Bed type milling machine

ANAYAK Performer 2000 MG

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, CNC controller: HEIDENHAIN iTNC530 Revised in 2022 Axes Nsdpfsrxfniox Afcowc X-axis travel mm: 2.000 Y-axis travel mm: 1.000 Z-axis travel mm: 1.100 C-axis degrees: 0.001º (cont) Worktable Table dimensions mm: 1.250x1.400 Maximum weight on table kg: 5.000 Spindle Spindle speed rpm: 60 - 5.000 Automatic Spindle (Axes A/B): 2. 5º/2. 5º Tool system Tool holder: ISO-50 DIN 69871A Tool magazine slots: 60

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,700 mm, travel distance Z-axis: 1,500 mm, Heidenhain 530 Diagonal milling head with 2.5° x 2.5° indexing Spindle speed up to 6,000 rpm Tool holder SK50 Internal cooling with 36 bar Nwjdpfsx I A Hvsx Afcec Longitudinal chip conveyor + cross conveyor

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, CNC Turning and Milling Center - DMG GILDEMEISTER - CTX gamma 1250 TC YOM: 2009, until 2011 showroom machine, from 2012 operating The machine can be inspected by appointment in the factory under power. Condition: Good (high accuracy), ready for immediate use. Spindle hours (August 1st, 2025): 9.580 h The heart of the machine is the integrated traveling column with turning milling spindle and interpolating B-axis. Machine basic data: * Part hollow clamping device (hydraulic) * C-axis * Cross slide above with turning/milling spindle as motor spindle, with hydraulic clamping in turning, tool holder: Capto C6 * Y-axis: +/- 200 mm * B-axis: +/- 120° * Disc-type tool magazine * Absolute, direct measuring systems in X-, Y-, Z1-axis * USB-interface, Ethernet interface TECHNICAL SPECIFICATIONS: * Control: Heidenhain CNC Pilot 4290, 3-D path control TURN PLUS Working area: * Swing diameter over bed: 630 mm * Turning diameter: 630 mm * Spindle distance: 1.510 mm * Bar diameter max.: 65 mm Main drive I: * Drive power (100% / 40% ED): 24 / 34 kW * Speed range from - up to: - 5.000 rpm * Speed of the C-axis: - 5.000 rpm Turning/milling spindle: * Tool holder: Capto C6 * Spindle speed: - 12.000 rpm * Drive power (100% / 40% ED): 13.2 / 22 kW * Torque (100% / 40% ED): 60 / 100 Nm Tool magazine: * Number of tools: 36 * Dimensions of the machine approx. (Width/Depth/Height): 6.860 x 4.220 x 2.530 mm * Total weight of the machine approx.: 18,5 tons EQUIPMENT: * Well equipped … * No steady rest available * Documentation complete available. Detailed technical data sheet and information on equipment available on request. There is no guarantee for correctness and completeness of the technical details Njdpfx Afjw Hg Nlscswc and and accessories.

Condition: used, Year of construction: 2014, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 20 rpm, RepairFIT by Dornhöfer The Difference. Installation & Commissioning Included! TECHNICAL MAIN DATA Year of manufacture: 2014 Travel/Capacity: Longitudinal (X): mm 3,000 Transverse (Y): mm 1,200 Vertical (Z): mm 1,500 Clamping table/Clamping surface: Length: mm 3,200 Width: mm 1,000 Number of T-slots on table surface: pcs. 7 T-slot size: mm 22H12 Reference slot: mm 22H7 Distance between slots: mm 140 Maximum transport load: kg 11,000 Paint: graphite grey RAL 7024 and agate grey RAL 7038 Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Main drive: Maximum drive power, from 198 rpm: kW 30 Spindle speed range: Spindle speed: rpm 20-6,000 Maximum torque: Nm 935 Speed control: 3-stage (oil-cooled) with automatic changeover Feed rates: X, Y and Z axes mm/min: 2 – 15,000 Maximum rapid traverse speed: X, Y and Z axes mm/min: 25,000 Maximum feed force: X, Y and Z axes: N 22,000 Space requirements: Length approx. BT3200: mm 8,100 (without cross conveyor +1,280 mm) Height approx. (at Z = 1,500 mm): mm 3,800 Width approx. (at Y = 1,200 mm): mm 5,000 (with spacer 4,500 mm) Weight: approx. kg 20,200 Connected load: approx. KVA 52 HEIDENHAIN iTNC 530 HSCI Automatic MTE universal milling head Diagonal 2.5° x 2.5° Automatic tool changer with 40 positions 2 chip conveyors + cross conveyor Coolant system with 20 bar & through-spindle coolant RepairFIT is our proven offer for a profitable entry into our product lines. Njdpfoygipajx Afcewc The machines available in this line are sourced through a strict selection process and undergo thorough inspection (Deep-Dive Check). After intensive cleaning, any identified obvious defects and faults are professionally repaired by our qualified service team.

