Twin-rotor prebreaker

ZENO ZDV 2500x2000

Condition: new, ZENO Twin rotor shredder ZDV 2500x2000, mobile on chain chassis, incl. discharge conveyor and magnet separator, motor power 298 kW, 1900 rpm, MTU-Diesel motor, rotor flight circle Ø 575 mm, 2 x 12 cutting inserts on tool holder, show machine. Lidwyzqpf

Condition: new, Hopper opening: 2.500 x 2.000 mm Rotors: 2 pcs. Rotor flight circle: 580 mm each K9Ddz Rotor design: 5 and 6 cutting teeth Drive: 2 x 90 kW with planetary gears Hydraulic screen flap interlock for the discharge of contaminants Weight: approx. 18.500 kg

Condition: repair required (used), Year of construction: 1992, Feed opening: 600 x 1,000 mm Hopper capacity: 0.6 m³ Throughput: 2.0 - 3.5 rm/h depending on material and screen Rotor diameter: 250 mm Cbydpeobuw Rotor length: 600 mm Number of tools: 20 teeth Screen perforation: Hydraulic push floor: Yes Suction nozzle: 160 mm Air speed: 23 m/sec Motor power: 15 kW The machine's bearings need to be replaced. The machine needs to be overhauled. Therefore, it is being sold at a reduced price. Location: From stock, 54634 Bitburg - available immediately -

Condition: excellent (used), Year of construction: 2010, operating hours: 56,748 h, Functionality: fully functional, overall weight: 5,400 kg, rotor width: 1,600 mm, power: 45 kW (61.18 HP), rotational speed (max.): 107 rpm, rotor flight circle: 380 mm, working width: 1,600 mm, blade width: 40 mm, Technical data shredder: Manufacturer ZENO Zerkleinerungsmaschinenbau Norken GmbH Type ZTLL 1400 x 1600 Year of construction 2010 Operating hours 56,748 hours Inlet cross-section 1400 x 1600 mm Main drive power 45 kW Rated current 81 A Hydraulic slide gate drive 2.2 kW Rotor flight circle 380 mm Rotor speed approx. 107 rpm Number of cutting tools 52 knives, 40 x 40 mm, with tool holders Screen perforation 40 mm Weight approx. 5400 kg Scope of delivery: Only the shredder with control cabinet is for sale. The discharge conveyor belt and the air conveyor system are not included in the scope of delivery. Dqj8Ib Remark: The shredder was used for shredding nonwovens and needle felts etc. and is in good, immediately usable condition. The machine is being replaced by a larger shredder due to its low throughput capacity. The machine is currently still assembled and can be inspected under power. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, machine/vehicle number: 12428, Rotor width: 1800 mm1 row of stator knivesInlet: approx. 1800 x 1900 mmDrive: 90 kW Csomyit8P3

Condition: like new (used), Functionality: fully functional, Year of construction: 1997, For sale is a 30 KW wood chipper, in like new condition. For more information, please call. Drdswd

Condition: ready for operation (used), Working width: 1400mm, infeed cross-section X/Y: 1400mm/1600mm, drive: 45kW, 1500rpm, rotor flight circle: 380mm, rotor speed: approx. 105rpm, number of cutting tools: 52, screen design: 12mm perforation, screen diameter: 30mm, hydraulic unit: 2.2kW, 1420rpm. Dimensions X/Y/Z: 2740mm/2270mm/2390mm, weight: approx. 5400kg. Documentation available. Ct2T27Srp

Condition: excellent (used), Year of construction: 2021, Year of construction: 2021/2022 Space requirement for entire system: 10x32 meters Total connected load: approx. 350 kW Peak value: approx. 120 kW Dq8U3X Average value: approx. 90 kW Personnel requirement: min. 2 people Cutting capacity: maximum 80-100 fm/8h Round log diameter: min. 10cm max. 100cm Round log lengths: min. 100cm max. 600cm Edging system: 3-stack variable / 120mm cutting height Due to a restructuring of the company, a new, complete band sawmill is for sale as follows: - Round log feeder - Block puller - Balz debarking machine BG 90 6W-GR - Steep conveyor with feeder - Tension carriage ELCA Legno CRO 17 - Band saw ELCA Legno SNI 14 - Conveyor belt - Trimming machine Möhringer 323 001 12 - Stacking system M-TEC - Disposal line / chipping system ZENO ZTI 600/520/160

Condition: like new (used), - made in Germany - new knives and counter-knives TECHNICAL PARAMETERS: - feeding dimension 520x1000 mm Bccebn8Qz - motor power 80 kW - four rows of knives - counter knife - sieve 20 x 20 mm - sieve dimension 1000 x 900 mm - rotor diameter 600 mm - rotation of shaft 830 rpm Overall dimensions of the machine 235x170x290 cm weight ~ 4000 kg

Condition: repair required (used), Year of construction: 2018, operating hours: 400 h, Functionality: limited functionality, overall weight: 12,000 kg, rotor diameter: 600 mm, rotor width: 1,600 mm, cutting force: 3 t, rotational speed (min.): 120 rpm, power: 2 kW (2.72 HP), Drive power: 2 x 55 kW Sieve: 35 mm hexagonal Sieve design: solid sieve basket, reinforced with ribs, including quick-change sieve device Counter blade: with cutting gap adjustment Hopper: 1,075 mm high, without lid with maintenance door and fill level sensor (Sonar Bero) Gearbox: compact gearbox with torque cut-off Filling opening: 1,600 x 1,600 mm Rotor speed: approx. 80 - 120 rpm Rotor flight pitch: 600 mm Rotor design: 4 rows (76 pieces) of positive cutting inserts 60 x 60 mm on tool holders Rotor bearing: pedestal bearing Machine base and slider base: grooved Weight: approx. 13,400 kg Cqomw07Mmm

