Run press

Amada HFBO

Condition: ready for operation (used), Year of construction: 1996, pressure 80.0 t chamfer lenght 2550 mm distance between columns 2130 mm column arm 420 mm ajustment speed 100 mm/sec working feed 10.0 mm/sec return speed 80.0 mm/sec stroke 200 mm dayligth 470 mm table width 60.0 mm table height 910 mm Number of working hours ca. 37.102 h total power requirement 9.0 KW weight of the machine ca. 5750 kg range L-W-H 3100 x 2180 x 2540 mm good / well-maintained condition (!!) Gbodpfxjxabnyo Adiet - Inspected condition - Machine video - ?v=fwdjSiQYq_A Equipment: - CNC electro-hydraulic press brake - OPERATEUR CNC control for 8 axes X1 + X2, Y1 + Y2, R1 + R2, Z1 + Z2 - CNC-controlled backgauge adjustment (X-axes) - CNC-controlled vertical adjustment of the stop fingers (R-axes) - CNC-controlled left-right adjustment of the stop fingers (Z-axes) - Freely movable two-hand control & foot switch - Tool crowning - AMADA type - Various tools - CE marking - Side guards (hinged doors) - Rear guards (hinged door) - 2x emergency stop buttons at the front - Operating instructions

Condition: excellent (used), Year of construction: 2000, Technical data: Working length: 4100 mm Stand width: 3650 mm Pressing force: 170 to CNC control: OPERATOR II grafic controlled axes: Y1/Y2; X1/X2; R1/R2;, Z1/Z2 motorized adjustable back gauge throat depth: 300 mm stroke: 200 mm crowning Working height: 960 mm Motor power: 13 kW Dimensions (length x width x height): approx. 4500 x 2200 x 2900 mm Weight: approx. 14 tons Accessories: 1 set of tools Gbsdpfet Upp Usx Adijt The seller is not liable for typing or data transmission errors. The machine's appearance, technology and wear correspond to its age; used machines are sold without any warranty.

Condition: used, Year of construction: 1998, machine/vehicle number: H981224, functionality: fully functional, power: 11 kW (14.96 HP), pressing force: 170 t, stroke length: 180 mm, operating speed: 8 mm/s, reverse speed: 80 mm/s, table width: 180 mm, table length: 4,230 mm, table height: 960 mm, throat depth: 410 mm, clearance between the columns: 3,760 mm, oil tank capacity: 150 l, total length: 4,500 mm, total width: 2,200 mm, total height: 2,900 mm, overall weight: 13 kg, Equipment: CE marking, documentation/manual, safety light barrier, This machine is still operational and can be inspected at the factory in Northern Germany. Working length: 4100 mm Distance between uprights: 3650 mm Pressing force: 170 tons Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Motor-adjustable rear stop Gbjdpfxszvliyo Adiet Overhang: 300 mm Stroke: 200 mm Crowning Working height: 960 mm Motor power: 13 kW Dimensions (length x width x height): approx. 4500 x 2200 x 2900 mm Weight: approx. 14 tons Accessories: 1 set of tools

Condition: ready for operation (used), Year of construction: 1998, operating hours: 78,026 h, pressing force: 102 t, overall weight: 6,750 kg, number of axes: 6, This 8-axis AMADA HFBO 100-30 press brake was manufactured in 1998. It features a maximum press force of 1000 kN and a bending length of 3100 mm, providing robust capabilities for various applications. The machine has undergone software upgrades and cylinder replacements in 2024. If you are looking to get high-quality bending capabilities, consider the AMADA HFBO 100-30 press brake we have for sale. Contact us for further details. • Distance between frames: 2700 mm • Maximum stroke: 200 mm Godpjzl Dvqefx Adiobt • Number of axes: 8 (Y1, Y2, X1, X2, R1, R2, Z1, Z2) • Voltage: 400/415 V • Frequency: 50 Hz • Nominal current: 199 A • Number of phases: 3 • Installed power: 9 kW • Noise level:

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, operating hours: 70,104 h, pressing force: 81 t, total length: 3,100 mm, total width: 2,180 mm, total height: 2,540 mm, overall weight: 5,750 kg, working width: 2,550 mm, Equipment: emergency stop, We offer this ready-to-use Amada HFBO 80-25 press brake, year of manufacture 1999. If you have any questions or need further information, please feel free to send us a message or give us a call. The seller accepts no liability for typographical or data transmission errors. The machine's appearance, technical condition, and wear are consistent with its age; used machines are sold without any warranty. Gbsdpfx Aoy H Eqbedijt

