Turningroll, roller bed, rotator 100t

A&N Pr 100-150

Mileage: 100 km, fuel type: diesel, fuel: diesel, gearing type: mechanical, Condition: used, Interior: black E2Pulz3 Number of keys: 1

Condition: good (used), Here we offer you an S & A test chamber for parametric testing. S & A test chamber for parametric testing Temperature range: 55°C to +150°C Stability: ± 0.1 ° C including the effects of mains voltage, ambient temperature and ageing. temperature and ageing Cooling medium: Water-cooled mechanical cooling Chamber can be controlled remotely via IEEE bus or RS232C interface Weight approx. 250 kg L3Mw7 Type: 4220A Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), Year of construction: 2019, Functionality: fully functional, machine/vehicle number: AST100SHE - 2200338429, cooling capacity: 215 kW (292.32 HP), type of input current: three-phase, type of cooling: water, overall weight: 2,160 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -20 °C, input voltage: 400 V, total width: 2,188 mm, total length: 3,495 mm, total height: 2,150 mm, warranty duration: 3 months, Process chiller / air-cooled chiller, Type: - Aries TECH AST 100 SHE - 215 kW Chillers, MTA S.p.A. The Aries TECH AST 100 SHE are compact chillers suitable for outdoor installation (from -20°C to +48°C) with shell and tube evaporator, four scroll compressors, compressor shut-off valves, crankcase heater, phase monitoring, P2 pump, 400 liter tank, electric antifreeze heater, condenser filter and control and switch cabinet. Cooling capacity (kW): 215 Cold water temp. outlet/ inlet (°C): 7 / 12 Volume flow (m³/h): 36,9 Available pump pressure Pump pressure (bar): 2,6 Ambient temperature (°C): 32 Refrigerant circuit: Refrigerant R 410A Refrigeration circuits (number): 2 Compressors (number): 4 Capacity levels (%): 0-25-50-75-100 Electrical data: Dpkma2 Voltage V 400, frequency Hz 50, phases Ph 3, Max. Power consumption (kW): 98 Max. Current (A): 160 Starting current circuit (A): 351.1 Protection class: IP54 Dimensions: Length (mm): 3495, width mm 2188, height mm 2150 Weight (kg): 2160 (transport weight) Connection DN 100 (Vitaulic) Serial no.: 2200338429 Year of construction 2019 Condition: Visually 2, technically ok (used appliance) Price: on request in Euro (plus VAT ex Nettetal) - 3 months warranty Used machines may have optical defects due to their use. (Subject to technical changes and prior sale!) Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: excellent (used), Year of construction: 1996, Functionality: fully functional, machine/vehicle number: 22, power: 25 kW (33.99 HP), SPECIAL OVEN USED VERY LITTLE Uo28Fsylax MAXIMUM TEMPERATURE 950 DEGREES

Condition: good (used), Year of construction: 2018, Functionality: fully functional, machine/vehicle number: 2018000607, Digatron BNT-ME Flexible test system for battery modules up to 60 volts The Digatron BNT-ME was developed to test battery modules in the voltage range from 0 to 60 volts and up to 250 amps. The device is particularly impressive when testing traction batteries, components for the 48-volt vehicle electrical system, batteries for small BEVs or traction batteries. Ideal for laboratories that want to rely on a functional solution with "Made in Germany" quality. C0Hgsft0Ze

