Profile grinder

Weinig Rondamat 936

Condition: ready for operation (used), Year of construction: 2010, Functionality: fully functional, grinding length: 330 mm, type of input current: three-phase, grinding spindle speed: 4,600 rpm, coolant pump power: 210 W, grinding spindle motor power: 1,500 W, grinding wheel bore: 20 mm, Equipment: rotational speed infinitely variable, Weinig Rondamat 980 Year 2010 Technical data: Max. tool width: 330 mm With PowerLock: 322 mm Tool flight circle: 100 - 300 mm With PowerLock (optional): 100 - 250 mm Grinding wheel diameter: 125 - 200 mm Spindle speed frequency-controlled: 1500 - 4600 rpm Grinding spindle drive: 1.5 kW Dqw9Gh

Condition: good (used), Schneeberger Norma fully automatic tool sharpening machine Suitable for automatic grinding of solid profile milling cutters, finger jointer tooling and planer heads. Specification: • Maximum tool width (workable travel 400mm) 370 mm • Tool diameter planer heads (min-max knife heads) 120 - 300 mm • Grinding wheel speed 3000 / 6000 rpm Bfcfr3Gluo • Indexing possible 2,3,4,6,8,10,12 and 24 knife grinding. • Grinding wheel drive 1,9 kW • Clearance angle 10 - 35° • Coolant tank 40 L • Motor coolant pump 0,045 kW • Connection values, total 2 kW

Condition: like new (used), Grinding wheel for Weinig Rondamat or similar sharpening machines. Manufacturer No.: 930 062 002 grain size: D 151 Nlyhe8Bva diameter: 200 mm

Condition: good (used), Year of construction: 1985, overall weight: 850 kg, Manufacturer: WEINIG Type: Rondamat 912 Year of manufacture: 1985 Tool width: max. 260 mm Tool diameter: min./max. 80/280 mm Cutting edges: 2-36 Grinding spindle speed: 4600 rpm Grinding spindle drive: 1.1 kW (1.5 HP) Grinding wheel bore: 20 mm Bsiwgwyfbxc Coolant tank: approx. 50L Table feed: infinitely variable Grinding cycles per tool: 1-9 Radial clearance angle grinding, on the back of the blade: 15-35° Axial clearance angle grinding, on both sides: 0-15° Total electrical connected load: 2 kW (2.7 HP) Net weight: 850 kg Normal voltage: 400 V / 50 Hz

Condition: used, Year of construction: 1993, Semi-automatic head sharpening machine with Weinig Opticontrol sistem Bsg7Myt28Vc

Condition: excellent (used), Weinig Rondamat 950 head sharpener Grinding wheel diameter min/max: 150/225mm Width of grinding wheel min/max: 5/10mm Grinding wheel bore 60mm Tool diameter min/max: 100/230mm Maximum tool length 240mm Grinding spindle speed adjustable 1700/2000/2400/3000 r.p.m. Coolant tank approximately 50l Possibility of sharpening heads with profile knives DTR documentation B8Ptc8A28Q

