Lead/traction spindle lathe

ZMM CU400 1500 x 210 mm

Condition: good (used), Year of construction: 2008, Technical data: Center height: 400 mm Turning diameter: 890 mm Turning diameter over slide: 490 mm Bog9Dhvl9K3 Turning diameter in the offset: 1050 mm Center distance: 1500 mm Revolutions: 6 - 1250 rpm spindle bore: 155 mm Digital position indicator: ACU-RITE Bed width: 700 mm Tool holder: MK 6 Motor power: 22 kW CE mark Dimensions (length x width x height): approx. 3100 x 1700 x 1700 mm Weight: approx. 7.5 tons The seller is not liable for typing or data transmission errors. The machine is in appearance, technology and wear according to the age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2008, Technical data: Center height: 290 mm Turning diameter: 580 mm Turning diameter over slide: 380 mm Turning diameter in the offset: 780 mm Do2Hsl Center distance: 1500 mm Revolutions: 25 - 2000 rpm spindle bore: 72 mm Digital position indicator: NEWALL C80 (X / Y) bed width: 400 mm tool holder: MK 5 Motor power: 11 kW Dimensions (length x width x height): approx. 3100 x 1300 x 1600 mm Weight: approx. 3.5 tons Accessories: Feed and rapid traverse via joystick Splitting and tool quick changer The seller is not liable for typing or data transmission errors. The machine's appearance, technology and wear correspond to its age; used machines are sold without any warranty.

Condition: new, turning diameter 440 mm turning length 1500 mm swing diameter over bed slide 210 mm Swingdiameter in the bed bridge 620 mm centre height 210 mm reus 21 (20 - 2000) U/min tail stock MK5 quill stroke 180 mm diameter of quill 70 mm spindle taper DIN 55027 Nr. 8 spindle bore 62 mm feed längs 0,04 - 12 m/min feed quer 0,02 - 6 m/min total power requirement 7,5 kW weight of the machine ca. 2430 kg dimensions of the machine ca. 2850 x 980 x 1330 mm - Coolant device - Machine light - Chip back wall - Spindle protection - Lathe chuck protection - Tool holder protection - Interchangeable gears *Special equipment - 3-jaw chuck Ø 250 mm type 3204/ DIN6350, BISON - MULTIFIX quick-change holder type B, including 4 tool holders Bcgcvawduec - 3-axis digital display DRO Newall - Foot pedal with brake function CE

Condition: excellent (used), Year of construction: 2000, Dreh-Øüber Bett 320 mm Dreh-Øüber Support 185 mm turning length 1000 mm Spindelbohrungs -Ø/ Aufnahme 32 mm mm spindle turning speed range (12) 85 - 2000 U/min feeds - longitudinal 0,006 - 1,77 mm/min feeds - cross 0,003 - 0,888 mm/min thread - mm pitch 0,1 - 28 mm thread - module 0,1 - 1,75 mm thread - inch 2,5 - 75 inch. Beqlp9Spb voltage 400 V / 50 Hz power capacity 2,2 kW weight of the machine ca. 0.8 t dimensions of the machine ca. 1,8 x 0,8 x 1,4 m Quick-change toolholder with 5 cassettes, fixed steady, 3-jaw chuck Ø 200 mm, coolant device,

Condition: new, turning diameter 440 mm turning length 1000 mm swing diameter over bed slide 210 mm Swingdiameter in the bed bridge 620 mm centre height 210 mm reus 21 (20 - 2000) U/min tail stock MK5 quill stroke 180 mm diameter of quill 70 mm spindle taper DIN 55027 Nr. 8 spindle bore 62 mm feed längs 0,04 - 12 m/min feed quer 0,02 - 6 m/min total power requirement 7,5 kW weight of the machine ca. 2250 kg dimensions of the machine ca. 2450 x 980 x 1330 mm - Coolant device - Machine light - Chip back wall - Spindle protection - Lathe chuck protection - Tool holder protection - Interchangeable gears *Special equipment - 3-jaw chuck Ø 250 mm type 3204/ DIN6350, BISON L9Nq08Nk2B - MULTIFIX quick-change holder type B, including 4 tool holders - 3-axis digital display DRO Newall - Foot pedal with brake function CE

Condition: good (used), Steel floor plates Length: 2210 mm Width: 1500 mm Thickness: 260 mm With T-slots in both directions Weight: approx 2 T 7 same plates available. Il7Evay8

Condition: good (used), Used parallel lathe ZMM MOD. CU 580M Bk9Rfbiwgwu Center height : mm 290 Distance between centers : mm 2000 Rapids for longitudinal and transverse feed Supplied axis visulizer 3-jaw chuck supplied Accessories

