Arburg 320C 500-170 (2014) golden edition

Arburg 320 C 500-170

Year of construction: 2006, condition: ready for operation (used), An injection molding machine used in a cleanroom with a laminar flow module Max Patek and diverter is available. Clamping force: 500kN, screw diameter: 30mm, max. ejector stroke: 125mm, mold installation height: 200mm, tie bar spacing: 320mm, max. shot volume: 77g, platen spacing: 550mm, flow module air capacity: 450m³/h, operating hours: approx. 62000h. Without temperature control units and hopper dryer. The machine shows paint flaking, and the hydraulic hoses should be replaced. Documentation available. An on-site inspection is possible. Hedpfx Aaeykbgfocsnh

Condition: excellent (used), Year of construction: 2022, operating hours: 2,400 h, 1x Arburg 320C 500-170 Golden Edition with integral picker Year: 05/2022 Operating hours: 2,400 A total of 3 machines available: 1x Year: 2020 2x Year: 2022 Features: CG series 320 C 500 - 170 Thermoplastic cylinder complete, 35 mm, wear-resistant Standard screw coupling, double flat coupling geometry Selogica direct control system Hydraulic system with 2 variable displacement pumps Anniversary model GOLDEN EDITION Thermoplastic processing Open nozzle 35 mm Nozzle tip radius 35 Hsdpfx Aaoyi Ayqecenh Heating band for open nozzle Clamp plate set 320 central, Ø 125 mm Pneumatic maintenance unit with 1 pressure regulator (1x1000l/min) Electric connection for air blow-out device 1 on machine frame Air blow-out device 2 with 3/2 valve on machine frame Sorting unit, longitudinal installation including connection Mold clamping with safety guard open Programmable conveyor belt integrated in machine frame, longitudinal Preparation for INTEGRALPICKER V Robot system interface (according to EUROMAP 67), 50 pin Socket combination: 1 CEE, 1 Schuko via FI 30mA Type B safety switch Basic connectivity for further "Connected Services" Printer interface, serial USB CompactFlash interface for data storage Operation authorization via chip card according to EUROMAP 65 Parallel connection for nozzle tip heating band or adapter User-configurable page for "startup parameters" Coloring device interface Shut-off valve for cooling water inlet Cooling water filter 100 µm included 3 free, manually adjustable cooling circuits GOLDEN Automation Package with IP-V Regulated machine cooling circuits aXw Control Setup Bundle aXw Control Start-Stop Bundle ARBURG Remote Service (ARS) Productivity package Initial commissioning by ARBURG service CD operating manual and spare parts list Sign plates language: German (DE) Without granulate hopper 50 L Without heating band for nozzle tip Elastic machine mounting on rubber-metal elements Ejector plate connection with safety device Ejector quick coupling Water-cooled control cabinet Hydraulic ejector Guard open at top Standard equipment packages Machine equipped with INTEGRALPICKER New ARBURG color scheme 5625-S356/XX-B-Z150 Centering on moving mold fixing plate 150 mm instead of 125 mm

Condition: excellent (used), Year of construction: 2022, operating hours: 2,100 h, 1x Arburg 320C 500-170 Golden Edition with Integral Picker Year of manufacture: 05/2022 Operating hours: 2,100 A total of 3 machines are available! 1x Year: 2020 2x Year: 2022 Equipment: Hodpfxsyi Axmo Aacsnh - CG series - 320 C 500 - 170 - Complete 35 mm wear-resistant thermoplastic cylinder - Standard screw coupling, square coupling geometry - Selogica direct control system - Hydraulic system with 2 variable displacement pumps - Anniversary model GOLDEN EDITION - Thermoplastic processing - Open nozzle 35 mm - Nozzle tip radius 35 - Heating band for open nozzle - Central clamping platen set 320, Ø 125 mm - Pneumatic maintenance unit with 1 pressure regulator (1x1000 l/min) - Electric connection for blow-off device 1 on machine base - Blow-off device 2 with 3/2 valve on machine base - Selector unit, longitudinal mounting including connection - Mold clamping while safety guard is open - Programmable conveyor belt in the machine base, longitudinal - Preparation for INTEGRALPICKER V - Robot interface (according to EUROMAP 67), 50-pin - Socket combination 1CEE, 1 Schuko protected by 30mA residual-current circuit breaker type B - Basic Connectivity for additional "Connected Services" - Serial printer interface USB - CompactFlash interface for data record storage - Operator authorization with chip card according to EUROMAP 65 - Parallel connection for heating band nozzle tip or adapter - Freely configurable page for "start-up parameters" - Coloring device interface - Shut-off valve for cooling water inlet - Cooling water filter 100 µm supplied separately - 3 manually adjustable free cooling circuits - GOLDEN Automation Package with IP-V - Regulated machine cooling circuits - aXw Control Setup Bundle - aXw Control Start-Stop Bundle - ARBURG Remote Service (ARS) - Productivity package - Initial setup by ARBURG service - CD with operating instructions and spare parts list - Signage language German (DE) - Without granulate container 50 L - Without heating band for nozzle tip - Elastic machine mounting on vibration-damping mounts - Ejector plate connection safety - Quick-release coupling for ejector - Water-cooled control cabinet - Hydraulic ejector - Open-top safety device - Standard equipment packages - Machine equipped with INTEGRALPICKER - New ARBURG color scheme 5625-S356/XX-B-Z150 Centered in moving mold clamping plate 150 mm instead of 125 mm