Year of construction: 2024, Condition: new, For Sale: Mobile Vertical Shaft Impact Crusher - Contact Us 24/7 The CONSTMACH V-70 Mobile Vertical Shaft Impact Crusher offers a superior solution to industry needs, making a difference in the production of fine materials with excellent cubic shape. This mobile crusher, particularly ideal for mobile limestone crushing operations, is designed to produce granule sizes ranging from 0 to 5 mm, ensuring high-quality sand production for various projects. The V-70 Mobile Crusher stands out with its advanced design and engineering expertise. Its long-lasting components and superior craftsmanship combine efficiency and durability. With a maximum feed size of 35 mm, this unit operates at a production capacity of 100-150 tph. Equipped with a feeding height of 3.8 meters and a vibrating screen in the VSI crusher main configuration, it offers high performance and efficiency. Operating with a total motor power of 185 kW and requiring a 400 kVA electric generator, the V-70 maximizes energy efficiency. Weighing 28 tons and measuring 14 x 3 x 4.2 meters, this mobile crusher features a wheeled chassis with hydraulic opening legs, making it easily transportable and quick to install. The CONSTMACH V-70 is an excellent choice for those seeking quality and reliability in mobile crushing solutions. With its modern technology and flexible structure, it provides the ideal solution for high-quality sand production. The superior features and user-friendly design of the V-70 will make a difference in your projects and optimize your production processes. Dpp3Kn V-70 Mobile Vertical Shaft Impact Crusher Technical Specifications Production Capacity: 100-150 tph Maximum Feed Size: 35 mm Feeding Height: 3.8 meters Main Configuration: VSI Crusher + Vibrating Screen Total Motor Power: 185 kW Electric Generator Requirement: 400 kVA Plant Weight: 28 Tons Plant Dimensions: 14(L) x 3(W) x 4.2(H) meters Dppozt Chassis Type: Single chassis on wheels equipped with hydraulic opening legs.

Year of construction: 2000, Condition: ready for operation (used), A complete Hosokawa mill for processing polyester resin lumps is available. Complete plant: Feed material: polyester resin, max. feed grain size (dry): 800mm/600mm/20mm-30mm, fineness: below 1.5mm, round hole diameter: 15mm, plant capacity: approx. 3000kg/h, analysis method: Alpine air jet screen 200 LS-N. 1) Alpine single-shaft shredder type A 1500P, feed hopper opening: 2030mm/1440mm, feed hopper volume: 2.5m³, working width: 1500mm, knife circle: 300mm, rotor speed: 100rpm, motor power: 37kW, machine dimensions X/Y/Z: approx. 2100mm/2200mm/2300mm, weight: approx. 3500kg. 2) Automatic dedusting filter AE 48 L, filter surface: 42m², filter bags: Needle felt 550g/m². 3) Alpine Compact-Line granulator 45/100 CL, cutting tool rows: 4, min. hole width: 3mm, required power: 55kW. Including extraction system, conveyor system and accessories/peripheral equipment. Documentation available. On-site inspection is possible. Cvtxr0Yolw

Condition: new, Schmersal MZM 100 ST2-SD2PREM-A solenoid interlock,unused in opened original packaging, 100% functional, scope of delivery according to photos Fda0Dbidp

Condition: new, The KP-A series consists of powerful hydraulic presses with portal frames, which are built completely in Europe using high-quality components from reputable suppliers and used for deep drawing, forming, and notching processes. The possible force ranges from 40 to 400 tons. The entire series has large ram plates on the cylinder and work table with clamping flutes for mounting tools and accessories. Mobile 2-hand operation guarantees safety, and the travel distance is defined with adjustable limit switches. We also offer customized solutions that are based on individual customer requirements. Bdv8Qmth

Condition: new, Year of construction: 2024, neu 2024 7305 prompt, Zwischenverkauf v Italien 46400 € 941.92 € 1 100 to 500 mm 700 x 350 mm 800 x 600 mm 500 mm 300 mm 25 mm/s 4 mm/s 4 kW 1900 mm 1200 mm 2600 mm 2100 kg 2-fold round guidance table and ram with T-slots 2 hand operation Siemens PLC manometer users manual incl. pressure switch OPTIONS: time of delivery with options 2 - 3 months from order 4-fold round guidings € 1.900,- Light barrier € 7.300,- Siemens control for programming of stroke and press time € 4.000,- Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € 9.000,- Working hour counter € 400,- Stroke counter € 400,- Deompression valve € Dqosbn 700,- Oil cooler with decompreission valve € 3.700,- Pressure switch € incl.

