Intermediate crane runway

Wood-Mizer

Condition: as good as new (ex-display), Year of construction: 2025, warranty duration: 12 months, MP410EH30S Processing specifications: 4-sided Moulding Capacity Width 90-400mm Height 25-230mm Minimum material length 1m Maximum cutting depth 2mm 2-sided Moulding Capacity Width 90-400mm Height 25-230mm Minimum material length 1m Maximum cutting depth 5mm 1-sided Moulding or Thicknessing Capacity Width 90-400mm Height 25-230mm Minimum material length 1m Lhjdpfx Aiszvcapsqol Maximum cutting depth 5mm Cutterhead Specifications Upper Horizontal Cutter Diameter 122mm Width 510mm Power 11kW Speed 6000 rpm /min 50Hz Maximum cutting depth 5mm Lower Horizontal Cutter Diameter 122mm Width 510mm Power 11kW Speed 6000 rpm /min 50Hz Maximum cutting depth 5mm Vertical Cutters Diameter 122mm Maximum height 230mm Maximum diameter 142mm Power 5kW Speed 6000 rpm /min 50Hz Maximum cutting depth 5mm Maximum moulding depth 20mm Spindle diameter 40mm Feed Variable feed speed 5-18 m/min Smooth rollers 127mm Grooved rollers 28mm Soft roller 28mm Power / voltage Voltage / frequency 3 x 400 V, 50 Hz Total power 28.6kW Upper cutter 7.5kW Lower cutter 7.5kW Side cutters 5.5kW Upper feed 1.5kW Lower grooved feed 0.55kW Lower smooth feed 0.55kW Sawdust collector Port diameter 1x200mm 1x150mm Recommended fan power 10000m3/h

Condition: as good as new (ex-display), Year of construction: 2024, warranty duration: 12 months, • 3 kW electric motor • Cutting height: 103 mm Lsdpfxszqz Dps Aiqehl • Distance between the circular saw and the parallel guide: 800 mm • Sliding table length: 1100 mm • Sliding table width: 350 mm • Work table length: 900 mm • Overall table width: 950 mm

Condition: as good as new (ex-display), Three-row sliding conveyor for boards. Material is fed from a sorting table. Length: 2.4 m Height: 700 mm Width: 2.2 m Lsdpfx Aijzn I N Tsqehl Distance between chains: 1 m, with the option to mount additional chains every 0.5 m.

Condition: as good as new (ex-display), Conveyor belt for WM3500/WM4000 machine Conveyor belt length: 2.9 m Width: 900 cm Height: 1.05 m Lhodjzn I Ivepfx Aiqel

Condition: as good as new (ex-display), Segment for the LT15 Wide machine Ljdpfozn I Hlox Aiqehl Cutting length: 2.7 m Width: 1.07 m Manual: 2 supports, 1 presser Price per unit.

Condition: as good as new (ex-display), Roller table for EG800 multi-blade saw Lhedpfx Aozn Iyfoiqel Length: 1.6 m Height to the top of the roller: 900 mm Width: 738 mm

Condition: good (used), Year of construction: 2007, Mebor HTZ 1200 45kw motor 8m railway Lhsdsz Abwgjpfx Aiqol Logs ramp conveyor