Condition: new, Parallel lathe with display Fervi T075/400V3A. Monoblock cast iron base. Height of Centers 230 mm Max. diameter on Bench 460 mm Max. diameter on Carriage 270 mm Max. diameter on Slot 690 mm Tool Height 25 mm Distance between Centers 1500 mm Distance between Guides 300 mm Bar Taper CM MT7 Bar Passage 80 mm Spindle Attachment Camlock D1-8 Spindle Speed (12)25-1700 rpm Longitudinal Feeds (42) 0.031 - 1.7 mm/rev Cross Feeds (42) 0.014 - 0.784 mm/rev Metric Threads (41) 0.1 - 14 mm Inch Threads (60) 2 - 112 TPI Tailstock Spindle Stroke 130 mm Taper CM MT4 Motor 400 V 50 Hz 5.5 kW Coolant Pump 400 V 50 Hz 90W Machine Dimensions 2750 x 1080 x 1370 mm Dqnfzz Net Weight 2020 kg Total Dimensions 2870 x 1180 x 1570 mm Gross Weight 2200 kg Accessories Included: 3-jaw self-centering chuck Ø250 mm / D1-8 4-jaw self-centering chuck Ø300 mm / D1-8 Drive flange Ø350 mm Fixed steady rest Moving steady rest Reduction bushing CM 7 / 4 Fixed tailstock CM 4 Rotary tailstock CM 4 Thread comparator Turret guard Spindle guard Rear splash guard Quick change turret type B LED lamp Cooling system Electromechanical foot brake Bathed carriage gears oil Quick-lock tailstock carriage

Condition: new, plate width 1500 mm plate depth 1500 mm plate height 600 mm weight 2265 kg GERD WOLFF clamping cube 1500 x 1500 x 600 mm Also available in 800 mm version (H1154). If you cannot find your desired size, simply send us an email with the completed PDF form. We can then provide you with a custom plate tailored to your requirements. T-slot size: 38 x 22 Csnfsoob8O T-slot spacing: 140 Number of slots: 13 Edge distance: 120 Weight: 2265 kg Casting quality HT250 Flatness less than 0.12 mm Surface machined according to DIN 876/II Keywords: Clamping cube, Cubic clamping table, Multi-sided clamping, Angle clamping cube, Precision cube, CNC clamping cube, Clamping angle, Machine cube, 90-degree clamping device, Drilling cube, Modular clamping cube, Workpiece positioning, Mounting cube, Fixing cube, Clamping block

Condition: good (used), Year of construction: 2005, Manufacturer: PICOT Type: RCS 210 - 40 Year of construction: 2005 3 rolls driven Central lubrication Digital read out position side rolls Hydraulic opperated Hydraulic drop end Specifications Metric US Standard Roll width 4100 mm Sheet thickness with 3 x top roll Ø 3 mm Sheet thickness with 5 x top roll Ø 4 mm Sheet thickness for bending 3 mm Top roller Ø 210 mm Side roll Ø 210 mm Number of rollers 3 Bending speed 0-5 Number of driven rollers 2 Power output 7.5 kW Dimensions (estimate) length 5500 mm width 1800 mm Height 1800 mm Bsl9Zrstte0 weight 8900 kg Please note: The information on this page has been obtained from the manufacturer to the best of our knowledge and belief. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: good (used), The scope of delivery includes: 56x stacking transport box, used Manufacturer: SSI Schäfer type: 14/6-4 design: recessed grip on both sides color: blue material: polypropylene Outer dimensions LxWxH: 210x150x123mm inner dimensions LxW: 190x123mm Useful height in stack: 110 mm Bewbhoposus Capacity: 2,50 Liter Stackable: yes Weight | Piece: 0,266 kg Remark: These are used stacking transport boxes. There may be scratches, soiling and color defects may be present. Application: The stacking transport boxes are suitable for storing tools, screw materials and other small parts. small parts. General information about the article: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: used, Machine vice, clamping claws, clamping jaws, stable clamping jaw, stable clamping jaw, clamping claws, pull-down clamp, pull-down jaw, side clamp -Manufacturer: Lenzkes, clamping claw clamping jaw -Type: Backe 3 JSG -Clamping jaw: 100 x 50 mm Bsjb883Sxvk -Clamping height: max. 210 mm -Groove width: 32 mm -Dimensions: 255/100/H120 mm -Weight: 10.7 kg

Year of construction: 2008, Condition: good (used), Load 10 kg X 1500 mm, Y 650 mm, Z 1200 mm weight of robot 305 kg, 2490x1505x2125 mm weight of box 110 kg 600x400x1200 mm suitable for injection 2Jxpq9N molding machines: 150-350 tons