Condition: excellent (used), Year of construction: 2020, operating hours: 4,800 h, 1x Arburg 320C 500-170 Golden Edition with Integralpicker Year of manufacture: 11/2020 Operating hours: 4,800 A total of 3 machines available! 1x Year: 2020 2x Year: 2022 Equipment: CG series 320 C 500 - 170 Thermoplastic cylinder complete, 35 mm, wear-resistant Standard screw coupling, two-flat coupling geometry Selogica direct control system Hydraulic system with 2 variable displacement pumps Anniversary model GOLDEN EDITION Thermoplastic processing Open nozzle 35 mm Nozzle tip for open nozzle Heating band for open nozzle Clamping platen set 320 central Ø 125 mm Electrical connection for blow-off device 1 on machine frame Selector unit, longitudinal installation including connection Programmable conveyor belt in machine frame, longitudinal Preparation for INTEGRALPICKER V Robot system interface (according to EUROMAP 67), 50-pin Basic Connectivity for additional "Connected Services" Printer interface, serial USB CompactFlash interface for data storage Operation authorization with chip card according to EUROMAP 65 Parallel connection for heating band nozzle tip or adapter Freely configurable page for "start-up parameters" Hnjdpfx Aeyibayeacsh Color dosing unit interface Shut-off valve for cooling water inlet Cooling water filter 100 µm included 3 manual-adjustable free cooling circuits GOLDEN Automation Package with IP-V Regulated machine cooling circuits aXw Control Setup Bundle aXw Control Start-Stop Bundle ARBURG Remote Service (ARS) Productivity package Initial commissioning by ARBURG service Instruction and training on the machine at customer's site CD operating manual and spare parts list Label language German (DE) Without granulate container 50 L Without heating band for nozzle tip Flexible machine mounting on anti-vibration elements Connection for ejector plate safety Quick-release coupling for ejector Water-cooled control cabinet Socket distributor: 1 CEE, 1 Schuko Hydraulic ejector Safety guard open at the top Standard equipment packages Machine equipped with INTEGRALPICKER New ARBURG color scheme

Year of construction: 2009, condition: ready for operation (used), Two injection molding machines are offered, year of manufacture 2008 and 2009. Clamping force: 500kN, tie bar spacing X/Y: 320mm/320mm, mold mounting plates X/Y: 446mm/446mm, opening stroke: 350mm, max. platen distance: 550mm, injection unit 170: screw diameter: 25mm-30mm, shot volume: approx. 59ccm/25mm screw, approx. 85ccm/30mm screw, shot weight: approx. 62g to 77g, injection pressure: up to 2500bar. Inspection is possible by arrangement. Hjdpox I Rqcjfx Aacsnh

Condition: excellent (used), Year of construction: 2011, clamping force: 500 kN, screw diameter: 30 mm, clearance between the columns: 320 mm, displacement volume: 85 cm³, injection pressure: 2,000 bar, injection weight: 77 g, mold height (min.): 200 mm, ejector force: 30 N, ejector stroke: 125 mm, plate height: 200 mm, General data Year of manufacture: 2011 Clamping unit Clamping force: 50 t Mould clamping system: 50/ … Platen size: 446 × 446 mm Mould height: 200 mm Opening stroke: 350 mm Maximum platen distance: 550 mm Hnjdpfx Aajyguwveceh Ejector force: 30 kN Ejector stroke: 125 mm Injection unit: … / 1350 Screw diameter: 30 mm Injection volume: 85 ccm Shot weight: 77 g Specific injection pressure: 2,000 bar

