Screen printing machine

Zentner Washer 250

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, machine/vehicle number: 6F070, total length: 1,800 mm, total width: 1,150 mm, total height: 1,600 mm, type of input current: three-phase, input voltage: 200 V, power: 3 kW (4.08 HP), overall weight: 1,400 kg, Equipment: documentation/manual, 1978 very original in excellent condition one color offset machine from the Japanese Sakurai with never used Number Perforating and Impression unit (sprayed in tectyl and deliberately not cleaned by us) is really for that time, compared to other makes incl Heideleberg's GTO46 a top class machine. Very nice and solid machine. Dksdpfx Ajuga U Djh Sjg Paper size 32 x 49 cm working with the same size plates as at that time the Rotaprint broadened models as well as Romayor and Fuji 50. The condition is so fine that it would almost be allowed in the reception room of the manufacturer. All documentation is included, electrical schematics are complete with legend and parts book belongs to this machine.

Condition: ready for operation (used), Year of construction: 2013, sheet thickness steel (max.): 25 mm, power: 6 kW (8.16 HP), Working area 3000x1500. Loadmaster system included.Due to not using machine for longer time,the service is required. Dkjdpfswh R R Nsx Ah Ssg

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 92 h, load capacity: 2,000 kg, lifting height: 4,780 mm, free lift: 1,497 mm, fuel type: electric, mast type: triplex, construction height: 2,105 mm, fork carriage width: 940 mm, fork length: 1,220 mm, empty load weight: 3,745 kg, total length: 2,100 mm, drive type: Elektro, construction width: 1,115 mm, Electric 3-wheel forklift Load center: 500 mm Fork width: 100 mm Fork thickness: 40 mm ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Technical condition: very good Front tires type: Superelastic Dsdpsvth Epofx Ah Sjkg Front tire size: 200/50-10 Front tire condition: 80 - 100% Rear tires type: Superelastic Rear tire size: 15x4.5-8 Rear tire condition: 80 - 100% Battery voltage: 48V Battery capacity: 625Ah Battery manufacturer: TAB batteries Battery year of manufacture: 2024 Battery condition: New Description: Triplex mast with tilting function: 6°Back / 6°Forward Attached side shifter (shifter type) width: 940 mm (37") Load backrest 940 mm (37") x 1,220 mm (48") (width x height) 3rd valve, 4th valve, rear work light, front work light, overhead guard, windscreen, load backrest, safety light, 4 hydraulic functions – mechanical single-lever hose routing: double (four internal hoses) steering wheel knob, seat switch, Grammer (MSG65) driver’s seat with imitation leather cover (fully suspended), two front headlights (mounted on the overhead guard), rear combination light, front indicators, strobe light (yellow), acoustic reversing alarm, socket wrench, paint: CLARK Hot Yellow Green, Cab – Level 2 – weather protection, steel overhead guard and windscreen.

Condition: new, Year of construction: 2025, Roll forming metal siding “double façade panel” machine SPM-2 Roll forming metal siding “double façade panel” machine SPM-2 is new design product of our company for façade and wall metal panels forming with the necessary configuration. These double façade panels are very popular in construction business of cladding residential buildings and industrial structures, for the construction of fences of various configurations, gazebos, roofing elements, etc. The SPM-2 metal siding production line is fully automatic and consists of a rolling part of the machine, an automation system and guillotine cutting shears at the machine exit. The line can have as additional parts a manual or automatic uncoiler for metal rolls, depending on the customer's needs. As standard version, this metal siding double façade panels roll forming machine SPM-2 makes a flat panel profile, but with the additional equipment, it is possible to roll panels with a microwave or rib shape profile. To start rolling, it is necessary to install a roll of metal to the decoiler and to put the end of the strip to the first rolling rollers of the equipment and feed it into them. After step by step, to put the metal to the next rollers, adjusting it if necessary. Dksdpfjxghngjx Ah Seg When metal comes to the cutting device of machine you need to feed metal into cutting knives and to make “zero” cut. After such step, equipment can move to automatic operation mode. The control panel of machine has the ability to set the number of tasks and the length of products, single tasks or to work in multitasking mode. After setting up necessary parameters the machine will automatically roll the metal cladding wall panels and cut them into necessary sizes. Thus, the customer will receive final product as quickly as possible and with the highest possible result. The roll forming speed is adjustable and can be up to 10-15 meters per minute. The SPM-2 metal wall cladding panels production line has special tools for punching out fastening holes on the side of the panel. It makes possible for the customer to get more interesting solution options and to offer a wider range of products to the end user. The rolling part of the machine has 18 pairs of forming steps, ensuring high quality of final product. You can get machine with protective cover or without it as per your request preferences. Specifications Material width (mm) 416 The material thickness (mm) 0,4-0,5 Engine power (kW) 3 + 1,1 Rolling speed (m/min) 10-15

Condition: new, Year of construction: 2024, functionality: fully functional, SY-ZP4A Rotary disc precision sand Dksdpjwcfvpofx Ah Sog Dry blasting machine year 2024

Condition: good (used), - Used machine - Passage width: 1350 mm Dkodpfxjwhvfxj Ah Sog - Rubber sanding roller - Rubber sanding roller - Sanding pad with cushion - Vacuum carpet - Rated current: 131 A - Rated power: 62.7 kW - Voltage: 400 V

Condition: good (used), Year of construction: 2017, fuel type: electric, Vehicle description 2 pieces electric forklift LINDE E16C-02 EVO YEAR 2017 Stacker 1 with 6.363 hours Stacker 2 with 6.142 hours Dkedpjipqz Ejfx Ah Ssg both compl. identical in construction !!! 1,6 tons lifting capacity 2,1 meter headroom 4,62 meters lifting height - Triplex free lift mast - sideshift - loader - Working headlight - original paint - ready for immediate use Selling price: 18.500,-- net per forklift !!! Also favorable delivery possible !!!

Condition: used, Digital textile printing machine, pigments inks, GOTS and Oekotex 100, class baby articles, printing width 1.80m Technical specifications - Ink type: Kornit NeoPigment™ Intenso, water-based - Color channels: 7 (CMYK + Red, Green, Grey) - Pre-treatment: integrated 8th channel - Print heads: 64x Spectra Polaris (recirculating) - Print width: up to 180 cm - Print speed: up to 200 m²/h - Print resolution: 400–1200 dpi (recommended 600 x 600 dpi, 6-pass, interlaced) - Ink capacity: 4 liters per color - Weight: approx. 3,500 kg - Power supply: 3-phase, 25 kW, 110/220 V, 50/60 Hz Dkodpfxsw Tynms Ah Seg

Condition: reconditioned (used), Year of construction: 1996, functionality: fully functional, input voltage: 400 V, Thieme 520 semi-automatic angular-opening machine Year of manufacture: 1996 Print format: 750 x 1050 mm Condition: Final stage of restoration Djdpsxk T D Ujfx Ah Sokg Sartech is a company specializing in screen printing, automation, and robotics solutions, as well as the manufacture of UV (electronic) or hot air curing tunnels.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Tunkers Vorwärts S1100 fully automatic sheet to sheet laminating machine. Dodpov Rpknefx Ah Sskg Sheet to sheet laminating machine which is in good condition and was used a few times for specific jobs. Dismantled and packed, ready for shipment.