High-Speed Press

AIDA HMX-300(1)

Year of construction: 1985, condition: reconditioned (used), Technical Details : Wire Dimeter range- 4-12mm Fpedpfxsh In The Afuen Gscxckebw Run out table - 4m Speed -80' m/min. Reconstruction- 2022

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SF100s.01.26, screw diameter: 200 mm, total length: 3,200 mm, total height: 2,200 mm, overall weight: 400 kg, heating capacity: 10 kW (13.60 HP), pressure: 2 bar, type of input current: three-phase, input frequency: 50 Hz, input voltage: 380 V, warranty duration: 24 months, Machine for cheese streching, dozing, mozarella and other. Fpedpfxst I Dxwo Afuen

Condition: good (used), Year of construction: 2011, machine/vehicle number: 2212.287, Automatic panelsaw Schelling Typ:FH 6 430 Maskin nr:221.287 År:2011 Panel beam saw Schelling with automatic, rear-feed,lifting table. For sawing board material, chipboard, MDF, Plywood, Board, Laminate etc. Techn info: Software MCS Evolution 2.0, SPS, Soft-SPS-Siemens WinAC Operating system WINDOWS XP PC with keyboard and mouse TFT monitor 17" Cutting length 4300mm, automatic detection of the start of the plate Cutting width 4300mm Machine accuracy of the cut length 3m +-0.1mm Positioning accuracy measured at input +-0.1mm Max diameter saw blade 460mm, spindle 30mm Pre-scoring blade 200mm, spindle 20mm motor operation is set from the control console Max panel thickness 120mm Panel stack aligner Main saw blade motor 27kw Saw blade over table 135mm Safety curtain Air cushion table with 3pcs air ball nozzles, radial ventilator fan Table sizes 2650x850mm 620x850mm 2650x2550mm Pressure beam with automatic adjustment of pressure to cut length and package height Package straightener before and after the pressure beam Max package height 120mm (incl. sum of curvature and board thickness tolerance) Pusher with 12 grippers Max clamp opening (gripper) 133mm Min-max force package straightener 400/2000N Speed saw carriage forward 6-150m/min Speed saw carriage back 150m/min Forward feed speed (pusher) up to 25m/min (according to EC Europa EN1870-13) other countries 80m/min Speed feeding back up to 80m/min Push-off device 3 pcs Lift table length x width 4350x2550mm Hydraulic unit Standard version 1600mm lifting height 1.25/2.5m/min raising speed, 1.25/5m/min lowering speed Maximum load 1200 kg/m2 total 9 tons Roller track driven rollers, frequency controlled for stack on lifting table 4100x2600mm Max stack weight 6500 kg Max stack length 1060mm Slots for forklift 4 pcs, distance in the middle 1200mm, slot width 300mm Light curtain for personal protection Roller conveyor driven for package frequency controlled input to lifting table left 5600x2600mm max load 6500kg Roller conveyor driven for packages frequency controlled input to lifting table right 5600x2600mm max load 6500kg Slots for forklift 2 pcs, center distance 900mm, slot width 400mm 2 positioning stops with roller for stack alignment Light curtain (double beam) for personal protection Roller table after saw depth 4300mm, free-running ployamide rollers Angle stop at the rolling table Infeed guide two-lane (beam length 7200mm) 2-sided hardened precision guides rack and pinion drive, two-sided Input carriage (pusher) gear rack servo drive, non-contact measuring system Gripper, (scissor clamps) in pusher 12 pcs Automatic adaptation of the clamping force to the package height (progressive clamping force) can be set to 0 Pusher for panels thickness greater than 6mm,material thinner than 6mm is fed manually Central cleaning system feed trough (pusher) Compressed air 6-8 bar, approx. 1600l/min Power 38 kw, 70 A. 3x400 volts, 50 Hz, operating voltage 24 VDC Dust extraction 4000m/h, air speed 30m/s Fpsdstk It Sjpfx Afujn Diameter connection 80mm (angle connection), 120mm /pressure beam), 150mm (sawdust channel) Total setup area without driven roller conveyors including protective grid approx: 11650x7300mm Driven roller tracks left-right 5500+5500mm Stock no: 2002125BXACEO Subject to incorrect technical data presented