Condition: used, Year of construction: 1997, pressure 150 t chamfer lenght 3100 mm distance between columns 2550 mm column arm 405 mm table width 150 mm ajustment speed 200 mm/sec working feed 10.0 mm/sec return speed 120 mm/sec stroke 215 mm dayligth 465 mm table height 960 mm operating pressure 320 bar oil volume 200 l Czfzndpzsm voltage 3x 400 V total power requirement 15.0 KW weight of the machine ca. 9500 kg range L-W-H 3958 x 2350 x 2750 mm well-maintained condition (!!) - in checked condition - machine video - youtube.com/watch?v=jAmMu71Ccxo Equipment: - BEYELER electro-hydraulic CNC press brake - CYBELEC CNC control - model DNC 800 PS * numerical CNC control unit * 2D graphic programming & product display * color screen * tool & program library * clear and logically structured screen pages * display of collisions * swiveling control, front right - CNC-controlled axes (Y1+Y2-X-R-Z1+Z2) - CNC-controlled back stop adjustment (X-axis) - CNC-controlled vertical adjustment of the stop beam (R-axis) - CNC-controlled adjustment of the stop fingers left-right (Z1+Z2) - CNC-controlled lower beam cambering (BEYELER system) - manual Upper tool clamping - manual lower tool clamping - BEYELER hydraulic clamping/folding device (lower tool) - rear protective device (protective grille) - side protective device (protective doors) - various folding/bending tools - 1x freely movable 2-hand/foot control - operating instructions (PDF) + circuit diagram

Condition: excellent (used), Year of construction: 2000, Technical data: Coil max. width: 1550 mm Coil thickness: 0.4 - 2.0 mm Number of straightening rollers: 7 pcs. Diameter of straightening rollers: 110 mm Number of feed rollers: 4 pcs. Longitudinal shear blades: 4 pairs Speed: 20 m/min. consisting of: Decoiler: 5 tons Coil width: 1550 mm hydr. spreader straightening unit slitting shear Cut-to-length shear control panel Dpr82Z condition: very good condition Control system overhaul in 2022

Condition: good (used), Year of construction: 2000, Make: ROUNDO Type: PM2 Year: 2000 incl. 8 changeable spare rolls up to diameter..... mm High production cylinders and tubes Very shortrolling times Djvzvl Very short straight ends and roundness tolerances Less dependence on plate quality than other machines Designed to prebend and roll the plate into a cylinders in one pass and short cycle time. Specifications Metric US Standard Rolling width 1500 mm Rolling thickness 3x toproll Ø 5 mm Top Roll Ø 110 mm Bottom Roll Ø 120 mm Number of rolls 2 Rolling speed 2,7 or 5,5 Dimensions (Estimate) Length 3500 mm Width 2200 mm Height 1900 mm Weight 3200 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Included in delivery are: 10x stacking transport box, used Manufacturer: SSI Schäfer type: 14/6-4 design: recessed grip on both sides color: blue material: polypropylene Outer dimensions LxWxH: 210x150x123mm inner dimensions LxW: 190x123mm Useful height in stack: 110 mm Capacity: 2,50 Liter Zfepyhlf Stackable: yes Weight | Piece: 0,266 kg Remark: These are used stacking transport boxes. There may be scratches, soiling and color defects may be present. Application: The stacking transport boxes are suitable for storing tools, screw materials and other small parts. small parts. General information about the article: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: used, Clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate, test plate, control plate, granite measuring plate, hard stone measuring plate, granite measuring plate -Manufacturer: Planolith, granite measuring plate hard stone measuring plate Size: 2000 x 1500 mm Dpnqej -Accuracy level: O (< 0.012 mm) -T-slot: width 14 mm -Dimensions: 2020/1520/H256 mm -Weight: 2360 kg

Condition: used, plate width 3200 mm plate depth 2000 mm plate height 210 mm weight of the machine ca. / t Clamping plate Dimensions: 3200 x 2000 x 210 mm Dppsun T-slot dimensions: ? x ? x ? (H)

