Universal Milling Machine

WMW "FRITZ HECKERT" FU 315 V/2

Condition: good (used), Year of construction: 1954, Ref. -No.: 10576 Manufacturer: VDF WOHLENBERG Type: VDF Year of construction: 1954 Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Germany Machine-No.: 27XXX Turning Length: 4000 mm Spindle Diameter: Ø 80 mm Faceplate Speeds I: 355 RPM Turning diameter over cross slide: Ø 1000 mm Max. Turning diameter: Ø 1250 mm Iedpoxmd U Asfx Apcsia

Condition: excellent (used), Horizontal Gear Hobbing Machine Manufacturer: WMW HECKERT Model: ZFWVG 250x2000 VEB Fritz Heckert ZFWVG 250×2000 Max. workpiece length: 2,000 mm Isdjyr S Upopfx Apcjia Max. workpiece diameter: 250 mm Accessories: second milling head, hobs for various modules, steadies, clamping devices, etc.

Condition: used, max. workpiece diameter 500 mm threading length 800 mm Ijdoyy A Spepfx Apcsia max. module 4 (8) min. module 1 clamping length max. 850 mm weight of the machine ca. 3,2 t dimensions of the machine ca. 3,1 x 1,1 x 1,6 m

Condition: excellent (used), functionality: fully functional, WMW Germany GFL-400 x 1000 mm Thread Milling Machine Manufacturer: WMW (Germany) Model: GFL-400 Centre Height: 205 mm Maximum Workpiece Length: 1000 mm Maximum Workpiece Diameter over Cross-Slide: 200 mm Maximum Swing Diameter over Bed: 400 mm Cutter Speeds: 55 rpm to 250 rpm Maximum Cutter Diameter: 100 mm Ijdpjytirnofx Apcjia Spindle Bore: 80 mm - Suitable for thread milling, worm milling, and spline milling. - Also capable of gear hobbing and spline hobbing. - Supplied complete with change gears, index plates, arbors, and additional accessories. - The machine is in excellent working condition.

Condition: excellent (used), functionality: fully functional, Gear hobbing machine ZFWZ 800x10/1 Year of manufacture: 1983 The machine is dismantled and in good condition. Specification: Max. workpiece diameter: 800 mm Max. gear width: 410 mm Max. module: 10 Max. hob diameter: 195 mm Table diameter: 700 mm Table speed range: 40-280 rpm Power capacity: 12.5 kW Voltage/Frequency: 220/50 V/Hz Iedpfsytimlox Apcsia Axial feed: 0.2-8 mm/min Radial feed: 0.1-2 mm/min Tangential feed: 0.1-2 mm/min Weight: 9 tons

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, It can be sold with a power cable for an additional 100 Euros to the price. Iodpovpgfasfx Apcjia

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, turning diameter: 1,600 mm, turning length: 3,500 mm, center height: 800 mm, spindle bore: 100 mm, faceplate diameter: 1,250 mm, Equipment: documentation/manual, For sale: 1 used facing and center lathe Manufacturer: Werkzeugmaschinenfabrik Zerbst GmbH Model: DP1 / S3 x 3500 Year of manufacture: 1994 Technical data: Maximum turning diameter over bed: 1,600 mm Distance between centers: 3,500 mm Spindle bore: 100 mm Face plate diameter: 1,250 mm Total machine weight: approx. 24.8 t Includes documentation. Additional pictures and videos can be provided upon request. Iiodpoyvt H Ajfx Apcea The following work has been performed on the machine over the past four years: - Tailstock completely overhauled at the end of 2022. New bearings, new center, and lubrication. - Cross slide refurbished in 2024. - Gibs reconditioned with new slideways; scuff marks on guideways smoothed by scraping. - Spindle bearing seats eased, gibs scraped on contact and slideway surfaces. - Lubrication pump cleaned and repaired, lubrication system made fully functional, some metering valves replaced, and new guideway wipers fabricated. The machine can be inspected at our warehouse in 09599 Freiberg by arrangement.

Condition: used, functionality: fully functional, This listing is for an industrial guillotine shear designed for cutting sheet metal with a maximum cutting length of 3040 mm and a maximum cutting thickness of 12 mm. The machine is equipped with a motorised back gauge with an adjustment range of 1000 mm, allowing precise positioning of the material. Iisdpfjylzcijx Apcoa The shear is fitted with 17 hold-down clamps to secure the material during cutting. The total connected electrical load is approximately 23 kW, operating at 400 V and 50 A. The machine weighs around 11 tonnes, with additional weight from attachments and accessories. Machine dimensions are approximately 4.5 m (length) x 4.0 m (width) x 2.2 m (height). Transport dimensions are about 5.0 m x 2.25 m x 2.2 m. Safety features include bright orange guards covering the moving parts in the upper cutting area and yellow safety fencing on the right side. Metal supports on the front bed help to hold the material securely during operation. The machine shows normal signs of wear consistent with industrial use, such as surface scratches and dirt. It is currently located in a well-lit industrial workshop environment, with visible hydraulic and mechanical components on the right side.

Condition: used, faceplate diameter 4.000 mm Ijdpfeywzxijx Apcjia travel -x axis 4.500 mm travel -z axis 600 mm control Siemens Sinumerik 840D-sl feed range 0 - 8.000 mm/min turning speeds 1) 0,7 - 5,6 U/min turning speeds 2) 2,8 - 22,4 U/min turning speeds 2,1 - 56 U/min tool taper Sauter Facing Lathe | ZERBST - DP05/W08 Scope of delivery: - Chip conveyor - Hydraulic unit The ZERBST - DP05/W08 has been retrofitted in 2010. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DP05W08 | DP05 W08 | DP05-W08