes side by side / 1 row (pp. 13-14) • Actual cavity inner dimensions per cavity (L x W): 152 mm x 64 mm (pp. 14, 16) • Package outer dimensions (L x W): 185 mm x 82 mm (pp. 14, 23) • Package depth: 19.5 mm (mold plate type 5, directly water-cooled) (pp. 14-15) • Infeed / discharge length: 185 mm (pp. 13-14) ✨ Premium features & expensive optional extras (included!) • Integrated printer: MULTIVAC MR293 HP/TT in-line direct printing system with a fully integrated MULTIVAC TTO 10 thermal transfer printer (300 dpi) for printing logos, batch numbers, and expiration dates directly in the control system (pp. 19-20). • Integrated chiller: Rittal air/water heat exchanger in a stainless steel housing for self-contained tool cooling in a closed circuit (no external water connection required) (pp. 6, 11). • Automated discharge conveyor: High-quality Intralox discharge conveyor (800 mm) with a blue Intralox chain and its own frequency inverter for synchronous package transfer (p. 12). • Scrap film management: Original MULTIVAC RSW 20 edge strip winder with integrated tear-off control and winding drive for clean film disposal (p. 12). • Gas flushing device (MAP): Gas injection bars installed on the tool side for packaging under modified atmosphere are available. • Control system: Modern 12.1" color touchscreen terminal with HMI 2.0 user interface and IPC 06 control (Windows Embedded) (pp. 9-10). • Documentation: Operating manual, spare parts catalog, electrical and pneumatic wiring diagrams in German included in the scope of delivery (pp. 19-20). 💰 Price € 39,900,- net, excluding VAT. • Shipping costs: Available upon request, throughout Europe • Delivery time: Immediately available • Inspection and collection: possible at any time by appointment (Changes and errors in the technical data, information and prices as well as prior sale reserved! See our general terms and conditions, all prices excl. VAT, ex wareh

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, Flowbench Machine FEATURES BENEFITS Compact design Integrated air supply Utilises your existing workshop air supply, 7 bar, clean dry air requirement It has the ability to measure digital and analogue wastegates on all vehicle models. With its 23.5-inch full touch screen and simple interface, it is very easy to use. Can be used without an internet connection Built-in database of more than 1900 references Flow adjustment possible for all types of turbochargers up to 200 kg/h Calibration test plates provided to easily verify machine accuracy All types of turbochargers can be easily connected with 6 adapters included as standard. G3 REA-Master (USB) Controller Built-in complete with 14 cables 12 volt and 4 cables for 24 volt Bedoq Trzfjpfx Ahmjln It displays and adjusts the current, voltage and position values of the Turbo VGT turbochargers. It can test all types of turbos with electronic, vacuum and vacuum sensor. Operates on 200 volts of electricity Calibration test plates supplied for easy verification of machine accuracy Supports PWM, FDCan, Can 2.0, Linbust, j1939 automatic communication protocols You can assign programmes to activators Quick-release mounting flange with adapters Machine weight 150kg Full CE Accreditation INCLUDING 1 x FX1 Flowbench Machine 1 x Touch Screen Monitor 14 x R.E.A. Cables 4 x 24 v Cables (OPTIONAL) 3 x C-Clamps 1 x Magnetic Stand

Condition: new, Year of construction: 2025, operating hours: 100 h, functionality: fully functional, overall weight: 20,000 kg, input voltage: 380 V, power: 50 kW (67.98 HP), warranty duration: 12 months, Equipment: CE marking, compressor, crane, documentation/manual, For sale is a new, fully equipped production line for PLA and PET bottle preforms and bottle blowing. The line was manufactured in August 2025 and delivered to Lithuania. The entire factory is 100% fully equipped, offering the buyer a very promising and profitable business opportunity. It enables the production of BIOBASED, biodegradable bottle packaging throughout the entire cycle, from preform to finished bottle. The line includes all molding and blowing molds, as well as EU standard bottle cap molds, robots, and all necessary accessories. Both PLA biopolymers, PBAT, PET, and rPET materials can be used. Line capacities: 1. Bottle preforms – 12,000,000 and more per year. 2. Bottle caps – 17,000,000 per year (28/1881 and 38/3S 1881). 3. Semi-automatic bottle blowing – 2 machines, 1,000,000 per month. Equipment: 1. Injection machine – 180 t (for preforms). 2. Injection machine – 150 t (for caps). 3. Coolers – 2 pcs. (for injection machines). 4. Full set of robots – 2 pcs. (for injection machines). 5. Injection molds – 6 pcs. (4 preform molds, 2 cap molds). All molds comply with standards (for milk, yogurt, beverages, juices, and other industries). The molds are fully equipped with hot runner systems. 16 gr / 38 3S, 20gr 38 3S, 36 gr 38 3S, 20 gr 1881 28 mm. Cap molds – 38 mm/3S and 28 mm 1881 (the cap remains on the neck). Bledpfxozv S Uvj Ahmon 6. Dryers – 2 pcs., 300 and 400 kg. 7. Blowing equipment – 38 mm/3S (full set). 8. Blowing equipment - 28 mm/1881 (full set). 9. Blow molds - 4 pcs. (38 mm: 250 ml, 500 ml, 1000 ml; 28 mm: 500 ml). 10. Refrigeration unit (for blowing line). 11. Compressor (for blowing and molding). 12. Air dryer (for blowing and molding). 13. Other equipment (conveyors, mixers). All production equipment is standardized and meets all EU and manufacturer requirements. This represents an excellent opportunity to start your own profitable and promising business. The asking price for the entire line is 160,000 EUR. We also have a twin-screw compounder for the production of biopolymer mixtures for use in the line. With a serious buyer, we can coordinate the entire package, including all laboratory food contact tests and all other solutions for production.

Condition: like new (used), Year of construction: 2023, operating hours: 100 h, functionality: fully functional, type of input current: three-phase, total length: 10,000 mm, total height: 2,000 mm, total width: 1,500 mm, input voltage: 230 V, overall weight: 3,000 kg, input current: 32 A, Machines are as new. We have also one pizzabox printer from Sunthink printing 600mm you can get including packing line. Bsdpfx Ahjz E I Sgjmsln