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : BT40 - Spindle power : 36.5 [kW] Fjdpfx Aoy Tzc Hefuopn - Spindle speeds : 12000 [rpm] - B Rotary Axis : 90 [°] (+/-) LINEAR AXES - Travels on X/Y/Z axes : 1525 / 660 / 610 [mm] - Rapid traverses rates (X/Y/Z) : 32 / 32 / 24 [mm/min] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 40 TABLE - Table dimensions : 1680 x 660 [mm] - Distance table / spindle nose (min./max.) : 12.7 - 622.3 [mm] - Maximum weight upon table : 1360 [kg] - Diameter of the C-type rotary table : 600 [mm] - Travel : 360 [°] - Maximum load on the rotary table : 500 [kg] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 69 [kVA] WEIGHT & DIMENSIONS - Machine weight : 9.800 [kg] EQUIPMENT - CNC : WinMax / MAX5 - Electronic handwheel - Coolant tank * with high-pressure pump - Coolant through spindle - Chips conveyor - Spindle cooling unit - Tool probe

Year of construction: 2005, condition: excellent (used), KLIKLOK CERTIWRAP C-80 ID.NO. 2505 Kliklok HST Certiwrap C-80 sleeve machine for putting cardboard packaging around products. 3x different tools included & associated Nordson glue set year mod 2005. Fodpfeki Tlqjx Afuopn No. 1. 160 x 388 mm. No. 2. 160 x 407 mm No. 3. 422 x 162 mm dimensions 470 x 130 H 170 cm.

Condition: excellent (used), functionality: fully functional, Alfa Laval / Tetra Pak Cream Pasteurization Line Alfa Laval / Tetra Pak Cream Pasteurization Line | Piston Pump, Buffer Tank, Flowmeter, Pasteurizer Complete cream pasteurization line from renowned manufacturers Alfa Laval and Tetra Pak, equipped with high-quality pumps, valves, flowmeters, and control cabinets. The line is designed for hygienic and efficient cream pasteurization in the dairy industry. Capacity: 35,000 liters/hour Main components of the line: 1. Circumferential Piston Pump Manufacturer: Alfa Laval Type: DURACIRC 73 Serial Number: E256143 Year of Manufacture: 2021 Dimensions: 1600 × 600 × 800 mm Included: various valves and stainless steel filter housing 2. Stainless Steel Buffer Tank Tank dimensions: Ø 1100 × 1700 mm Total dimensions: Ø 1200 × 2900 mm 3. Alfa Laval Valves, Type: Unique SSV (6 pcs.) High-quality single seat valves for food applications 4. Flowmeter Manufacturer: Endress + Hauser Model: Promag P / Promag P Dimensions: 200 × 200 × 350 mm High-precision flow measurement for food-grade liquids 5. Centrifugal Pump Manufacturer: LKM Type: LKH 20/155 Power: 5.5 kW Production Number: 20-02319 Dimensions: 700 × 380 × 400 mm Stainless steel construction, suitable for CIP operation 6. Valve Manufacturer: Armaturen AG Type: MA9.31A6 5S Po Dimensions: 600 × 400 × 400 mm 7. Cream Pasteurizer Manufacturer: Alfa Laval / Tetra Pak Type: C10-SH Serial Number: 30104-38526 Year of Manufacture: 2003 Capacity: 1311 liters Operating parameters: Operating pressure (PS): 0 / 20.0 bar Test pressure (PT): 28.6 bar Temperature range (TS): 0 / 130 °C Dimensions: 5000 × 800 × 2200 mm High-efficiency heat exchanger system ensuring stable pasteurization 8. Centrifugal Pump Manufacturer: Pomac Type: CP29068/230 X 15 Serial Number: 22 818 Year of Manufacture: 12/2011 Capacity: 45 m³/h Power: 15.0 kW Dimensions: 950 × 400 × 500 mm Fedpoxtu Ugefx Afujpn 9. Nocado Valves (5 pcs.) Process valves for food applications 10. Control Cabinets Manufacturer: Eldon and IPBE Dimensions: 400 × 230 × 770 mm 1000 × 300 × 1000 mm The Alfa Laval / Tetra Pak Cream Pasteurization Line is a complete industrial solution with a capacity of up to 35,000 l/h, designed for high hygiene, precise process parameter control, and maximum reliability. Ideal for dairies, cream and milk fat producers.