Condition: ready for operation (used), Functionality: fully functional, grinding length: 350 mm, type of input current: three-phase, High-precision tool grinder Weinig Rondomat R960: - Production of profile knives from a blank according to a template. - Resharpening of straight and profile knives in the cutter head Grinding unit Mandrel: 40mm and 50mm Solid spindle carrier with precise guides for concentricity of less than 5/1000mm. Mechanical radial adjustment for different grinding wheel diameters. The grinding wheel is adapted to the shape of the styli by a pivoting dressing diamond. Grinding spindle with cone holder for fast and repeatable grinding wheel changes. Grinding wheel diameter min./max. 150 mm / 225 mm Grinding wheel width 2 / 10 mm Grinding wheel bore 60 mm Drive motor for grinding wheel 1.1 KW (1.5 HP) Spindle speed, 1700- 3000 rpm Grinding spindle speed infinitely variable frequency control Grinding spindle with hydraulic clamping Grinding clearance angle: - Back clearance angle 10 - 30 degrees - Lateral clearance angle 0 - 20 degrees Cyqihnoi7E - for straight cutterheads, the unit is swiveled by 60 degrees Cooling system Two flexible PVC hoses guide the coolant to the back of the knife and a coolant connection integrated into the knife support cools the knife from below. This prevents overheating of the blade and loss of temperature even when sanding large quantities of material. The coolant flow is controlled by a distributor with high-quality stainless steel ball valves. Coolant tank capacity approx. 50 liters Coolant pump motor 210 watts Grinding table Precision linear floating table for manual operation. Radial table clamping with fine adjustment for manual grinding of straight cutterheads Tool holder Sturdy tool holder with clamping bracket for precise fixing of the grinding arbor. Fastening of the axial constant system. Tool width max. 350 mm Tool cutting circle min./max. 100 mm / 300 mm Machine electric Operating voltage 400 Volt (range between 380 - 420 Volt), 50 cycles

Condition: good (used), Year of construction: 1995, WEINIG Rondamat R 934 Grinding machine for manual profile knife / regrind profile knife Sharpening straight knives in the planing head - using a template Tool flight circle min. 100 mm / max. 300 mm Tool width max. 240 mm Grinding wheel diameter min. 150 mm / max. 225 mm Grinding wheel bore 60 mm Grinding mandrel D = 50 mm Grinding wheel width - ceramic 5 mm Borazon 10mm Grinding wheel output 1,1 kW Spindle speed, infinitely variable 500 - 3.000 rpm. Clearance angle - radial (back) 10 - 30 degrees Axial (sideways) 0 - 20 degrees Axial for planer heads 60 degrees Coolant tank approx. 50 liters Electrical connection approx. 1,5 KW Operating voltage 380 V / 50 Hz Machine complete with accessories Cpmxfrxes0

Condition: like new (used), Grinding wheel for Weinig Rondamat or similar sharpening machines. Manufacturer No.: 920 072 005 Nlxjlipew grain size: D 126 diameter: 150 mm

Condition: like new (used), Year of construction: 1988, Good condition, I will add a few more stones. Wuxek3T

Condition: used, Grinding wheel diameter min./max.: 150 mm/225 mm Grinding wheel width: ceramic 5 mm, borazone 10 mm Grinding wheel bore: 60 mm Bcynxvetxd0 Tool circle min./max.: 100 mm/300 mm Tool width max.: 240 mm Clearance angle: radial 10°-30°, axial 0°-20°

Condition: good (used), Year of construction: 2001, Weinig Rondamat 960 Specification as follows Weinig Rondamat 960 High pecision knife grinder for sharpening straight knives and profiling using a template. Sharpening straight knives in the cutter block. Manual grinding machine for profile and straight grinding. Grinding wheel diameter min./max.: 150 mm / 225 mm Grinding wheel width: Ceramic 5 mm, Borazone 10 mm Grinding wheel bore: 60 mm Tooling circle min./max.: 100 mm / 300 mm Tool width max.: 240 mm Bgxhqhft0 Grinding wheel drive: 1,1 kW Spindle rpm: 1700 / 2000 / 2400 / 3000 U/min Free angle: Radial: (at the back) 10 - 30 degrees, Axial: 0 - 20 degrees For swivel heads up to 60 degrees Coolant tank approx. 50 litres Table feed 0 - 240 mm Electrical connection approx. 2 kW Pneumatic connection value 5 bar Operating voltage 380 V / 50 Hz Full documentation.

Condition: used, Grinding wheel diameter max.: 225 mm grinding wheel diameter max.: 225 mm Largest tool diameter: 300 mm Smallest tool diameter: 80 mm Tool width max.: 230 mm Sv9Sf tool width max.: 230 mm Weinig Rondamat 929 knife grinding machine for producing profile knives. Production from a straight blank or regrinding of used knives using a template. * Incl. new coolant pump.