Condition: used, Year of construction: 1995, Functionality: fully functional, Equipment: type plate available, AE 100 liter reactor vessel, enameled steel, manufacturer Estrella AG, Switzerland. Year of construction 1995, total capacity 135 liters, double jacket with 40 liter capacity. Perm. operating pressure vessel -1/+6 bar, perm. operating pressure double jacket -1/+6 bar. Perm. operating temperature -25/+200°C, enamel color blue, impeller agitator, mechanical seal. Hand hole, sight glass lamp, 400 V EX drive, bottom drain valve, baffle with PT 100 temperature probe. For questions and further information please contact us, we will be happy to answer your questions, Cycron GmbH Bdv8Ri7P

Year of construction: 2012, operating hours: 2,688 h, Condition: used, Field of application: Construction Empty weight: 1.650 kg Make of engine: Kubota V3800-T Capacity: 8,5 m³/m Compressor type: Screw compressors Hfb9Syclr Working pressure: 10 bar Please contact Sales Department for more information

Condition: as good as new (ex-display), HPK-A series are space efficient presses with three-sided access. The machines are completely built in Europe using high quality components from renown suppliers to guarantee a high reliability and lasting value. These models are highly versatile, handling with ease many applications, from punching, straightening to forming and drawing, thus being present in most industry segments. Additionally, we offer tailored solutions based on specific customer requirements. Cx0Zmqax

Condition: new, neu ca. 14 - 16 Wochen ab Auf Italien 52400 € 1053.24 € 150 to fix 835 mm 500 mm 700 mm 1050 mm 20 mm/s 10 mm/s 3 mm/s 1000x700 mm 1000x400 mm 2200 mm 1000 mm 2700 mm 4100 kg Hydraulic multifunction workshop press for pressing and straightening and optional bending Version A (automatik): with 2-hand panel with limit micron switch for up/downstroke stop, automatic piston retraction, Siemens CPU Version S (semiautomatik): 2-hand function by hand lever and pushbutton, limit micron switch for up/downstroke stop Standardmodel for pressing and straightening: table with t-sloats and straightening punch Cy2Pxczbdy OPTIONS: Bending accessorie with tool holder, upper tool, dies with 4 slots and 2 frontal support arms Mobile truck for quick assembly/disassembly of bending unit Siemens control Pressure switch Heat exchanger Piece counter Timer Plate supports for the rear side Safety light guard ALTERNATIVE: Version S (semiautomatik) € 42.800,00

Year of construction: 2008, operating hours: 3,496 h, Condition: used, Field of application: Construction Empty weight: 1.600 kg Dkyozh Make of engine: Kubota V3800-DI-T-ES02 Capacity: 6,4 m³/m Compressor type: Screw compressors Transport dimensions (LxWxH): 3.3x1.7x1.5 Working pressure: 14 bar Please contact Sales Department for more information

Condition: new, The KP-A series consists of powerful hydraulic presses with portal frames, which are built completely in Europe using high-quality components from reputable suppliers and used for deep drawing, forming, and notching processes. The possible force ranges from 40 to 400 tons. The entire series has large ram plates on the cylinder and work table with clamping flutes for mounting tools and accessories. Mobile 2-hand operation guarantees safety, and the travel distance is defined with adjustable limit switches. We also offer customized solutions that are based on individual customer requirements. Napjylzmi2

Condition: new, neu ca. 14 - 16 Wochen ab Auf Italien 36800 € 747.04 € 100 to fix 835 mm 500 mm 780 mm 1050 mm 25 mm/s 10 mm/s 4 mm/s 800 x 600 mm 700 x 350 mm 1800 mm 1000 mm 2400 mm 2050 kg Hydraulic multifunction workshop press for pressing and straightening and optional bending Version A (automatik): with 2-hand panel with limit micron switch for up/downstroke stop, automatic piston retraction, Siemens CPU Version S (semiautomatik): 2-hand function by hand lever and pushbutton, limit micron switch for up/downstroke stop Standardmodel for pressing and straightening: table with t-sloats and straightening punch OPTIONS: Bending accessorie with tool holder, upper tool, dies with 4 slots and 2 frontal support arms Mobile truck for quick assembly/disassembly of bending unit Siemens control Pressure switch Heat exchanger Piece counter Dpr2Gt Timer Plate supports for the rear side Safety light guard ALTERNATIVE: Version S (semiautomatik) € 27.600,00