Condition: excellent (used), Year of construction: 2014, Arburg 320C 500-170 e² / Hybrid Machine Year of manufacture: 2014 Injection Unit: Screw diameter: 30 mm Shot weight: 77 g Injection pressure: 2000 bar Dosing volume: 85 ccm Clamping Unit: Clamping force: 50 t Tie bar distance: 320x320 mm Platen size: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - Touchscreen Additional equipment: Hybrid machine: energy-saving and very quiet Operating hours: 48,000 h in automatic mode Air valve x 2 Core pull control Controller with 8 hot runner zones Injection unit hardened - bimetallic Main motor of the machine: servo motor with inverter – energy-saving Proportional valve on the injection unit – for precise injection Dimensions: Weight: 2210 kg Length/Width/Height: 3.41x1.43x1.99 m All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our company in Łódź. Hnodsycr H Hopfx Aacjh Price: On request

Condition: excellent (used), Year of construction: 2011, Arburg 320C 500-170 Year of construction: 2011 Injection unit: Screw diameter: 35 mm Injection weight: 105 g Injection pressure: 1470 bar Metering volume: 115 ccm Clamping unit: Clamping force: 50 t Distance between tie bars: 320x320 mm Size of the clamping platens: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Hedpfx Asycr Dlsacsnh Control system: SELOGICA touchscreen Additional equipment: Operating hours: approx. 35,000 h in automatic mode Control system with air valve Core pull control Hardened injection unit - bimetal Proportional valve on the injection unit - precise injection Original Demag mold crane: chain, electrically controlled, 2 lifting speeds Dimensions: Weight: 2310 kg Length/width/height: 3.41x1.47x1.99 m Drive: Pumps/motor: 11 kW Heating output: 9.4 kW Total output: 20.4 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2006, Arburg 320C 500-170 with the Wittmann W811 robot Year of construction: 12/2006 Hnedpfx Aeycr A Ioacsh Injection unit: Screw diameter: 30 mm Injection weight: 77 g Injection pressure: 2000 bar Dosing volume: 85 ccm Clamping unit: Clamping force: 50 t Distance between tie bars: 320x320 mm Size of the clamping platens: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA touchscreen Additional equipment: Euromap 67 Robot interface Air valve x 1 Hydraulic core pull x 1 Hardened injection unit - bimetal Proportional valve on the injection unit - precise injection Built-in sorting flap Robot Wittmann W811 Year of construction: 2010 4-axis robot: 3 axes are driven by servomotors (electric); axis C - pneumatic Travel in axes: X-420, Y-1200, Z-1500 Touch control panel The safety package for robots Robot with adapter, protective housing Purchase of the robot for an additional charge Dimensions Weight: 2400 kg Length/width/height: 3.41x1.47x1.99 m Drive: Pumps/motor: 11 kW Heating output: 9.4 kW Total output: 20.4 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: like new (used), Year of construction: 2015, Arburg 320 C 500-170 (2015) Golden edition Working hours : 40.167 h Clamping force: 50 t Screw diameter : 30 mm Clamping force: 500 kN Distance between tie bars: 320 × 320 mm Platen size (H × V): 446 × 446 mm Minimum mould height: 200 mm Maximum daylight opening: 550 mm Ejector stroke: 125 mm Screw diameter: 30 mm Maximum shot volume: 85 cm³ Maximum shot weight (PS): 77 g Injection pressure: 2000 bar Screw speed max: 400 r/min Nozzle stroke: 250 mm Nozzle contact pressure: 40.6 kN Heating capacity: 9.4 kW Pump drive power: 11 kW Total installed power: approx. 20.5 kW Machine length: approx. 3.4 m Machine width: approx. 1.4 m Machine height: approx. 2.0 m Machine weight: approx. 2 400 kg 2 pumps machine Machine Equipment / Configuration Control system: Selogica Direct controller Hydraulic system: Dual-pump hydraulic system Hjdpoxqdxiefx Aacenh Injection Unit Thermoplastics injection unit, 30 mm screw, high wear resistant design Standard screw coupling with flat-ended geometry Open nozzle, 30 mm Nozzle tip for open nozzle Heater band for open nozzle Clamping Unit Mounting platen set, central diameter 125 mm Core pull 1, for serial movement, holding pressure via check valve Interfaces & Connectivity Robot interface EUROMAP 67 (50-pin) Interface for electrical safety interlock on safety door EUROMAP 73