Condition: good (used), Manual grinding machine for profile grinding. Manual straight knife grinder. Cnjnazahqa Grinding wheel diameter min./max.: 150 mm / 225 mm Grinding wheel width: Ceramic 5 mm, Borazone 10 mm Grinding wheel bore: 60 mm Tooling circle min./max.: 90 mm / 290 mm Tool width max.: 230 mm Grinding wheel drive: 1,1 kW Grinding spindle speed variable n = 1720, 2000, 2500, 2820 Side relief: 20 degrees right and left. Back relief: 10 - 30 degrees Coolant tank approx. 50 litres Electrical connection approx. 2 kW Operating voltage 380 V / 50 Hz

Condition: used, consisting of: Decorative film + aluminum backing plate + circuit board. new decorative film (manufactured in 2019), Cyhrfqd7K7 Control panel 23 001 0078, ID no. 10017781 / 912053002, br. original circuit board cleaned and checked, br. original aluminum support plate, cable on request.

Condition: good (used), Weing Rondamat 912 Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! Tool sharpening machine for fully-automatic straight knives. Specifications: • Max. working width: 260 mm (possible to offer wider version also if needed) • Min. tool diameter: 80 mm • Max. tool diameter: 280 mm • Automatic indexing: Z 1 to Z 36 • Adjustable clearance angle, radial: 15 – 35 degrees Cd8Xzig0Te • Adjustable clearance angle, axial: 0 - 15 degrees • Grinding wheel bore: 20 mm • Grinding wheel diameter: 125 mm/150 mm • Grinding wheel speed: 4600 rpm • Automatic grinding wheel adjustment • No. of grinding cycles: 01-09 • Max. grinding speed, step-lees adjustable to max. 530 mm/min • Total power: 2 kW • Grinding arbor diameter: 50 mm • Grinding wheel adaptor 1 • Coolant tank with pump Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!!

Condition: as good as new (ex-display), Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! CAN SHARPEN MAX 406MM DIAMETER CUTTERS !!! The G-716 Semi-automatic Cutterhead Grinder is used to sharpen 178mm to 406mm diameter eased edge, milled to pattern, and fingerjoint cutterheads. Worktable traversing is automatic and has adjustable stops. Cutterhead indexing is manual. Each knife is held against a positive stop while being ground !!! No Index Plate To Change No index plate to change when working with heads with different numbers of knives. The use of an index plate assumes that the knives and head separations are uniform throughout, which is often not the case. If the height of the knife is high or low, then the front face of the knife will vary from knife to knife making the task of grinding difficult. The one constant is the back face of the knife, therefore the use of an indexing stop against the back face will provide for accurate indexing regardless of the irregularities in the knives and head slots. Head Indexing and Wheel Feed: Manual Minimum / Maximum Diameter Cutterhead: 7″ Min./16″Max. 178mm Min./ 406mm Max. Worktable Feed: Air / Oil Travel (maximum): 12″ 305mm. Bi8Jucckex8 Adjustable Limits: Proximity Switch Speed: Fully Adjustable Index Method: Manual index after each knife is ground. Grinding Spindle: 1-1/2 HP Wash Down Duty TEFC Motor 3600 RPM, Dual ABEC 7 Precision Bearings, with Sealed Lubrication. 8″ (203mm)Diameter Grinding Wheel (9″ 229mm Diameter Max.) Coolant System: 15 Gallon Tank with Casters, Sediment Tray Full View Sight Glass, 5 GPM Pump (120VAC) Wash Down Hose Included Specifications Grinds 7″ to 16″ diameter eased edge, milled to pattern, and finger joint heads Automatic traversing worktable with adjustable travel limits Manual indexing of knives against a positive stop with grinding position pneumatic brake allowing precision indexing without the need of an index plate High precision 1-1/2 HP grinding spindle with sealed lubrication Recirculating adjustable flow flooded coolant system with wash down hose Fully enclosed grinding chamber with viewing windows and task light Grinding wheel feed allows unattended operation. New Proscale.

