Lathe

Zimmermann FZ

Condition: excellent (used), Year of construction: 2014, x-travel 2500 mm y-travel 3000 mm z-travel 1250 mm Control HEIDENHAIN iTNC530 spindle turning speed - stepless 22000 U/min c-axis +-300° milling-head swivable +/- +-110° tool taper HSK 63 A tool change unit 50 Pos. total power requirement 130 kW weight of the machine ca. 53,5 t dimensions of the machine ca. 7,6 x 7,3 x 5,7 m This ZIMMERMANN FZ33c is available immediately and in good condition. - NEW spindle received 6 months ago Description: Technical specifications of the machine and working ranges X-axis 2500 mm Y-axis 3000 mm Z-axis 1250 mm A-axis ± 110 ° C-axis ± 300 ° Ppedpfx Afszak Hgs Rsw Includes vibration sensor Includes bearing temperature sensor Includes rotary joint for internal tool magazine feed (IKZ) 5-axis path control: Heidenhain iTNC 530/handwheel HR520, 15” TFT colour display Extraction system LTA Industrial Air Cleaning Machine room canopy 50-position tool changer, chain magazine, behind the machine Chip conveyor, ejection 60° to the left, front-facing No probe available!!! Blum Laser tool measurement ‘Control NT-Micro’ Clamping table Length x width x height 2500 x 3250 x 400 mm Table load 8000 kg/m² (max. 16000 kg) T-slots, arranged longitudinally 18H12 T-slot spacing 250 mm Dimensions, weights Footprint (excluding peripheral equipment) approx. 7600 x 7300 x 5650 mm Total weight approx. 53500 kg Electrical connection data Voltage (three-phase) 400 V Frequency 50 Hz Compressed air connection (to be provided by customer) Required air pressure 6 bar Average air consumption approx. 15 m³/h (depending on machine configuration) Linear axis drives Feed rate X, Y, Z axes 60 m/min Axis acceleration X, Y, Z axes up to 5 m/s² Rotary axis drives – VH30 Feed rate A- and C-axis 360 °/s Axis acceleration A- and C-axis 700 °/s² Resolution A- and C-axis 0.0001 Accuracies of linear axes – in accordance with VDI / DGQ 3441 Positioning accuracy X-axis P= 0.026 mm Y-axis P= 0.028 mm Z-axis P= 0.020 mm Repeatability X-axis Ps= 0.015 mm Y-axis Ps= 0.016 mm Z-axis Ps= 0.010 mm Resolution of measuring systems (interpol) A-, C-axis 0.0001° Accuracy of rotary axes – VH30 Positioning accuracy A- and C-axis P= 12" = 0.0033° Repeatability A- and C-axis Ps= 8" = 0.0022° VH30 milling head 2-axis milling head: VH30, Siemens Weiss milling spindle Spindle power S1 (100% duty cycle) 60 kW, Spindle speed 22,000 rpm, 95 Nm, HSK-A63 External dimensions of fork head L x W approx. 500 x 600 mm Nominal torque of rotary axes Control loop A: min. 1,200 Nm C: min. 1,047 Nm Clamped A and C axes: 3,000 Nm (Continuous grease lubrication with automatic relubrication system) Swivel axis – spindle nose 326 mm Tool holder HSK 63 A Tool clamping Spring clamp Tool unclamping Hydraulic Permissible tool weight 4.5 kg (manufacturer’s specification) Coolant supply External and internal Coolant/lubricant supply (emulsion) at the front of the milling spindle with belt filter system Volume 1500 l Pump 1: 40 l/min at 20 bar Pump 2: 20 l/min at 40 bar, Air blow at the front of the milling spindle

Year of construction: 1994, condition: excellent (used), Dear customers, we are currently offering a universal milling machine for model and mold making, manufactured by Zimmermann. Here are the technical specifications of the machine: Work table: 750 x 500 mm Longitudinal travel: 810 mm Transverse travel: 315 mm Milling height: 0 - 470 mm Ppodpfszlibfjx Af Row T-slots: 6 x 14 mm Spindle speeds: 56 - 4,500 rpm Tool holder: ISO40 / SK40 - Digital display with Heidenhain scales - Motorized vertical adjustment of the table Space requirement: 2,000 x 2,500 x 2,400 mm Weight: 2,400 kg !! Condition and scope: see pictures !! Price plus VAT, which will be shown separately on the invoice. Worldwide transport is possible for an additional fee! If you have any questions, please do not hesitate to contact us.