Condition: used, Year of construction: 2004, functionality: unexamined, EPAL Production line is for sale in Latvia Consists of: Fpedpewgacrofx Afujn Wood lengthening machine - KALLFASS PFA-250 Pallet leg lengthening machine - Bohm & Kruse Pallet top nailing machine - ENGELER Pallet turning machine Chain conveyor Pallet nailing machine - Bohm & Kruse Marking/corner cutting machine - Bohm & Kruse, Type 3/24/1500 Milling machine Roller conveyor Stacker - ENGELER ELEWFTORSTAPLER

Condition: excellent (used), Year of construction: 2007, X-axis: 1,600 mm Fpsdjzcppljpfx Afujn Y-axis: 800 mm Z-axis: 740 mm Max. workpiece size: 1,600 x 700 mm Max. table load: 1,200 kg Spindle speed: 12,000 rpm Tool holder: SK40 Tool changer: 24 positions Control system: HAAS Version M15 Includes 4th and 5th axes, ORIGINAL HAAS Includes chip conveyor Includes documentation

Condition: used, functionality: fully functional, Fully automatic bagging system – completely dismantled and ready for collection For sale is a fully automatic bagging system, suitable for a wide range of bulk materials such as flour, pellets, and granulates. The system impresses with its high degree of automation and robust industrial design. Features and components: - Pneumatic bagging unit - Fully automatic sewing machine for sealing the bags - Rollers for flattening filled bags - Roller conveyors for in-plant transport - Robotic arm for automatic palletizing of the bags - Automatic pallet magazine - All electrical cables and control cabinets have been professionally dismantled The entire system has already been dismantled, neatly stored on pallets, and is ready for immediate collection. Comprehensive electrical documentation with schematics is available. Special features: Ideal for industrial applications with high throughput and automated processes. All components are perfectly coordinated, ensuring an efficient packaging and palletizing process. Fedpoyw Rffsfx Afuepn If interested or for further information, we are happy to assist you.

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, total length: 3,400 mm, total width: 600 mm, total height: 1,400 mm, warranty duration: 18 months, overall weight: 500 kg, input voltage: 400 V, power: 3 kW (4.08 HP), compressed air connection: 8 bar, air pressure: 7 bar, Equipment: documentation/manual, Made in Ukraine, CЄ, new. 18 month full warranty. SAS200 – Automatic Casing-Free Forming & Cutting Module for meat, fish, and Pet-Food Snacks easy connects to your vacuum filler This professional system is designed for the industrial production of high-margin, casing-free snacks such as mini salami, meat sticks, jerky strips, fish snacks, and pet treats. The SAS200 can be connected to any standard rotary vacuum filler — including Handtmann, REX, Vemag, or our own gear-driven vacuum filler. Main Features: • Output capacity: up to 500 kg/h • Forming nozzles: cylindrical (Ø8–20 mm) and flat (25×5 mm to 200×5 mm) with auto cutting by length before drying • CE certified, industrial-grade • Stainless steel, hygienic design • Pneumatic guillotine with automatic water cleaning • Integrated decompressor for uniform extrusion • Operator control via 10.1” TFT touchscreen (Delta) • Incl set drying trolleys 30 rows with 60 trays 900 x 500mm (60 trays, 30 rows) Compatibility: Fpsdpfx Asp S Nv Iefusn ✅ Works with most rotary fillers (Handtmann, REX, Vemag) ✅ Also available with our own gear-driven vacuum filler (200 L) Live demo available in: • 🇬🇧 Ashford, United Kingdom – Windsor Food Machinery • 🇵🇱 Kraków, Poland – REGIS Showroom