Condition: used, Sharpening machine for profile cutters and straight grinders. . Grinding interlocked in 2 axes. Very easy to operate. Width of the tool max: 360mm 2Jskj27 Maximum cutting circle 350mm profile 300mm straight Minimum cutting circle 70mm Main motor power kW: 1.5 at 3000 rpm at 50 Hz. Wet grinding: Yes

Condition: excellent (used), Stehle S820 (automatic straight knife grinder). Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! Bi8Jvxw7Ziq Specification: • Maximum tool width 330 mm • Tool diameter planer heads (min-max knife heads) 120 - 230 mm • Grinding wheel speed 2850 / 5750 rpm • Possible to grind from 2 to 12 knives per head with index plate • Index plates included for 4,6,8,10 and 12 knife grinding. • Grinding wheel drive 1,3 kW • Clearance angle 10 - 35° • Coolant tank 125 L • Motor coolant pump 0,28 kW • Connection values, total 2 kW Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!!

Condition: used, Year of construction: 2016, machine/vehicle number: 6904.10, Optimizing cross-cut saw Weinig OptiCut200 Classic - Manufacturer Weinig - Type OptiCut 200 Classic - Year of construction 2016 Technical data: - Entrance lengths min/max. 400 - 6.300 mm - Entrance widths min/max. 30 - 260mm - Entrance strengths min/max. 12 - 80mm - Nominal cross section for saw blade Ø 500 mm: Max. 260 x 12 mm Max. 200 x 60 mm Max. 160 x 80 mm - Fixed length according to saw automatic waste chute min. 140 mm - Type of wood: soft and hardwood - Inlet and marking station powered with Opojd7Kvs9 Side support tables - Conveyor belt to the cross-cut saw - Length measurement with fluorescence camera - With integrated waste chute - Outlet conveyor belt / sorting station with drive unit - Outlet conveyor belt length 7.500 mm - 4 ejectors with anti-jamming protection for installation on the exit conveyor belt - OptiCom Assist control - Air connection R1/2” - Air consumption approx. 1.200 Nl/min - Operating pressure approx. 8 bar. - Suction speed min. 30 m/sec. Suppression at 30 m/sec. 2.800 Pa - Extraction volume approx. 1.800 m3/h - Total power approx. 16 kW - Operating voltage 400 V / 50 Hz - Color RAL 7035 - Voltage fluctuations max. +/- 5%

Condition: used, Year of construction: 2007, Number of tenoning spindles: 2 Moulding spindles right mm: 3 Length of profiling spindle: 320 mm Scantling length min: 300 mm Scantling length max: 2.600 mm Feedrate max: 18 m/min Continuously variable feed: Yes Cross cut saw: Yes Angular system: Yes CNC machining centre: Yes Horizontal drills in X: Yes Horizontal drills in Y: Yes Lock case milling aggregate: Yes Mitre difference measure adjustment: Yes Spindles programmable: Yes Drilling: Yes Atelier window: Yes Shark cutter: Yes Tool set for window production: IV 68, IV 78, Holz-Alu Completely chained: Yes Workpiece thickness max: 100 mm Spindle diameter: 50 mm Cutting circle of profiling tools: 240 mm Drbfjh Cutting circle of tenoning tools mm: 320 Space requirement Length: 19,5 m Space requirement Width: 9,55 m

