WEINIG planing heads

WEINIG

Condition: excellent (used), Year of construction: 2008, WEINIG HYDROMAT 2000 FEED MOTOR 5.5 KW FEEDRATE MAX 36 M/MIN SPECIAL WIDE FEEDING SYSTEM WITH AIR BED 1ST SPINDLE BOTTOM 11 KW, COUNTER BEARING 2ND SPINDLE RIGHT 7.5 KW 3RD SPINDLE LEFT 7.5 KW 4TH SPINDLE BOTTOM 7.5 KW, COUNTER BEARING 5TH SPINDLE TOP 15 KW, COUNTER BEARING WORKING WIDTH 250 MM PLANING HEIGHT 160 MM NUMBER OF SPINDLES 5 BOTTOM SPINDLES 2 RIGHT SPINDLES 1 SPINDLES LEFT 1 SPINDLES TOP 1 SPINDLE CONFIGURATION B-R-L-B-T SPINDLE ROTATION SPEED MAX 1/MIN 7.200 RPM SPINDLE DIAMETER 40 MM CONTINUOUSLY VARIABLE INVERTER DRIVE FEED FEED MOTOR 5,5 KW MAIN MOTOR POWER 15 KW SPINDLE(S) WITH COUNTERBEARING SEPERATE MOTOR PER SPINDLE MOTORIC ADJUSTMENT PROGRAMMABLE CONTROLLER INFEED TABLE LENGTH 700 MM TABLE ROLLERS DRIVEN LUBRICATION PUMP AUTOMATIC SHORT PIECE PACKAGE REDUCED ROLLER GAP PNEUMATIC TOP PRESSURE FIRST INFEED ROLLER CONTROLLED TYPE OF FEED ROLLER DRIVE CARDANIC MANUAL CENTRAL LUBRICATION CONTROL WEINIG POWERCOM PLUS CONFORMITY MARKING CE MARK Fedpfxjz N Szue Afujpn TOTAL CONNECTION 55 KW

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: 102940, WEINIG HYDROMAT H23 ELECTRONIC FEED FREQUENCY CONTROLLED. FEED MOTOR 22 KW 50MM SPINDLES WORKING WIDTH MAX. 230 MM WORKING HEIGHT MAX. 160 MM SHORT INFEED WITH 220MM TOP FEED ROLLERS BOTTOM 15KW 6,000 RPM, OUTBOARD BEARING, JOINTER READY RIGHT 11KW 6,000 RPM JOINTER READY Fedpoz N Sznsfx Afuspn LEFT 15KW 8,000 RPM JOINTER READY RIGHT 11KW 8,000 RPM JOINTER READY LEFT 15KW 8,000 RPM, JOINTER READY TOP 18.5KW 6,000 RPM OUTBOARD BEARING, JOINTER READY BOTTOM 11 KW 6,000 RPM OUTBOARD BEARING, JOINTER READY (STRAIGHT JOINTER) + OUTBOARD BEARING TOP 18.5KW 8,000 RPM OUTBOARD BEARING, JOINTER READY (STRAIGHT JOINTER) + OUTBOARD BEARING BOTTOM 22 KW 6,000 RPM OUTBOARD BEARING, JOINTER READY 12X TOP FEED ROLLERS (2X 220MM + 10X 140MM) 7X BOTTOM FEED ROLLERS POSSIBLE TO ADD ADDITIONAL STRAIGHT / PROFILE JOINTERS AS NEEDED AUTOMATIC LUBRICATION SYSTEM FULL DOCUMENTATION INCLUDED MACHINE LENGTH 5.2M

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, PRIBO PATERNOSTER STACKER OFFER INCLUDES 1. PROBO OUTFEED CONVEYOR WITH RIGHT ANGLE TRANSFER CONVEYOR. 2. PRIBO Q1020 PATERNOSTER STACKER. 4. 2X AUTOMATIC STICK MAGAZINES 1200MM. MINIMUM LENGTH APPROXIMATELY 1900MM. MAXIMUM LENGTH 4500MM. PACK WIDTH 1200MM PACK HEIGHT 1200MM MAX. CAPACITY 5 LAYERS PER MINUTE Fjdpfx Afjz N Szhoujpn SUITABLE FOR STACKING AFTER MOULDER, TRIMMERS, RESAW, DET, ETC.

Condition: ready for operation (used), Year of construction: 2015, Weinig Powermat 700 6x 40mm Spindles. CNC on spindles 3, 4 and 5. Width 20-230mm Height 10-160mm Memory system Automatic lubrication system for bedplates. No 1.  11kW - Bottom 7000rpm No 2. 7.5kW - Right 7000rpm No 3. 7.5kW - Left 7000rpm No 4. 15kW - Top 7000rpm No 5 . 11kW - Top 7000rpm No 6 . 11kW - Bottom 7000rpm Electronically variable feed. 40m/min Short infeed table. Marathon coating for machine bed plates. Fodpfx Aez N Sy Rsfuspn Manuals & hand tools.

