Turn-mill center

WILLEMIN MACODEL W 408B

Condition: excellent (used), Year of construction: 2011, TECHNICAL DATA Linear Axes (Slides X, Y, Z) Travel distances: Axis X: 250 mm Axis Y: 200 mm Axis Z: 300 mm Rapid traverse (X, Y, Z): 30 m/min Feed force (X, Y, Z): 3700 N Resolution (X, Y, Z): 0.0001 mm Rotary Motion of Motor Spindle – Axis B Rotary travel range: -15° to +100° Rotary travel range (with tailstock): Tailstock in position: -20° to +45° Tailstock removed: -20° to +90° Maximum speed: 20 rpm Drive torque: 750 Nm Hydraulic clamping: 50 bar Holding torque: 300 Nm Resolution: 0.0001 mm Milling Motor Spindle HSK E40 Nlodpfx Aowv Hnmjgfjf Power at 100% duty cycle: 10 kW Power at 25% duty cycle: 15 kW Nominal torque (100%): 8 Nm Nominal torque (25%): 12 Nm Speed range: 50 – 30,000 rpm Axis A (Bar capacity Ø 40 mm) Spindle type: A4 Max. bar diameter: 40 mm Max. speed: 35 rpm Drive torque (nominal): 112 Nm Drive torque (max.): 238 Nm Resolution: 0.0001° Axis clamping (Axis A): Pressure: 70 bar Holding torque: 130 Nm Tool Changer Number of tool discs: 2 Positions per disc: 24 Max. tool weight: 1 kg Rotational speed: 60 rpm Max. tool diameter (adjacent positions occupied): 50 mm Max. tool diameter (adjacent positions free): 63 mm Max. tool length (from spindle nose): 95 mm Coulisse de Reprise Travel distance: 80 mm Feed force: 1700 N Tilting moment: 90 Nm Resolution: 0.0001° Hydraulic pressure for tilting motion: 100 bar Workpiece Manipulator Pneumatic vertical slide gate: Ø 25 mm Stroke: 710 mm Linear travel per motor revolution: 70.4 mm/rev Max. transfer speed: 60 m/min Max. workpiece weight: 5 kg Max. manipulator stroke: 1120 mm (2×560 mm) Max. vertical travel: 150 mm Part pick-up Ø/length: Ø 32 mm / 100 mm Part ejection Ø/length: Ø 32 mm / 100 mm Accuracy: +/- 0.05 mm Grip force: 45 N (at 6 bar) Max. gripper opening: 14 mm (2×7 mm) Pneumatic Equipment Operating pressure: 6 bar Hydraulic System Operating pressure: 95 – 105 bar Coolant System Coolant tank volume: 80 liters Chip pan volume: 30 liters Kinematic viscosity in operation: 10 – 15 cSt SCOPE OF DELIVERY Includes (not limited to): Willemin Macodel W 408 B machining center Extraction unit Fire suppression system Probe Coolant system Oil chiller Data backup Complete operator documentation Exact scope of delivery as per photo gallery No guarantee is given for the correctness, completeness, or currentness of the information provided.

Condition: good (used), Year of construction: 2010, Machining Centre Sugino Xion-II-5AX-CE Manufacturer: Sugino Machine Limited Japan Model: Xion II 5AX CE Year of manufacture: 2010 Number of axes: 5 Travel distance X axis: 300 mm Travel distance Y axis: 300 mm Travel distance Z axis: 200 mm A axis swiveling range: -90° to +90° C axis rotation: 360° Maximum tool diameter: 40 mm Maximum tool weight: 15 kg Spindle speed: 40,000 rpm Tool holder: HSK-E32 Positioning accuracy X, Y, and Z axes: 0.002 mm Repeatability X, Y, and Z axes: ±0.001 mm Nledpfxox Hqwge Agfof Machine weight: 2,800 kg No guarantee is given for the correctness, completeness, or currentness of the information provided.

Condition: used, WILLEMIN MACODEL W 408 B is a 5‑axis machining center engineered for precision, high accuracy and reliability. Capacity: X250 Y200 Z300 mm; A360° B -10/+100°; res. 0.001. Spindle up to 30,000 rpm; 24 tools HSK E40; Ø50×L93 mm (1 kg); rapid traverse 30 m/min; 3x400V 50Hz, 18 kVA. Accessories: collets F‑35, BLUM Nano tool‑break control, spindle cooling, coolant system, automatic central lubrication, fire extinguishing system. Achieves tight tolerances; ideal for automotive, watchmaking, aerospace, medical. Nlsdpfxoyxp Dco Agfof

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Siemens control system, 12-station turret (VDI16), collet chuck, jaw chuck, steady rest, driven tools, Nledpfxozkk Hys Agfof accessories

Condition: ready for operation (used), Year of construction: 2019, operating hours: 1,612 h, controller manufacturer: SIEMENS, number of axes: 3, This 3-axis EMCO MILL E350 was manufactured in 2019, featuring advanced Siemens control for precise operations. Ideal for complex milling tasks, this vertical machining center ensures reliable performance. Consider the opportunity to buy this EMCO MILL E350 vertical machining center. Contact us for more information. Nlodpfx Aeyfu Uxsgfof