Condition: used, Number of spindles 5 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed speed 2-12 m/min. Dimensions (L/W/H) 4400x1400x2300 mm 1 WEINIG planer and moulder VARIOMAT ----- Machine completely checked and cleaned Working width: 20 - 230 mm Working height: 8 - 120 mm 1. spindle horizontally at the bottom ----- Motor with brake: 7.5 kW Diameter 40 mm Speed ??6000 rpm Tool flight circle 125 - 145 mm Axially adjustable range 5 mm Folding device including folding cutter 2. spindle vertically on the right ----- Motor with brake: 7.5 kW Diameter 40 mm Speed ??6000 rpm Tool flight circle 93-232 mm Minimum tool diameter on stop plane: 93 mm Maximum tool diameter behind stop plane: 180 mm Maximum moulding depth 45 mm Axially adjustable range 30 mm Insert segment, including additional stop lip 125 mm Insert segment, including additional stop lip 150 mm 3rd spindle vertical left ----- Common motor with 1st right spindle Diameter 40 mm Common speed with right spindle Tool flight circle 93-232 mm Maximum throat depth 45 mm Minimum throat depth with tool flight circle 200 mm: 20 mm Axially adjustable travel under table 30 mm Insert segment 125 mm Insert segment 150 mm 4th spindle horizontal above Dqxkj2 ----- Motor with brake: 7.5 kW Diameter 40 mm Speed ??6000 rpm Tool flight circle 125-200 mm Maximum throat depth 30 mm Minimum throat depth with tool flight circle up to 200 mm: 20 mm Axially adjustable travel 30 mm 5th spindle horizontally below ----- Motor with brake: 5.5 kW Diameter 40 mm Speed ??6000 rpm Tool flight circle 125-200 mm Maximum throat depth 15 mm Axially adjustable range 10 mm Table plates for wood insert on lower spindle Additional discharge plate above the lower spindle for wood insert Feed system ----- Frequency-controlled feed 1.1 kW, infinitely variable 2-12 m/min Double pendulum opposite left spindle Adjustment range of feed rollers opposite left spindle, axial 35 mm Durofer spray tooth rollers Pneumatic pressure for feed rollers, including water separator One feed roller in front of lower spindle, including separate pressure control and pneumatically "high-low" controlled More Features: ----- Machine prepared for subsequent installation of the multifunctional table and PowerLock tool holder 2.5 m planing table Memory function control Width and height controlled (spindle 3 and 4 radial axis controlled) ----- For a detailed description, see the attached PDF. ----- INCLUDED: ----- 5 used planing heads with reversible knives (replacement knives as available): for spindle 1 bottom: planing head 240 mm long, diameter 120 mm + pre-jointing cutter for spindle 2 right: planing head 130 mm long, diameter 120 mm for spindle 3 left: planing head 130 mm long, diameter 120 mm for spindle 4 top: planing head 240 mm long, diameter 120 mm for spindle 5 top: planing head 240 mm long, diameter 120 mm ----- Price of the above machine on request! ----- (...

Condition: used, Year of construction: 2016, Working dimension X: 4.500 mm Working dimension Y: 260 mm Working dimension Z: 150 mm Number of milling spindles: 1 Main motor power: 30 kW Rotation speed max: 18.000 rpm Wu90I0R3S Torque support: Yes 4th axis: C-axis Tool clamping system: HSK-F63 Tool changer positions: 30 Disc tool changer: Yes Bauform Standportalmaschine: Yes Machine table: Special execution WEINIG PowerGrip: Yes Self-adjusting machine table: Yes Special workpiece clamping system: For windows Feeding: Transversal buffer Outfeed: Transversal buffer Safety device: enclosed fence, enclosed cabin Videocamera: Yes Control cabinet cooling: Yes Plausibility check: Yes Workpiece length measurement: Yes Workpiece width measuring: Yes Automatic central lubrication: Yes Control: PC control, SIEMENS SINUMERIK 840 D SL, WEINIG NEXUS TOUCHSCREEN Conformity marking: CE mark Total connection: 32 kW Space requirement Length: 14,2 m Space requirement Width: 5,5 m