Condition: good (used), Year of construction: 1994, Drum chipper, high-speed chipper with horizontal infeed max. infeed width 300 mm max. infeed height 85 mm Motor 18.5 kw Bskh8K7Ss7E frequency-controlled for variable speed without vibrating chute

Condition: used, Year of construction: 1993, Feed opening: 800 x 1,000 mm Hopper capacity: 0.8 m³ Throughput capacity: 2.5 - 4 rm/h depending on material and screen Rotor diameter: 300 mm Rotor length: 800 mm Number of tools: 20 teeth Screen perforation: Hydraulic push floor: Yes Suction nozzle: 250mm Air speed: 28 m/sec Motor power: 15kW Bhwrftxx2Bd Operating hours: 4165

Condition: ready for operation (used), Year of construction: 2010, Working width: 1600mm, infeed cross-section X/Y: 1600mm/2300mm, main drive: 75kW, 1500rpm, rotor flight circle: 600mm, rotor speed: approx. 85rpm, number of cutting tools: 42, screen design: perforation 40mm. Dimensions X/Y/Z: 5015mm/2650mm/2935mm, weight: approx. 14000kg. Documentation available. Miyywpxzm

Condition: used, Year of construction: 2000, 75kW incl. trough chain conveyor ZENO TKF 600x7600 (2007) and magnetic drum ZENO ZMT 500x620 (2007) B8T2Efnrzq

Condition: used, Inlet cross section: 5,000 x 3,500 mm Drive: 2 x 110 kW Hydraulic power unit slider: 22 kW rotor flight circle: 635 mm Rotor design: 244 pcs. inserts on tool holders Bmi2Dsxs Screen design: solid screen basket, reinforced with ribs, hydraulically swivelling away hopper volume: approx. 40 m³ machine weight: approx. 55 t

Condition: good (used), Year of construction: 2006, Drum chipper, high-speed with horizontal infeed Bskh3Pkhn3Q max. infeed width 450 mm max. infeed height 140 mm Motor 75 kw with frequency converter for variable speed no vibrating chute included

Condition: as good as new (ex-display), Infeed width: 720 mm Infeed height: 330 mm Rotor diameter: 1,000 mm Rotor knives: 2 pcs Stator knife: 1 pc Infeed unit: 2 x 3 rollers Motor: 110 kW M0Gs2Kin Machine weight: approx. 8,000 kg

Condition: good (used), Year of construction: 1994, power: 30 kW (40.79 HP), Drum chipper with horizontal infeed max. feed width 300 mm max. feed height 85 mm Br9Mwxngk3W Motor 30 kw

Condition: new, Exhibition machine J9W0Yb Infeed width: 1,400 mm Infeed height: 550 mm Rotor diameter: 1,600 mm Rotor knives: 4 pcs Stator knife: 1 pc, externally adjustable Infeed unit: 2 x 5 rollers Motor: 250-500 kW Machine weight: approx. 30,000 kg

Condition: good (used), Year of construction: 2006, overall weight: 2,500 kg, Drum chipper with horizontal infeed max. feed width 450 mm max. feed height 140 mm Motor 75 kw Br9Mvztqymm

Condition: excellent (used), Complete shredding and screening plant for the production of refuse derived fuels. Consisting of: Pre-shredder ZVZ 3000 Overband magnetic separator Mriouayn Disc separator ZENO ZSS Shredder ZTLL 2500x1900 Conveyor system

Condition: good (used), Intake opening: 1.000 x 1.200 mm Motor power: 37 kW Rotor flight circle: 450 mm Gpczjcvv0 Rotor speed: approx. 86 rpm Cutting system: 51 cutting inserts Screen: quick-change-device, Ø 80mm Machine weight: approx. 3.500 kg

Condition: used, Inlet cross section: 1,600 x 1,200 mm drive power: 2 x 45 kW knife width: 55 mm Hgnkzuf number of knives: 56 pieces, screwed together rotor flight circle: 655 mm Planetary gear

Condition: used, inlet cross section: 2500 x 1700 mm Drive: 160 kW rotor flight circle: 670 mm Discharge of contaminants: hydraulically pre-stressed and openable flaps for discharge of contaminants rotor execution: 14 pcs. positive cutting plates 120x120x55 mm on tool holders counter knife: with cutting gap adjustment Feeding device: hydraulic hopper: 1.700 mm high, with revolving pipe line tube Bmvcdzm2 machine weight: approx. 24.000 kg

Condition: as good as new (ex-display), Intake opening: 2000 x 1900 mm Motor power: 2 x 75 kW Rotor flight circle: Ø 600 mm Rotor speed: approx. 84 rpm Cutting system: 152 cutting inserts 40x40x20 mm on toolholders Screen perforation: with this Screen perforation is for achieving the security levels P2 to P5 Counter knife: with cutting gap adjustment Machine weight: approx. 21.000 kg Ts3Midx2P Machine number: A 32