High-performance pillar drilling machine

ALZMETALL AB 4 SV

Condition: used, Year of construction: 1978, bore capacity in steel (diameter) 40 mm Bodpfx Afjv Ehftjcecw throat 345 mm bore stroke 200 mm table surface area 720 x 5 mm

Condition: new, bore capacity in steel (diameter) 50 mm bore capacity in cast iron (diameter) 60 mm threading cutting capacity: M36 throat 400 mm bore stroke 230 mm spindle taper MK 4 feed range - spindle 0,1-0,2-0,3-0,4-0,5-0,6 mm/U spindle turning speed range 54 - 1032 U/min transmission ratio 12 Stufen column diameter 200 mm table surface area 550 x 550 mm total power requirement 3,0 kW weight of the machine ca. 0,72 t dimensions of the machine ca. 0,6 x 1,2 x 2,6 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP Bsdpfofg U Ttjx Afcjcw - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark

Condition: refurbished (used), functionality: fully functional, spindle mount: MK 4, total height: 1,970 mm, throat depth: 345 mm, spindle speed (max.): 720 rpm, spindle speed (min.): 80 rpm, 1.) Alzmetall AB4/SV Speed range: 80–720 rpm Feed: 0.09/0.16/0.28 mm/rev Spindle taper: MT4 Arm reach: approx. 345 mm Drive power: approx. 1.8 kW Column diameter: approx. Ø 160 mm Quill stroke: approx. 180 mm Table clamping surface: approx. 730x560 mm with 14 mm T-slots Dimensions: 1000x500x1970 mm Weight: approx. 600 kg Price: 2,400 EUR net plus VAT 2.) Gillardon GB30 Speed range: 60–1,600 rpm Spindle taper: MT3 Arm reach: approx. 320 mm Drive power: 1.1/1.6 kW Bsdpfx Ajunhtxjfcocw Column diameter: approx. Ø 130 mm Quill stroke: approx. 175 mm Table clamping surface: approx. Ø 500 mm with 14 mm T-slots Table swivel range: approx. +/- 90° Dimensions: 1000x500x1970 mm Weight: approx. 400 kg

Condition: used, Year of construction: 1993, bore capacity in steel (diameter) 40 / 23 mm throat 320 mm Bcsdpfxeyfwzuo Afcsw bore stroke 180 mm 4 speeds 30 - 765 U/min table-size 720 x 550 mm weight 480 kg dimensions 750 x 900 x 1900 mm Equipment: - Multi-spindle head, drill Ø 23 mm - automatic feed - coolant device - infinitely variable speed - adjustable drilling depth stop

Year of construction: 1998, condition: good (used), machine/vehicle number: 4422758898019, Offer 22646 Hydr. profile and bar shears with notching device and hole punching machine Technical data: - Flat steel shear - flat steel - 400 x 16 mm - or: 300 x 18 mm - Section steel shear - L- and T-iron at 90° 130 x 12 mm - square steel / round steel 40 / 40 mm - notcher - with square notcher for sheets up to approx. 13 mm - notch depth approx. 70 mm - notch width approx. 52 mm - Hole punch - punching force approx. 60 t - throat 400 mm - stroke approx. 10 to 50 mm - punches in steel up to Ø 31 in 15 mm - material stop - div. 10 pcs. punch + dies - drive 400 V / 5,5 kW - space requirement W 1100 x H 2000 x D 1700 mm Bcodsmb U Slopfx Afcsw - weight approx. 2100 kg