Condition: new, Year of construction: 2024, Functionality: fully functional, sheet thickness steel (max.): 38 mm, roller (top) diameter: 320 mm, roller diameter: 310 mm, overall weight: 12,500 kg, total length: 4,500 mm, total height: 1,740 mm, total width: 2,300 mm, roller (bottom) diameter: 310 mm, bending length: 1,500 mm, working length: 1,500 mm, roller length: 1,550 mm, power: 18.39 kW (25.00 HP), Equipment: documentation/manual, emergency stop, FACCIN HAV 15342 variable three-roll bending machine Electronically controlled, hydraulic three-roll bending machine Technical data: Number of rollers: Three Geometry of the side rollers: variable Working width: 1550 mm Top roller diameter: 320 mm Side roller diameter: 310 mm Pressure force against the top roller: 160 tons Working pressure at nominal force: 250 bar Guaranteed installed power: 18 kW (25 hp) Guaranteed maximum rotation speed: 3.5-7 m/min Guaranteed machine weight: 12,500 kg Length: 4,500 mm Width: 2,300 mm Bjvusgdhp3 Height: 1,700 mm Guaranteed performance: for material with yield strength 260 N/mm² Rolling capacity (full working width) 38 mm Bending capacity (full working width) 20 mm from pipe diameter 1,600 mm Rolling capacity (full working width) 30 mm Bending capacity (full working width) 17 mm from pipe diameter 415 mm Standard equipment: Variable geometry with linear guides for roller movement Extra long folding bearing for increased frame stability Electronic parallelism system EPS Hardened rollers for high wear protection All rollers ground after heat treatment Siemens S7-HMI PLC control system PGS-CLASSIC control system with Siemens touch panel Hitech hydraulic and electrical package Simultaneous rotation and roller movement Safety ripcord with emergency stop and CE certification Central lubrication Water cooling for the hydraulics Cone bending device Prepared for retrofitting of supports and roller conveyors FACCIN Advantage Package AP

Condition: good (used), Year of construction: 1989, Manufacturer: Schaudt Type: E550 N1500 Year of construction: 1989 Specifications: Metric Metric US Standard Center height 180 mm Grinding diameter Ø 360 mm Grinding length 1500 mm Grinding stone dimensions 500 x 203 mm Dpda8V Grinding stone speed 400 rpm Table rotatable 5/7 ° Tailstock 5 Mk Coolant system Yes filter Yes Dimensions (estimate) length 3500 mm width 2100 mm Height 2100 mm weight 5500 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: good (used), Included in delivery are: 28x stacking transport box, used Manufacturer: SSI Schäfer type: 14/6-4 design: recessed grip on both sides color: blue material: polypropylene Outer dimensions LxWxH: 210x150x123mm inner dimensions LxW: 190x123mm Useful height in stack: 110 mm Capacity: 2,50 Liter Stackable: yes Weight | Piece: 0,266 kg Remark: These are used stacking transport boxes. Dlvwll There may be scratches, soiling and color defects may be present. Application: The stacking transport boxes are suitable for storing tools, screw materials and other small parts. small parts. General information about the article: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: good (used), The scope of delivery includes: 01x stacking transport box, used Manufacturer: SSI Schäfer type: 14/6-4 design: recessed grip on both sides color: blue material: polypropylene Outer dimensions LxWxH: 210x150x123mm inner dimensions LxW: 190x123mm Useful height in stack: 110 mm Capacity: 2,50 Liter Stackable: yes Weight | Piece: 0,266 kg Remark: These are used stacking transport boxes. There may be scratches, soiling and color defects may be present. Application: The stacking transport boxes are suitable for storing D7Rvk8W tools, screw materials and other small parts. small parts. General information about the article: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: good (used), The scope of delivery includes: 261x stacking transport box, used Manufacturer: SSI Schäfer type: 14/6-4 design: recessed grip on both sides color: blue material: polypropylene Bewa97Cwgkb Outer dimensions LxWxH: 210x150x123mm inner dimensions LxW: 190x123mm Useful height in stack: 110 mm Capacity: 2,50 Liter Stackable: yes Weight | Piece: 0,266 kg Weight / pallet: approx. 95,00 kg Remark: These are used stacking transport boxes. There may be scratches, soiling and color color defects may be present. Application: The stacking transport boxes are suitable for storing tools, screw materials and other small parts. small parts. General information about the article: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: good (used), The scope of delivery includes: 1.044x stacking transport box, used Manufacturer: SSI Schäfer type: 14/6-4 design: recessed grip on both sides color: blue material: polypropylene Outer dimensions LxWxH: 210x150x123mm inner dimensions LxW: 190x123mm Useful height in stack: 110 mm Capacity: 2,50 Liter Stackable: yes Weight | Piece: 0,266 kg Weight / pallet: approx. 95,00 kg Weight / 1,044 pcs.: approx. 380.00 kg Remark: These are used stacking transport boxes. There may be scratches, dirt and color defects. color defects may be present. Csuu7P9Eey Application: The stacking transport boxes are suitable for storing tools, screw materials and other small parts. small parts. General information about the article: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.