Year of construction: 2013, operating hours: 617 h, Condition: used, Field of application: Construction Empty weight: 1.650 kg C9Ytgw3 Make of engine: Kubota V3800-T Capacity: 10,6 m³/m Compressor type: Screw compressors Transport dimensions (LxWxH): 3.35x1.73x1.5 Working pressure: 7 bar Please contact Sales Department for more information

Condition: new, 100.06 running meters of shelving, 60cm deep , Workshop shelving , Storage shelving , Manual storage , Push-in shelving , Small parts storage Data : - Height : approx. 200 cm - Depth : approx. 60 cm - Length : approx. 100.06 running meters Shelf offer 100,06 running meters consisting of: - 0101 x upright approx. 200 x 60 cm, disassembled (incl. 2 x base & 2 x cover cap). - 0500 x shelf approx. 100 x 60 cm. - 2000 x shelf holder. - 0101 x Diagonal 1176 mm ( for crossing ). - 0101 x turnbuckle ( for intersection ). - Manufacturer: META CLIP. - Load: 150 kg per shelf, with evenly distributed load. - Levels: 5 x storage levels. - Surface: sendzimir galvanized. - New from stock. - Made in Germany. - 100% quality at the best price. We can pre-assemble the frames for a small surcharge of 2€/net per piece. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 11.106,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : Cjpxfiu0Fo If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: excellent (used), Year of construction: 2016, Functionality: fully functional, The line include the following machines: The machine for cutting the stems from picked and dried flowers OGK 1003-A Belt conveyor VARIO 404 Seed separator DS-2001 Belt conveyor VARIO 304 Vibration separator ST I VIBRO active with 2pcs vibration motor and with a sieve Contorl panel 308 KONTROL Magnet fi 32 Electric regulator Belt conveyor 202 with changing speed Air selector (blows dirt out of chamomile) Belt conveyor VARIO 305, metal detector magnet Xd2Ol7Ei Our offered price is around 30% of the original purchasing price. For more information please contact us.

Condition: used, Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Sempress type: ADO-MAE-0-50/1000 Fh7Bkwd -Flange: Ø 40 mm -Thread: M16 x 1.5 -Stroke: 980 mm -Dimensions: 1180/65/65 mm -Weight: 8.1 kg

Condition: new, 100.06 running meters of shelving, 40cm deep , Workshop shelving , Storage shelving , Large shelving , Manual storage , Shelving , Small parts storage , Data : - Height : approx. 200 cm - Depth : approx. 40 cm - Length : approx. 100.06 running meters Shelf offer 100.06 running meters consisting of: - 0101 x upright approx. 200 x 40 cm, disassembled (incl. 2 x base & 2 x cover cap). - 0500 x shelf approx. 100 x 40 cm. - 2000 x shelf holder. - 0101 x Diagonal 1176 mm ( for crossing ). - 0101 x turnbuckle ( for intersection ). - Manufacturer: META CLIP. - Load: 150 kg per shelf, with evenly distributed load. - Levels: 5 x storage levels. - Surface: sendzimir galvanized. - New from stock. - Made in Germany. - 100% quality at the best price. We can pre-assemble the frames for a small surcharge of 2€/net per piece. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 9.336,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery can be carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation. Dqlgy7

Condition: excellent (used), Kemper SP 150 A stainless steel boiler 6 pieces available on rollers Boiler dimensions diameter 1 m boiler height 50 cm and complete height 88 cm 7N0H0Aalf for further questions please call mobile or send email Many thanks in advance,