Condition: refurbished (used), Year of construction: 2026, Dear customers, we currently offer a refurbished table-mounted milling machine, type FZ0, from the manufacturer F. Zimmermann. Here are the technical specifications of the machine: Table size: 430 x 240 mm Ppodezliahepfx Af Rew T-slots: 12 mm / 3 pieces Travel in X-axis: 240 mm Travel in Y-axis: 160 mm Rotational movement: 360° Swivel: 2x90° Spindle power: 0.25 kW Speed: 22,000 rpm Tool holder: collet chuck with locknut, Ø 8 mm - CE marking - Support/cross table - Milling guard made of Plexiglas - original base cabinet (optional) Dimensions: 1,100 x 1,180 x 1,760 mm Weight: 180 kg The machine has been painted in RAL 7035 light gray, the drives have been cleaned, inspected, and fitted with a new belt. You will receive a set of milling tools with the machine. VAT will be shown separately on the invoice. Shipping is possible for an additional charge. If you have any questions, please do not hesitate to contact us!

Condition: used, Year of construction: 1986, table size cross table 490 x 400 mm Pjdpfx Asxbh E Uof Rjpw axis stroke (X,Y,Z) 320x385x430 mm reus 560 - 14000 U/min tool taper SK 30 table load max. 100 kg Weight ca. 500 kg

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,360 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 15,000 rpm, controller model: Heidenhain TNC430 PA, Submitting a bid obligates you to collect the machine on time, during calendar week 25! TECHNICAL DETAILS Travel range X-axis: 3,000 mm Travel range Y-axis: 2,360 mm Travel range Z-axis: 1,000 mm Feed rate X-axis: 20 m/min Feed rate Y-axis: 20 m/min Feed rate Z-axis: 20 m/min Rapid traverse rate X-axis: 20 m/min Rapid traverse rate Y-axis: 20 m/min Rapid traverse rate Z-axis: 20 m/min Spindle speed (max.): 15,000 rpm Torque: 57 Nm Spindle power: 18 kW Work table (L x W x H): 4,500 x 2,000 x 400 mm T-slots, lengthwise: 18H12 Distance between T-slots: 250 mm Pjdpfxoy Sxkrj Af Ropw Tool interface: HSK 63 F Tool clamping: hydraulic MACHINE DETAILS Control system: Heidenhain TNC430 PA Type of input current: Three-phase Power requirement: 20 kW Frequency: 50 Hz Voltage: 400 V Fuse rating: 63 A Dimensions & Weight Machine footprint without control cabinet (L x W x H): 6,000 x 3,500 x 4,050 mm Total weight: 15,000 kg EQUIPMENT Spindle speed infinitely adjustable Tool changer TT140 measuring probe Note: Machine without enclosure. The zero-point clamping plates and other accessories shown in the pictures are not included in the scope of delivery.

Year of construction: 1985, condition: ready for operation (used), A conventional milling machine Zimmermann including a Heidenhain digital display is available. Table dimensions X/Y: 1400mm/800mm, tool holder: SK40, travel X/Y/Z: 1600mm/900mm/300mm, spindle-table distance range: 30mm-1180mm, milling head swivel: 45°/90°, feed rate: 2400mm/min, speed: 2800rpm. Machine dimensions X/Y/Z: approx. 3600mm/3000mm/3150mm, weight: approx. 5000kg. Documentation available. An on-site inspection is possible. Pedpfjy Eqtpjx Af Rspw