Condition: like new (used), Year of construction: 2016, 1 used vertical machining center Manufacturer: EMCO Type: Concept Mill 260 Year of manufacture: 2016 Spindle operating hours: approx. 1000, from a vocational training center Travel range in X/Y/Z: 350/250/300 mm Distance from spindle nose to table: 120 - 420 mm Rapid traverse rate X/Y/Z: 24 m/min Working feed rate X/Y/Z: 0-10 m/min Max. feed force in X/Y/Z: 3000 N Clamping area: 520 x 300 mm Max. table load: 100 kg Nlsdpfxezq R Iqs Agfof Number of tool positions: 20 Max. tool diameter: 80 mm Max. speed: 10000 rpm Max. torque: 34 Nm Dimensions (L x W x H): 1600 x 1700 x 2200 mm Machine weight: 1970 kg

Year of construction: 2007, condition: ready for operation (used), A CNC short-bed turning machine Emco is available. Travel X/Z: 100mm/300mm, max. turning diameter: 85mm, max. swing diameter: 250mm, max. turning length: 255mm, center distance: 405mm, max. bar capacity: 25.5mm, spindle bore: 30mm, spindle speed: 6300rpm, tool stations: 12, tool interface: VDI16, rapid traverse: 15m/min. Machine dimensions X/Y/Z: approx. 1700mm/1300mm/1850mm, weight: approx. 1400kg, control: Siemens Sinumerik 810D, operating hours: approx. 27000h, spindle hours: approx. 11000h. Including bar feeder. The spindle was replaced in 2021 at approx. 25000 operating hours. Documentation available. An on-site inspection is possible. Nledpozhnt Sjfx Agfef

Condition: ready for operation (used), Year of manufacture 2006 / Complete and ready for delivery / Available immediately / Location: Salzburg. Nsdpfx Ajza Ugkegfolf

Condition: good (used), Year of construction: 2017, MAXXMill 350 [ Technical Data ] Travel and Tolerances Travel X-axis: 350 mm Travel Y-axis: 250 mm Travel Z-axis: 300 mm Distance spindle nose – table surface (min. - max.): 70 / 370 mm Swivel range B-axis: +/-100° Rotary range C-axis (rotary table): 0 – 360° Feed Rapid traverse X-Y-Z axis: 30 m/min Max. rotational speed B-axis: 20 rpm Max. rotational speed C-axis: 25 rpm Max. motor feed force X-axis: 3000 N Max. motor feed force Y-axis: 3000 N Max. motor feed force Z-axis: 3000 N Max. acceleration X-Y-Z-axis: 4 / 3 / 3 m/s² Swiveling Rotary Table Table diameter: 400 mm Table height from floor: 860 mm Number of T-slots: 5 Slot spacing: 75 mm Slot width: 14 mm Max. permissible workpiece weight (evenly distributed): 50 kg Main Spindle (mechanical spindle) Spindle speed: 50 – 12,000 rpm Max. torque: 33 Nm (S6) Max. power: 7 kW (S6) Tool taper: ISO 30 DIN 69871 Pull stud: DIN 69872A Direct drive with coupling Tool Magazine Number of tool stations: 20 (30, 50) ISO 30; 30 (50) HSK-A40 Tool change concept: changing arm Tool management: random Tool change time (tool-to-tool): 2 sec Max. tool diameter: 63 mm Max. tool diameter (without adjacent tool): 100 mm Max. tool length: 200 mm Max. tool weight: 5 kg Max. drum load weight: 60 / 70 / 100 kg Coolant System Coolant tank capacity: 120 l Standard coolant pressure: 2 bar Max. delivery rate at 2 bar: 40 l/min Nodpfxsx H T Eyj Agfjlf Pneumatics Min. supply pressure: 6 bar Min. supply volume: 200 Nl/min Lubrication System Spindle: grease Roller guide: oil / central lubrication Ballscrew: oil / central lubrication Dimensions Overall height: 2300 mm Installation area (W x D): 1630 x 2300 mm Weight: 3800 kg

Condition: ready for operation (used), Year of construction: 2014, operating hours: 3,955 h, travel distance X-axis: 100 mm, travel distance Z-axis: 300 mm, spindle motor power: 3,700 W, total width: 1,700 mm, overall weight: 1,400 kg, controller manufacturer: SIEMENS, controller model: Sinumerik 828D, product length (max.): 1,270 mm, number of axes: 2, Horizontal turning machine manufactured in 2014. This EMCO E25 features a maximum turning diameter of 85 mm and a maximum turning length of 225 mm. It includes a VDI 16 disk turret with 12 tool stations and a rapid traverse speed of 15 m/min in the X-axis. If you are looking to get high-quality turning capabilities, consider the EMCO E25 machine we have for sale. Contact us for further details. • Spindle motor power: 3.7 kW (5.5 kW at 40% duty cycle) Nlodpfx Agszk Ep Nofof • Spindle speed range: 60 - 6300 rpm (infinitely variable) • Feed Force: 3000 N / 3500 N • Rapid Traverse: 15 m/min / 24 m/min • Number of tool slots: 12 • Main electronic connection: 400 V (3/PE) • Power consumption: 6 kVA • Chip conveyor: Included • Swing over bed: 250 mm • Max. Turning Diameter: 85 mm • Max. Turning Length: 225 mm • Max. Bar Capacity: 25.5 mm • Distance between centers: 405 mm • Spindle Connection: Ø 70 h5 • Max. Chuck Size: Ø 100 mm • Max. Torque: 35 Nm • Turret Type: VDI 16 disk turret with directional logic • Tool Shank Cross-section: 12 x 12 mm • Coolant tank capacity: 140 liters • Sound pressure level: 78 dB(A) Optional We can also offer a bar loader from another customer for an extra amount. Technical Specification Through-spindle Coolant No Counter Spindle No Driven Tools No