Vertical packaging system

AMTEC

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, total length: 2,200 mm, total height: 1,230 mm, total width: 1,400 mm, type of input current: three-phase, product height (max.): 180 mm, product height (min.): 10 mm, product length (min.): 200 mm, product length (max.): 1,000 mm, product width (max.): 630 mm, product width (min.): 200 mm, input voltage: 400 V, compressed air connection: 6 bar, input frequency: 50 Hz, energy consumption: 21 kWh, feed rate X-axis: 26 m/min, workpiece weight (max.): 10 kg, For sale is an AMTEC film packaging system, consisting of a vertical angle sealing machine SPEEDshrink 40XXL PRO and a high-speed POF-XL shrink tunnel. The system was factory-adapted for larger products and product weights up to 10 kg. The enlarged sealing frame and the reinforced conveyor drive enable the packaging of products up to 1,000 mm in length. Technical data and features: -Product dimensions according to special design: Length 200–1,000 mm, Width 200–630 mm, Height 10–180 mm -Sealing frame: 1,200 × 700 mm -Product weight: up to 10 kg -Conveyor speed: up to 26 m/min -Additional frequency converter for speed control of the conveyor belts -Stable four-column guide for the vertical sealing frame -Height and pressure of the sealing frame adjustable -Adjustable perforation module -Compressed air requirement: 6 bar -Connection power angle sealing machine: approx. 4 kW Cjdpfe Ah Hvlsx Ai Tshd Shrink tunnel POF-XL High-Speed PRO: -For processing POF shrink film -Double air circulation with adjustable airflow -Tunnel dimensions: approx. 1,700 × 790 × 350 mm (L × W × H) -External dimensions: approx. 2,200 × 1,400 × 1,230 mm (L × W × H) -Electrical connection according to documentation: 380 V, 21 kW The machine is in good, fully functional condition and has been used only sparingly. The machine is ready for operation and can be inspected and demonstrated under power after prior appointment. A trial run is possible after consultation. If you are interested, we look forward to receiving your inquiry.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, Flow wrapping machine, almost like new, used for approx. 4 weeks. Optimized for the packaging of dust masks such as FFB2 masks. High speed packaging of single masks or multipacks in series in transparent, printed or laminated OPP film. Feeding table with belt conveyor. Safe film feeding from the bottom for products with low stability. Automatic folding and sealing. Machine stopping in selected position to avoid film sticking to the knife. Includes: print mark sensor; PID temperature control; ink printer for, e.g., batch number, best-before date. Optional: gas flushing device. - Technical specifications: max. speed of the machine in neutral: 230 cycles/min; max. bag (not product) dimensions: L(120-280)xW(50-160)xH(0-40) mm; max. film width: 350mm; 1 rotating knife driven by servo motor; 220V, 2.8 kW; no compressed air required. Chjdpfj Ah Eq Eex Ai Tjd

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Equipment: documentation/manual, Flow wrapper for packaging one or more regular or irregular dry, small products with (B)OPP film. Servo motor-driven feed, longitudinal and end sealing, touchscreen operation. Feed table with automatic transport into the machine via carriers. Film feed from above. Automatic folding and sealing process. Machine stops at set position to prevent film from sticking to the knife. Includes: print mark sensor; PID temperature control; ink printer for, e.g., batch number, best-before date; water cooling system with installed water tank (~7L) for cooling e.g. easily melting foods. - Specifications: Bag dimensions (not product dimensions): L((65-190)OR(120-280))xW(30-110)xH(0-40)mm; max. product height: 40 mm; max. speed of the machine in neutral: 230 cycles/minute; max. film width: 250 mm; max. film roll diameter: 320 mm; suitable film thickness: 50-120 µm; 2 rotating knives (cross sealing); Power supply and power consumption: 220V, 2.4kW; compressed air is not required; machine dimensions: L3770xW670xH1450; weight (net): 500kg. Csdpfx Aio Ah Elvo Tehd

Year of construction: 2020, condition: ready for operation (used), Plastic processing machine manufactured in 2020. This AMTEC Speed Shrink 40 PRO features a shrink chamber dimension of 600 x 400 mm and a conveyor speed of 0-20 m/min. It operates at a maximum temperature of up to 250 °C and has a power supply of 3-phase, AC 380V. If you are looking to get high-quality shrink wrapping capabilities, consider the AMTEC Speed Shrink 40 PRO machine we have for sale. Contact us for further details. Chodpfxsz R A H Do Ai Tsd