Condition: excellent (used), Year of construction: 2010, WEINIG HYDROMAT 2000 WITH FLOATING VERTICAL SPINDLES OPPOSED Fodpfx Asz N Sy Dofuspn FEED MOTOR 22 KW FEEDRATE MAX 100 M/MIN 300MM WIDE MOULDER 1ST SPINDLE BOTTOM 30 KW WITH COUNTER BEARING 2ND SPINDLE TOP 30 KW WITH COUNTER BEARING 3RD SPINDLE LEFT 22 KW OPPOSED 4TH SPINDLE RIGHT 22 KW OPPOSED VERTICAL SPINDLES FLOATING VERTICAL SPINDLES OPPOSED SPINDLES 6,000RPM WORKING WIDTH 300 MM PLANING HEIGHT 160 MM NUMBER OF SPINDLES 4 BOTTOM SPINDLES 1 SPINDLE DIAMETER 50 MM CONTINUOUSLY VARIABLE INVERTER DRIVE FEED FEED MOTOR 22 KW MAIN MOTOR POWER 30 KW SPINDLE(S) WITH COUNTERBEARING SEPERATE MOTOR PER SPINDLE MOTORIC ADJUSTMENT PROGRAMMABLE CONTROLLER INFEED TABLE LENGTH 700 MM TABLE ROLLERS DRIVEN LUBRICATION PUMP AUTOMATIC SHORT INFEED WITH 220MM TOP FEED ROLLERS CONFORMITY MARKING CE MARK TOTAL CONNECTION 126 KW

Condition: excellent (used), Year of construction: 2009, LEADERMAC SPEEDMAC 923SP SPINDLES: 9 X 50MM X 6000 RPM BOTTOM (11 KW) - OUTBOARD BEARING RIGHT (11 KW) - LEFT (11 KW) - RIGHT (11 KW) - PROFILE JOINTER LEFT (11 KW) - PROFILE JOINTER TOP (15 KW) - OUTBOARD BEARING BOTTOM (22 KW), Fpedpfx Afsz N Syqoujn TOP (15 KW) - OUTBOARD BEARING + STRAIGHT JOINTER BOTTOM (15 KW) - OUTBOARD BEARING + STRAIGHT JOINTER WORKING WIDTH: 230 MM, HEIGHT: 160 MM. MAX FEED SPEED 60M/MIN (POSSIBLE TO INCREASE IF NEEDED) STRAIGHT JOINTERS. PROFILE JOINTERS. CNC POSITIONING ON SPINDLES 3, 5, 6, 8 CONNECTION: 380 V / / 50 HZ 400 AMPS. FULL DOCUMENTATION INCLUDED.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, feed rate X-axis: 12 m/min, feed rate Y-axis: 120 m/min, feed rate Z-axis: 120 m/min, working width: 230 mm, planing height: 120 mm, spindle diameter: 50 mm, planing width: 230 mm, working height: 120 mm, overall weight: 16,000 kg, power of feed motor: 37,000 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 3,000 rpm, height adjustment type: electric, planer shaft diameter: 50 mm, type of input current: three-phase, number of spindles: 10, power: 574 kW (780.42 HP), input frequency: 50 Hz, Equipment: cabin, motor brake, rotational speed infinitely variable, Weinig Powermat 2500 Fpsdpfx Afsx Svm Rjusn 10 Spindles, Working width: 230 mm, Working height: 120 mm, Spindle diameter: 50 mm, Feed: 37 kW / 12–120 m/min, Spindle configuration: 1- Bottom (22 kW) – with hydraulic clamping and fully automatic straight jointer 2- Right (11 kW) 3- Left (11 kW) 4- Top (37 kW) – with fully automatic straight jointer 5- Bottom (18.5 kW) – with hydraulic clamping and fully automatic straight jointer 6- Top (18.5 kW) – with hydraulic clamping and fully automatic straight jointer 7- Top (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm 8- Bottom (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm 9- Top (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm 10- Bottom (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm Short infeed table, 1.3 meters (4 rollers), with 2 powered rollers above the table and 2 powered rollers in the table (both table rollers can be lifted). Table height adjustment with electronic digital readout. Incl. 2 heavy-duty side pressure rollers, 140 mm diameter, pneumatically actuated. Base supports, height 320 mm, for a table height of 1190 mm. Marathon POWER Coating for machine table, fences, and guide rails (excluding infeed table and special table surfaces). Special coating to protect table plates, fences, and guide rails from excessive wear. Recommended for processing abrasive materials (e.g., tropical woods, MDF, chipboard, plastics, metals). Automatic lubricant pump for table resin removal. Powered rollers in the machine table, hardened. Heavy-duty steel pressure rollers from above, diameter 120 mm, located in the area of the right and left spindle.

Condition: used, Year of construction: 2017, functionality: fully functional, We offer this used Weinig Automatic Stacker, model Deck Stacker, manufactured in 2017. Video of the machine in operation is available. Manufacturer: Weinig Model: Automatic Stacker Year of manufacture: 2017 Condition: Used Category ID: 164 Type ID: 2293 Machine type: Deck Stacker Weinig Stacker – in perfect condition! Weinig is a global leader in the industry. This is not a budget machine; it is a premium-class machine that retains its value and operates reliably for years. For sale: a compact Weinig deck stacker in very good condition. It is entirely in its original paint, unmodified, and well-maintained. Fodpfx Afsz N H Tfouopn Key features: • Stacking length range: from 40 cm to 1.5 m • 4-5 layers per minute • Capability for herringbone stacking • Storage for spacers • Quick and easy adjustment of stacking dimensions • Additional milling wheel – can be mounted to push material off the line and onto a conveyor belt • The machine is in continuous working order Opportunity to view and inspect the machine in operation. If you have any questions or require additional information, please send a message or contact us by phone.

Condition: used, Weinig precision adjustment gauge for adjusting planer heads. Technical data: - Mandrel: 40 mm - Clamping length: 310 mm Fpsdpfjzrym Eex Afuon - Tool centre circles: 80–300 mm

Condition: new, Grinding wheels for WEINIG Rondamat. Price per piece. Fsdpsz N Dhmsfx Afuopn