Condition: used, Column drilling machine ALZMETALL type AB 4 SV Machine no. No. 14805 Year of construction approx. 1980 drilling capacity 40 mm Spindle holder MK 4 - short quill throat 340 mm Quill stroke 180 mm Table size 710 x 560 mm Column diameter 160 mm Spindle speed 30 - 765 rpm infinitely variable Motor power 2.3 and 3.4 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and infinitely variable via variator gearbox - Reduction gear with 2 gear stages for high torque at low speeds - Spindle on/off via rotary switch or electric foot switch - Automatic feed 0.1 - 0.2 - 0.3 mm/rev - Table height adjustment via hand crank - Machine base with machined workpiece support surface - LED lighting device Space requirement L x W x H 1200 x 725 x 2050 mm Bcodpfxen N Ekco Afcsw Weight 615 kg good condition

Condition: used, Year of construction: 1978, number of spindles 3 bore capacity in steel (diameter) 40 mm bore stroke 180 mm weight of the machine ca. 2,3 t Bedpfed Ih S Sex Afcscw

Condition: used, pressure 100 t punching cross-cut in cmm Ø 31 in 25 mm stroke 10 - 50 mm column arm 510 mm Bsdpfexabrfox Afcscw work height max. 1100 mm no. of strokes 14 - 45 Hub/min punch diameter max. Ø 90.0 mm oil volume 103 l total power requirement 7.5 kW weight of the machine ca. 2400 kg. range L-W-H 1750 x 1020 x 2050 mm maintained condition (!!) New price without accessories approx. 25.000 euros Special price on request Furnishing: - heavy / robust electro-hydraulic hole punch, with large throat - Punching station with material/sheet metal scraper - stepless stroke adjustment .. 10-50 mm - freely movable foot switch including protective cover - hydraulic low pressure finder for foot switch operation - Crane hanging eye for easy transport - side storage area - Hydraulic unit, integrated - Three-phase motor, 400 volts, 50 Hz - original instruction manual

Condition: good (used), Year of construction: 1999, machine/vehicle number: 20403, Offer 25170 Bcjdjwncaispfx Afcjw Technical Data: - Drilling capacity in steel ST 60 40 mm - Drilling ability in steel ST 60 50 mm - Drill spindle mount MK 4 - Drill spindle stroke 180 mm - Drill spindle speeds steplessly adjustable with gear stage - Stage 1 60 - 210 rpm - Stage 2 210 - 765 rpm - Stage 3 120 - 420 rpm - Stage 4 420 - 1530 rpm - Throat 330 mm - 3 feeds 0.1 - 0.2 - 0.3 U/min - Table with 2 T-slots 720 x 360 mm - Height adjustable via rack with hand crank - Max. distance table – drill spindle ca. 780 mm - Max. distance machined base plate - drill spindle 1250 mm - Coolant device - Lighting - Machine vise - Various 10 pcs HSS drills - Drive 400 V / 2.6 / 4 kW - Space requirement approx. W 720 x H 2050 x D 1150 mm - Weight approx. 350 kg

Condition: good (used), Year of construction: 1984, machine/vehicle number: 15470, Offer 25095 Bcjdpfjwd Ii Uox Afcow Technical specifications: - Drilling capacity in steel ST 60: 40 mm - Drilling capacity in steel ST 60: 50 mm - Drill spindle mount: MT 4 - Drill spindle stroke: 180 mm - Drill spindle speeds continuously adjustable with gearing - Stage 1: 50 - 175 rpm - Stage 2: 175 - 640 rpm - Throat depth: 330 mm - 3 feed rates: 0.1 - 0.2 - 0.3 rpm - Table with 2 T-slots: 720 x 360 mm - Table height adjustable via rack and pinion with hand crank - Max. distance between table and drill spindle: approx. 780 mm - Max. distance between machined base plate and drill spindle: approx. 1250 mm - Coolant system - Lighting - Drive: 400 V / 4 kW - Space requirement approx. W 720 x H 2050 x D 1150 mm - Weight approx. 500 kg

Condition: used, Year of construction: 1965, bore capacity in steel (diameter) 40 mm total power requirement 4 kW Bodpfsv S Iqcsx Afcecw

Condition: used, Pillar drilling machines Bcsdpjb N Ezrjfx Afcjw