Condition: good (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: ABCM 1250/3, type of input current: three-phase, Gas burner for I-beams. manufacturer - Peddinghaus Germany; Njdpfx Aferbif Tocswc type - ABCM 1250/3; control - Fagor; The device is connected and functional.

Condition: excellent (used), Year of construction: 2018, operating hours: 26,811 h, functionality: fully functional, machine/vehicle number: -, turning length: 1,350 mm, turning diameter over cross slide: 715 mm, turning diameter: 550 mm, spindle motor power: 48 W, spindle speed (max.): 3,000 rpm, spindle bore: 106 mm, travel distance X-axis: 380 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 1,350 mm, mount diameter: 12 mm, total height: 2,346 mm, total length: 4,088 mm, total width: 2,129 mm, swing diameter over bed slide: 950 mm, overall weight: 10,400 kg, High specification machine with Fanuc 32iTB control. Many options including SMW Autoblok steady rest on programable Servo base, coolant through steady, high pressure coolant, enlarged left hand door to allow 920 mm swing workpiece (950 mm max). Various other options. New cost in 2018 over £200k. Nedpfx Ajvz Ab Usfcowc

Condition: excellent (used), operating hours: 8,064 h, Brand : LAGUN Model : GBM-22E Type : CNC 5 EJES Cnc :HEINDENHAIN 530 Table dimensions : 2.200 x 1000 mm Number and width of T slot: 7 x 22 mm Distance between T slots: 140 mm Axis travels (X,Y,Z) : 2.000 x 1.200 x 1.000 mm Head type : Automático Spindle speed : 4.000 rpm Taper : ISO 50 DIN 2080 Main motor : 28 kw Continuusly variable speeds : 50➗ 4.000 Speed range : 2 Rapid traverse : 10.000 mm/min Machine weight : 15 tn Electronic hand-wheel : Yes Working hours : Machine running: 22.924 h Control on : 23.132 h Automatic cycle: 8.064 h Nsdpfx Afoyg R Abjcowc

Condition: used, Year of construction: 2008, operating hours: 16,772 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,500 mm, position of the milling head: Automatico 2,5ºx2,5º, spindle speed (max.): 4,000 rpm, table width: 1,000 mm, table load: 10,000 kg, table length: 4,200 mm, total height: 4,000 mm, total width: 3,500 mm, total length: 10,000 mm, overall weight: 21,900 kg, Milling machine LAGUN GBM42 Njdpfx Asyiu Rnefcjwc

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: F39033, KEKEISEN Universal Bed Milling Machine UBF 2000/13, machine no. F39033; well maintained, very good condition, mechanically partly overhauled in 2025 2-axis universal head automatically swivelling, with locking in Hirth coupling Intermediate positions adjustable in 1° steps by jog mode SK50 tool holder according to DIN 69871/872 Longitudinal travel of the table (X-axis) 2000 mm Transverse travel of the headstock (Y-axis) 1000 mm Vertical travel of the headstock (Z-axis) 1300 mm Machine table size 2200 x 960 mm, with T-slots 22 mm, spacing 140 mm Rotary table rotation 360° (stepless, with clamping) Rotary table load 5000 kg Spindle power 30 kW (100%ED), max. torque 1180 Nm Spindle speed 20 - 3800 rpm (infinitely variable in 2 ranges), with oil cooling Axis speeds 4 m/min or 10 m/min rapid traverse Nodpfx Afeykuxhjcswc CNC control Heidenhain TNC 426 CA with electric handwheel HR 330 Drive system make Baumüller Coolant system with inner cooling up to 16 bar. Air/water changeover Purolator double-switching filter with 200 litre collecting tank Tool changer for 30 tools Work area panelling all round, open at the top, with longitudinal chip conveyor Connection data 400 V; 50 Hz; approx. 55 kVA without installation elements (fixators),

Year of construction: 2005, condition: ready for operation (used), Travel X/Y/Z: 1500mm/800mm/1000mm, Table dimensions X/Y: 1700mm/750mm, max. table load: 2000kg, Spindle speed: 2500rpm, Spindle power: 15kW, Tool positions: 24, Tool holder: ISO50, Feed rate: 10m/min, Machine dimensions X/Y/Z: approx. 5300mm/3400mm/2500mm, Weight: approx. 10000kg, Control: Heidenhain iTNC530, An on-site inspection is possible. Nwjdpfx Afoyit Hnjcoc