Condition: excellent (used), Year of construction: 2008, Universal Table Router FZ0 by Zimmermann Modelling milling machine with variable-speed Bosch motor GGS 27 LC Ideally suited for model making and tool & die applications. Drive motor: 230 Volt, 0.6 kW Adjustable spindle speed approx. 12,000 to 27,000 rpm Machine table approx. 590 x 420 mm Ppedpfow Ip Dgex Af Row Unit swivels 90 degrees to both sides Longitudinal fence with fine adjustment Extraction hood and safety guard Collet chucks for 6 mm and 8 mm Includes the cutters and milling bits shown in the pictures Comes with lockable base cabinet, 2 drawers and 1 door; key included The base cabinet was modified by the previous owner with an aluminium sheet and angles to provide an integrated extraction option, see photos Waldmann surface-mounted lamp with magnifier attachment Original paint, partially touched up CE mark Very well-maintained machine from the prototype manufacturing section of a motorsport department at a Wolfsburg automotive manufacturer. Evidently, it has seen very little use so far. Machine dimensions approx. 680 x 600 x 780 mm (L x W x H) Cabinet dimensions approx. 600 x 620 x 880 mm (L x W x H) Weight approx. 190 kg The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse – see “more offers from this seller.”

Condition: ready for operation (used), Year of construction: 2002, operating hours: 4,486 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,360 mm, travel distance Z-axis: 1,500 mm, rotational speed (max.): 18,000 rpm, controller model: Fidia C20 mit Bedienteil HPX, The machine is in fully operational, very good condition. It has been dismantled, is in storage, and available immediately! Psdpfoywgyrex Af Repw TECHNICAL DETAILS Travel range X-axis: 3,000 mm Travel range Y-axis: 2,360 mm Travel range Z-axis: 1,500 mm Rotary axis A: 105° Rotary axis C: 300° Clamping area: 5,000 mm x 2,000 mm Table load: 15,000 kg/m² T-slot spacing: 18H12 / 250 mm Feed rate X, Y, Z axes: 20 m/min Axis acceleration X, Y, Z axes: 1.5 m/s² Max. spindle speed: 18,000 rpm Torque: 90 Nm Tool holder: HSK 63A MACHINE DETAILS Spindle power: 28 kW Connected load: 40 kW Main fuse: 80 A Spindle hours: 4,486 h Machine hours: 146,161 h Dimensions & Weight Space required for machine with peripherals (L x W x H): 7,300 x 5,600 x 5,600 mm Machine weight: 16,500 kg EQUIPMENT 3-sided enclosure, without extraction ducts

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 7,000 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 2,000 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 18,000 rpm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 30 m/min, torque: 38 Nm, overall weight: 65,000 kg, Initial commissioning: 2012 Control system: Heidenhain iTNC 530 X-axis: approx. 7,000 mm Y-axis: approx. 3,500 mm Z-axis: approx. 2,000 mm A-axis: ± 100° C-axis: ± 360° Clamping table: 6,000 x 3,000 x 160 mm (sunken) with 18H12 T-slots / 250 mm spacing 2-axis milling head VH 12 Spindle power: 24 kW Spindle speed: max. 18,000 rpm Torque: max. 38 Nm Tool holder: HSK 63A Linear axis drives Feed rate X, Y, Z axes: up to 50 m/min / 30 m/min Axis acceleration X, Y, Z axes: up to 2.5 m/s² Connection data Voltage: 400 V Frequency: 50 Hz Main fuse: 200 A Power consumption: 85 kVA Dimensions, weights Machine footprint without peripherals: approx. 10,000 x 6,650 x 5,900 mm Total weight: approx. 65,000 kg Additional equipment - Double-sided access doors Pjdpfxsyrdc Eo Af Rspw - 10-position tool changer Optional at extra cost: - Wireless probe - Heidenhain remote diagnostics Machine condition Fully functional, very good condition. Can be inspected under power. !!! The machine was completely mechanically overhauled in 2022 !!!

Year of construction: 1997, condition: excellent (used), machine/vehicle number: 1095, Dear Customers Currently we offer you a universal milling machine for the model and mold making of the brand Zimmermann. Here are the technical data of the machine: Work table: 630 x 490 mm Support table: 490 x 400 mm Round movement: 360 ° Pivoting: 2x 90 ° Tension groove: 14 x 25 mm Power: 1,1 kW Speeds: 560 - 14,000 rpm Tool holder: ISO30 / SK30 - Motorbrake - motor-driven height adjustment - digital read-out with Heidenhain meassuring system - cabinet Space required: 1,400 x 1,520 x 1,970 mm Weight: 790 kg The machine was cleaned completely including the support table. The technical as well as optical condition of the machine is top! We look forward to your questions and inquiries. Pedpoxy Ntqofx Af Ropw