Condition: ready for operation (used), Year of construction: 1998, operating hours: 80,162 h, pressing force: 51 t, stroke length: 200 mm, controller manufacturer: AMADA, controller model: Operateur, number of axes: 8, This 8-axis AMADA HFBO 5020 press brake was manufactured in 1998. It features a bending length of 2090 mm and a press capacity of 500 kN. The machine includes a stroke of approximately 200 mm and an open height of around 480 mm. If you are looking to get high-quality bending capabilities, consider the AMADA HFBO 5020 press brake we have for sale. Contact us for further details. • Stroke: approx. 200 mm • CNC control: OP-2 CNC • Controlled axes: 8 (Y1, Y2, X1, X2, R1, R2, Z1, Z2) • Open height: approx. 480 mm • Throat depth (frame throat/gap): approx. 400 mm • Distance between uprights: approx. 1,665–1,690 mm • Table width (bottom beam width): 60 mm • Working height (table height from floor): 910 mm • Max. hydraulic pressure: 270 bar • Number of cycles: 4 cycles/min (at nominal conditions) • Main motor power: 4.5 kW Gjdpfx Adjy Alvpoijbt Technical Specification Bending Length 2090 mm

Condition: excellent (used), Technical Data: Working length: 3100 mm Distance between uprights: 2560 mm Pressing force: 220 t CNC control: OPERATOR II grafic Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Bending simulation automatic crowning motorized adjustable backgauge Throat depth: 650 mm Stroke: 200 mm Working height: 960 mm Laser safety system: FIESSLER Motor power: 17 kW CE marking Dimensions (LxWxH): approx. 3700 x 2400 x 2900 mm Weight: approx. 15 tons Accessories: 1 set of tooling: 1 upper tool 120 mm 1 lower tool, segmented die: V 50, 35, 22, 16 Gsdpfx Aoyzm Nhediobt Condition: Very good condition, complete overhaul in 2026 The seller is not liable for typing or data transmission errors. The machine's appearance, technology, and wear are age-appropriate; used machines are sold without any warranty.

Condition: excellent (used), Technical specifications: Revision in 2024 Working length: 3100 mm Column width: 2760 mm Press force: 220 tons CNC control: OPERATOR II Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Automatic crowning Motorized adjustable backgauge Thrust: 650 mm Gbjdjv Tcnljpfx Adiet Stroke: 200 mm Working height: 960 mm Motor power: 17 kW CE mark Dimensions (length x width x height): approx. 3700 x 2400 x 2900 mm Weight: approx. 15 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: used, Year of construction: 1998, pressure 100 t chamfer lenght 3100 mm distance between columns 2750 mm Stroke beam 200 mm max. opening beam/table 470 mm C-recess 350 mm traveldistance X1+X2 cnc programmable 600 mm R1 and R2 axis controlled by cnc 150 mm Z1+Z2 axes controlled by cnc 0-2500 mm Quick speed,inspeed 100 mm/sec opening speed 0-10 mm/sec Number of working hours 8500 h length 3600 mm width 1900 mm height 2600 mm Gbedpfx Aeyw Tl Uodijt weight 6750 kg total power requirement 9 kW dimensions of the machine ca. 4x2x3 m All machines can be viewed under power at all times. Demonstrations of the machines possible at any time.

Condition: used, Year of construction: 1999, pressure 100 t chamfer lenght 3100 mm distance between columns 2750 mm Stroke beam 180 mm max. opening beam/table 470 mm C-recess 350 mm traveldistance X1+X2 cnc programmable 600 mm R1 and R2 axis controlled by cnc 120 mm Z1+Z2 axes controlled by cnc 300-2700 mm Quick speed,inspeed 100 mm/sec bendingspeed 0-10 mm/sec opening speed 100 mm/sec Number of working hours 29000 h length 3500 mm width 1950 mm height 2550 mm weight 6700 kg total power requirement 8 kW dimensions of the machine ca. 4x2x2,5 m Control CNC Gbodpfx Adeyw Tl Ieiet All machines can be viewed under power at all times. Demonstrations of the machines possible at any time.