Condition: excellent (used), Year of construction: 2024, Wood-Mizer CNC5003 CNC Machining Center – practically unused Key data • Category: CNC machining centers / CNC routers for wood (nesting) • Year of manufacture: [2024] • Condition: practically unused, demo / showroom unit • Location: [KOŁO], Poland • Availability: 2 units in identical specification — discount available if both are taken • Sold directly by the manufacturer, no intermediaries Description An industrial-grade CNC machining center at a mid-range machine price. Why this machine is worth considering • Only premium, branded components — no generic parts: FANUC, HSD, HIWIN, ATLANTA, FESTO, BECKER. Each of these components is serviceable and supported worldwide, independently of us as the machine builder. • FANUC control — the world's most widely used CNC platform, standard ISO G/M code, ready to interface with any CAM system. Support, training, and service are available from any authorized FANUC partner or CNC integrator. • Gantry design with dual drive — high stability and accuracy, high-resolution digital servos, low vibration. • 3095 × 1535 mm working area accommodates a full 3050 × 1530 mm panel — an entire sheet is machined in one setup, with no pre-cutting and no repositioning. • 6-zone vacuum nesting table with 216 vacuum points — exceptional flexibility in work-holding: panels, irregular parts, and porous materials. • The machine is on-site and available for inspection and a test cut before purchase, along with the available technical documentation. Technical data Specification Value Actual working area X / Y 3095 × 1535 mm (max. raster table area) Z-axis travel 200 mm Rapid traverse X / Y / Z 60 / 30 / 15 m/min Spindle HSD 11 kW, HSK63F, 24,000 rpm, inverter-driven, ceramic bearings Tool changer ATC — 12-position carousel on the gantry, service access hatch Drives and guideways ball screw, linear guides, and carriages by HIWIN; rack and pinion by ATLANTA Control FANUC, ISO G/M code, PC and CAM interface, built-in server Table grey extruded polypropylene raster table; 6 zones × 36 points = 216 individual vacuum points, each zone with its own valve Vacuum pump BECKER, 126 m³/h, 4 / 5.5 kW, max. vacuum 0.9 bar Pneumatics FESTO Chip extraction articulated extraction hood Lhjdpeyr Dawofx Aiqol Control panel movable, on wheels — access from 3 sides of the table; local operation or via network Frame size (footprint) 1570 × 4150 mm Total length / width / height 4460 / 3000 / 2400 mm Materials: wood, sheet materials, plastics, foam, composites, light alloys (aluminum). Terms of sale — stated openly • Sold as-is, without a manufacturer's warranty and without service support from our side — our CNC project has been discontinued. This is the only reason for this price. • Service and wear parts are available directly from the component manufacturers (FANUC, HSD, HIWIN, BECKER, FESTO) and from independent CNC integrators. • Inspection and a test run on-site are welcome — bring your own material and file. • Net price, EXW [KOŁO]. Loading is our responsibility; transport and unloading are the buyer's responsibility. Intra-community supply (0% VAT) for EU buyers with a valid VAT ID. • We can connect you with companies offering commissioning and operator training (third-party service, priced separately).

Condition: new, Year of construction: 2024, 7.5 kW electric motor V-type log feeding system Set of additional rollers Set of pneumatic side discs Cutting dimensions Max. log diameter: 400 mm Min. log diameter: 100 mm Max. log length: 3.6 m Lhsdpsztnaiofx Aiqjl Min. log length: 1.2 m Max. cutting width: 250 mm Min. cutting width: 7 cm Headstock equipment Automatic cutting width adjustment device (Setworks) Headstock adjustment: electric Blade cleaning system: LubeMizer Blade tensioning system: hydraulic Heavy-duty log clamping rollers Spiked rollers Blade Length: 4670 mm Width: 32 mm, 35 mm, 38 mm Thickness: 1.07 mm, 1.14 mm, 1.27 mm, 1.40 mm Blade guide wheels Diameter: 600 mm Type: with belt Feeding system Speed: 0-20 m/min

Condition: new, Year of construction: 2025, EG300EH25S-EMR Ledpeyynq Refx Aiqshl Main motor power 18.5 kW 5 circular saw blades (4 fixed and 1 movable), Setworks device for automatic setting of cutting parameters Set of two lasers Set of 5 circular saw blades Adjustable feed speed 0-25 m/min 4 driven rollers Infeed/outfeed table Roller conveyors Saw blade diameter: 350mm Min. board length: 700mm Max. board thickness: 60mm Min. board thickness: 16mm Max. board width: 550mm Max. cutting width: 420mm Min. cutting width: 20mm Chip box