Condition: used, Number of spindles 6 St. Working width 230 mm Working height 160 mm Length of the planing table 1050 mm Feed motor 7 kW Feed speed 6-40 m/min. Weinig Powermat 1200 ----- with infeed automation Weinig wheel magazine EM 100 and linked with outfeed automation Weinig High-Mech A 1 The machine will be completely checked in our warehouse before delivery! Detailed description: ----- 1. Weinig planer and moulder Powermat 1200 ----- Technical data: ----- Working width 20 - 230 mm (with tool flight circle 93 - 163 mm) Working height 10 - 160 mm (with tool flight circle 93 - 163 mm) 1. Spindle ----- First lower horizontal spindle Motor with brake 7.5 KW Spindle diameter 50 mm Speed ??8,000 rpm Tool flight circle 125 - 180 mm In conjunction with PowerLock 93 - 180 mm Tool flight circle rebate cutter 130-160 mm Axially adjustable range 17 mm Folding device MarathonCoating in front of 1st lower tool holder 2nd spindle ----- First right vertical spindle Motor with brake 7.5 KW Spindle diameter 50 mm Speed ??8,000 rpm Tool flight circle 93 - 200 mm Maximum throat depth 35 mm Axial adjustment range 80 mm Radial adjustment range Min. tool diameter on stop plane 93 mm Max. tool diameter behind stop plane 200 mm 3rd spindle ----- First left vertical spindle Motor with brake 7.5 KW Spindle diameter 50 mm Speed ??8,000 rpm Tool flight circle 93 - 200 mm Tool flight circle for straight cutter heads max. 163 mm Maximum throat depth 35 mm Axially adjustable travel 80 mm Pressure shoe in front of left tool holder, including 2 side pressure rollers, spring-loaded Styx80Krc 4th spindle ----- First upper horizontal spindle Motor with brake 7.5 KW Spindle diameter 50 mm Speed ??8,000 rpm Tool flight circle 93 - 200 mm Tool flight circle for straight cutter heads max. 163 mm Maximum throat depth 35 mm Axially adjustable travel 40 mm Split pressure shoe in front of upper tool holder on tool flight circle adjustable and swinging away from the tool, spring-loaded. Upper spindle prepared for later installation of the cassette system 5th spindle ----- Second upper horizontal spindle Motor with brake 7.5 KW Spindle diameter 50 mm Speed ??8,000 rpm Tool flight circle 93 - 200 mm Tool flight circle for straight cutter heads max. 163 mm Maximum throat depth 35 mm Axially adjustable travel 40 mm Split pressure shoe in front of upper tool holder on tool flight circle adjustable and swinging away from the tool, spring-loaded. Upper spindle prepared for later installation of the cassette system 6th spindle ----- Second lower horizontal spindle Motor with brake 7.5 KW Spindle diameter 50 mm Speed ??8,000 rpm Tool flight circle 93 - 225 mm Maximum throat depth 15 mm Axially adjustable travel 40 mm Radial adjustable travel Min. tool diameter to table level 93 mm Max. tool diameter 6 mm below table level 225 mm All spindles with high concentricity. Lubrication points for the axial tool holder movement. Feed system ----- Electronic feed, infinitely variable with brake 6-4...

Condition: used, Year of construction: 2003, Working width: 230 mm Planing height: 120 mm Number of spindles: 5 Bottom spindles: 2 Right spindles: 1 Spindles left: 1 Spindles top: 1 Spindle configuration: b-r-l-t-b Spindle rotation speed max 1/min: 6.000 rpm Spindle diameter: 40 mm Feedrate max: 24 m/min Continuously variable feed: Yes Mobile spindle: Yes Bpmvvb2Arg Motoric adjustment: Planing height Lubrication pump: manually Pneumatic top pressure: Yes First infeed roller controlled: Yes Type of feed roller drive: Cardanic Conformity marking: CE mark Weight: 2.300 kg Space requirement Length: 3,9 m Space requirement Width: 1,8 m Space requirement Height: 1,85 m