Condition: new, Year of construction: 2023, PRO-version automatic side sealer, suitable for products without any length restriction. Sealing position (where the sealing bar and the counterpart meet) adjustable in height for a centrally positioned sealing seam. Quick change perforating pins. Ideal to be combined with AMTEC SHRINKtunnel POF-XXXL (high speed) PRO-version. Touch screen for control and setting, easy to operate. Easy film reloading near floor. Optional available: stacker systems for shrink wrapped panels, etc. - Specifications: max. speed of the machine in neutral: 60 cycles/minute; max. package size: L(300- unlimited)xW(200-1000)xH(10-180) mm; sealing blade width: 1140mm; 220V/5.5kW; 6bar; machine dimensions: L2995xW2870xH1485mm. Cjdpfogzqntex Ai Tshd Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Economical blister machine with a quick format change unit for more flexibility. Universal feeder for handling of almost all types such as capsules, flat tablets, oval tablets, capsule tablets, triangular tablets or other various shapes. Adjustable sealing pressure for different product requirements. The machine is additionally equipped with a film waste material trimming cutting device which allows production runs of approximately 90 minutes. Integrated camera inspection systems (pinhole detector, BASLER color camera) automatically eject defective blisters and ensure the quality of the blister packs. Two holding devices for two blister film rolls and the integrated blister film splicer increase efficiency during material changeover. The length of the final blister is adjustable by software. Including water chiller system, 1 x aluminum format set with dedicated feeder, aluminum/PVC format set with brush feeder, print mark detection unit. - Specifications: sealing principle: platen sealing; max. format area (index x width): 245 x 152 mm; max. forming depth: 12 mm; processable forming materials: Al, Al/PVC; max. speed of the machine in neutral: 20 cycles/minute; Al/Al 40 cycles/min, Al/PVC 70 cycles/min (corresponds with 57x80 mm Al/PVC blister: 280 blister/min); number of lanes: customized; max. roll diameter forming film: 600 mm; power consumption: 9.6kW; machine dimensions: 4800×740×1700mm; weight: 2200kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Chodpfxev Nkvcs Ai Tjd

Condition: new, Year of construction: 2025, Fully automatic cardboard box former for more efficient packing processes. The cartons are automatically removed, built up and taped at the bottom (in only one direction). The constructed boxes will then feed out to a collecting table to fill. - Specifications: PLC and touch screen by SIEMENS; size of boxes in mm: L(250-450)xW(150-400)xH(100-400); max. speed of the machine in neutral: 12 cycles/minute; power: 110/220V, 0.3kW; compressed air: 5-6bar, 0.4m³/min; tape width in mm: 48/60/75; machine dimensions and weight: L2300xW1900xH17000mm, 650kg. Cjdpfxsv Nkvps Ai Tohd Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Fully automatic carton closing machine for seal and tape the lids of the cases. Sealing and taping (in only one way) of same sized boxes in an efficiently, rapidly and precisely way. - Specifications: size of boxes in mm: L(200-600)xW(150-500)xH(100-500)mm; max. speed of the machine in neutral: 20 cycles/minute; power: 220/380V, 0.3kW; tape width in mm: 48/60/75; machine dimensions and weight: L1770xW850xH1520mm, 250kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Chjdpfx Aiev Nkv Ao Ted

Condition: new, Year of construction: 2025, Cellophaning machine for wrapping rectangular, round or oval products. The Cello Wrapper is designed primarily for cellophaning multiple products into one package, for example 10 rice cakes. In addition to cylindrical shaped products, oval or rectangular shaped products can also be cellophaned. The packaging process includes automatic feeding, stacking, wrapping of products, cutting and unloading of the final package. PLC from OMRON, touch screen from WEINVIEW, switches and buttons from SIEMENS. Module for tear thread and an inkjet printer are included. - Specifications: max. speed of the machine in neutral: 30 cycles/minute; product dimensions* diameter (80-100); length final packing: 50-220mm; power: 220V, 4kW; compressed air consumption:0.03m³/min; dimensions packing machine (length of feeding belt can be customized): L4200xW1080xH1820mm; weight: about 1000kg. * Refer to cylindrical products. Chjdpev Nkx Dofx Ai Tod Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Automatic multilane cup or container filling system including film sealing module. - Suitable for different container sizes, shapes and materials (e.g. PP, PS, PET, Paper, laminated films, etc.). Perfect to pack instant food, noodles, pasta, dried fruit, snacks, candies, chocolate, soup powder, frozen food, yogurt, ice cream, jelly, etc.. Automatic operation from drop cup, filling to sealing. Suitable for all kind of (separate) dosing systems for liquids, pastes, granules, powder, etc.. Touch screen for easy operation, stainless steel version, easy cleaning. Print mark sensor. Customizable mould for container allows a wide range of sizes/shapes. - Specifications: number of lanes: 2; max. speed of the machine in neutral: 40 cycles/minute; power: 220V, 2.1kW; compressed air: 0,2m³, 6bar; machine dimensions: L3000xW850xH1600mm. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Chodpfx Ajv Nkynsi Tsd Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.