Condition: excellent (used), Year of construction: 2018, Functionality: fully functional, CNC NESTING CENTER "SCHREINERTRAUM" with HORIZONTAL DRILLING DIRECTLY IN THE NEST! THE FULL PRODUCTION PROGRAM WITH MOBYLIFT PANEL LOADER AND ALL THE TOOLS YOU NEED TO START PRODUCTION IMMEDIATELY! Working range: X-axis 3,086 mm Y-axis 2,185 mm Z-axis 150 mm Work table: Multifunctional table made of aluminum Stops for "A" worktable: 4 pcs. Stops for "D" worktable: 4 pcs. Pendulum table design: Allows machining on one side side, while occupying the other side 2 vacuum pumps 250 cbm/h each Vacuum for half or full work table Drilling unit F18L: 12 vertical drilling spindles vertical Spindle pitch 32 mm 2+2 horizontal drilling spindles in X 1+1 horizontal drilling spindles in Y 1 grooving saw unit diam. 125 mm fixed in X Milling spindle 9.5 KW HSK 63F Speed 1,500 - 24,000 rpm Right / left rotation Blow nozzle system on milling spindle for tool cooling during machining during machining Interpolating vector axis for autonomous positioning of angular gears in the milling spindle (0-360 degrees in X/Y plane) Lateral tool magazine for automatic tool change in the milling spindle 13 tool slots for tools and angular gears with max. total length 160 mm Lateral PICK-UP tool changer for tools max. diameter 160 mm Further equipment: - Automatic central lubrication - Sensor for automatic tool length measurement - Additional hardware key for Maestro CNC (for USB slot) - Slide for the panel outfeed on the left-hand side attached to the machine portal, incl. suction device - Label printer - Clamex unit - Milling arbor for CLAMEX P - Adapter unit for CLAMEX Control unit: Control panel "eye-M" 2018 Xilog Maestro machine interface Rectangular nesting module for Xilog Hardware key for Xilog Nesting (for USB slot) "TECPAD wired" remote control with 7" touchscreen SOFTWARE: Beixsby MULTICENTER ST-PAKET consisting of: Nesting the parts from the panel. This includes Milling cut-outs for horizontal holes are taken into account incl. horizontal drilling unit (1-spindle) for milling spindle/ vector axis CAD Line Software Multi Center Studio (MCS) is a software for nesting and optimizing existing Maestro programs CAD Line Software man. Printer license for use Label printing CAD Line Software CLAMEX - Processing of special connections as an extension for MCS CAD Line Mulit Center - Studio "material-dependent milling strategies": A strategy can be assigned to each material in the panel store. MCS then controls the cutting out parts automatically according to the material or a stored strategy ST license horizontal drilling System complete with existing tool set and HSK 63F tool holders Mobile battery-operated vacuum lifter "MOBYLIFT" TC-120 AM-SL Lifting height 0 - 160 cm Tilt angle front rear 100 degrees Swivel angle head joint 90 degrees on both sides

Mileage: 52,174 km, power: 110 kW (149.56 HP), first registration: 03/2002, overall weight: 7,490 kg, fuel type: diesel, color: white, axe configuration: 4x2, maximum load weight: 2,580 kg, empty load weight: 4,910 kg, driver cabin: other, gearing type: mechanical, emission class: euro3, suspension: steel, loading space width: 2,500 mm, loading space length: 7,100 mm, loading space height: 2,800 mm, Condition: used, total length: 2,550 mm, total width: 3,850 mm, front tire size: 215/75R17.5 126/124M, rear tire size: 215/75R17.5 126/124M, number of seats: 2, Equipment: ABS, power assisted steering, tail-lift, Vehicle location: Bovenden, registration number house, radio, switch 5, ABS (anti-lock braking system), leaf suspension, tarpaulin and bows, power steering, tail lift aluminum, upright, yellow environmental badge Dqr8W7 with tail lift Hubfix 1000 K 700 ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .