Automatic line

5 assi Breton JOYCUT FB-NC 500

Condition: excellent (used), Year of construction: 2021, operating hours: 3,300 h, functionality: fully functional, machine/vehicle number: ADKL2001, clamping force: 14,000 kN, screw diameter: 120 mm, clearance between the columns: 1,450 mm, column diameter: 240 mm, displacement volume: 7,351 cm³, injection pressure: 1,200 bar, injection weight: 6,983 g, mold height (min.): 650 mm, ejector force: 350,000 N, ejector stroke: 380 mm, opening stroke: 1,450 mm, plate length: 2,950 mm, plate width: 2,000 mm, plate height: 2,000 mm, total length: 14,100 mm, total width: 3,400 mm, total height: 3,600 mm, overall weight: 75,000 kg, heating capacity: 60 kW (81.58 HP), pressure: 178 bar, number of injections: 1, pump power: 204,000 W, power: 266 kW (361.66 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 520 A, Equipment: documentation/manual, The machine has seen limited use and is in very good condition. It has been well maintained. The machine only processes ABS and PP. It features a Beckhoff control system. The machine is equipped with extensive additional equipment, including 3 pneumatic valves, two hydraulic valves, a servo valve for table movement hydraulics, 32 tool heating zones, a water manifold with 8 zones, a screw heating element insulation, a hydraulic screw rotation system for torpedo replacement, a torpedo with a locking system, an interchangeable centering ring, a Euro-map for the robot, a door with automatic opening via an electric motor, and an electrical cabinet with sockets. Additionally, water blocks are installed on both the moving and stationary tables, each with 8 connections. Furthermore, a set of spare parts is included, such as a complete torpedo, a screw nozzle, heaters, temperature probes, and specific hydraulic seals, as well as a self-filtration filter and a torpedo wrench, and auxiliary ejector rods. A Wemo robot can also be sold with the machine; while it is not the subject of this advertisement, it can be purchased separately and added to the machine. It was used with the machine and is adapted for it. Dkodpozna T Rsfx Akmou

Condition: excellent (used), Year of construction: 2019, operating hours: 18,800 h, functionality: fully functional, machine/vehicle number: AAKJ4001, clamping force: 12,000 kN, screw diameter: 110 mm, clearance between the columns: 1,250 mm, column diameter: 220 mm, displacement volume: 5,701 cm³, injection pressure: 1,700 bar, injection weight: 5,244 g, mold height (min.): 500 mm, ejector force: 350,000 N, ejector stroke: 350 mm, opening stroke: 1,300 mm, plate length: 2,610 mm, plate width: 1,800 mm, plate height: 1,800 mm, total length: 13,200 mm, total width: 3,400 mm, total height: 3,500 mm, overall weight: 63,000 kg, heating capacity: 55 kW (74.78 HP), pressure: 178 bar, number of injections: 1, pump power: 204,000 W, power: 260 kW (353.50 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 512 A, Equipment: documentation/manual, The machine has been used sparingly and is in very good condition. It has been well-maintained. The machine only processes ABS and PP. The machine’s control system is B&R. The machine is equipped with numerous accessories, including 3 air valves, two hydraulic valves, a servo valve for table movement hydraulics, 22 tool heating zones, a water manifold with 8 zones, screw heater insulation, hydraulic screw rotation for torpedo replacement, a torpedo with a locking system, an interchangeable centering ring, a euro-map for the robot, a door with automatic opening, and an electrical cabinet with sockets. The machine also has water blocks on both the moving and stationary tables, each with 8 connections. In addition, several spare parts are included, such as a complete torpedo, a screw nozzle, heaters, temperature sensors, and specific seals for the hydraulics, as well as a self-filtration filter and a torpedo wrench and auxiliary ejector rods. A Wemo robot can also be sold with the machine; while it is not part of this listing, it can be purchased separately and added to the machine later. It was used with the machine and is adapted for it. Dedpfsznbqqox Akmeku

Condition: used, Potato specialties oven suitable for thermal oil heating infeed height: ± 1.000 mm outfeed height: ± 1.000 mm Dkjdpfjzldxfox Akmeu suitable for fire protection with seperate infeed belt oil circulation system net belt length: ± 9.000 mm net belt width: ± 650 mm adjustable speed lifting unit dimensions (l x w x h): ± 12.720 x 1.625 x 3.455 mm steam connection heated drip tray 0.5 - max 3 bar. oil level check VEGA central air extraction with telescopic chimney Infeed belt Type TB-D 2100-6.5 Dimensions: 2,100 x 650 mm 0.37 kW/1.1A External tubes heat exchanger “Van de Walle Apparatenbouw” Type Florigo WW050 BT Year of manufacture 08/2013 500 kW Type Van de Walle D323-V012-2000 Casing: Working pressure 6 bar / 290°C / 85L Tube: Working pressure 6 bar / 220 °C / 94L Test pressure 9 bar Drum filter Type FT750-3 Drum dia. 750 mm Drum dia. 300 mm 0.37 kW Drum 1.1 A screw 0.12 kW / 0.41 A Capacity 94 m³/h Blower 0.25 kW / 0.8 A Fryer Product belt 0.75 kW / 1.9 A Fryer top belt 0.75 kW / 1.9 A Lifting device 1.1 kW / 2.6 A Drum filter / Waste screw 0.12 kW / 0.41 A Fryer main pump 15 kW / 29.3 A Fryer auxiliary pump 0.55 kW / 1.5 A Fryer drip tray pump 0.55 kW / 1.5 A

Year of construction: 1988, condition: used, functionality: fully functional, Year: 1988 Material: LDPE/HDPE Winder width: 1100 mm, double winder Dkedpszi Urwofx Akmju Die diameter: 150, 100, 80, 50 Screw diameter: 60 Additional equipment: corona treatment + gravimetric system Maximum machine capacity: 90 kg The machine is in very good condition and can be seen in operation!

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: BG56, CMS YPSOS BG56 – Vertical CNC Glass Processing Centre with LV2800 Vertical Glass Washing Machine Vertical CMS Brembana YPSOS BG56 CNC glass processing centre equipped with two front working spindles and one rear spindle. The machine has two tool magazines. The front magazine has a capacity of 13 ISO40 tools, while the rear magazine has a capacity of 6 ISO20 tools. The offer also includes a Stefiglass LV2800 6br 3/20+PW vertical glass washing machine. The washer is equipped with six brushes, pre-washing, washing and drying sections, as well as soft brushes suitable for Low-E glass. Its construction is made of AISI 304 stainless steel. Key Specifications of the CNC Centre: - Manufacturer: CMS Brembana - Model: Ypsos - Serial number: BG56 - Year of manufacture: 2022 - Total weight: 12,000 kg - Power supply: 400 Vac +10%/-15%, 60 Hz, three-phase - Compressed air pressure: 6 bar - Compressed air connection: 1/2" - Clean water consumption: 30 l/min - Water pressure: 3–6 bar - Maximum glass size: 2,800 × 4,500 mm - Minimum glass size: 270 × 420 mm - Glass thickness: 3–30 mm - Front tool magazine: 13 positions, ISO40 - Rear tool magazine: 6 positions, ISO20 Vertical Glass Washing Machine: - Manufacturer: Stefiglass - Model: LV2800 6br 3/20+PW - Serial number: LV2428 - Year of manufacture: 2022 Dkjdpfx Akjz Il Rfomou - Construction: AISI 304 stainless steel - Minimum glass height: 150 mm - Minimum glass length: 370 mm - Glass thickness for washing: 3–20 mm - Washing speed: 1–5 m/min - Number of brushes: 6 - Pre-washing, washing and drying sections - Soft brushes for Low-E glass A set of spare parts is included with the machines, together with an approximate valuation of the parts.