Plate Shear - Hydraulic

ATLANTIC ATS 3000

Condition: good (used), Year of construction: 2003, machine/vehicle number: A 10371, Offer 25448 Technical Data: - Max. working width: 3050 mm - Max. cutting capacity (St 40): 0.5 – 6 mm - Cutting angle adjustable (motorized): 0.5 – 3° - Blade gap adjustment: manual - Number of hydraulic hold-downs: 18 pcs - Motorized backgauge with SP8 positioning control: 10 – 750 mm - Strokes per minute (depending on cutting angle and length): 9 – 17 strokes/min - Hydraulic drive: 400 V / 7.5 kW - Table height: 770 mm - Space requirement incl. backgauge, w/o front support arms: approx. W 3750 x H 1600 x D 2450 mm - Weight: approx. 4500 kg Includes: - Electric foot switch - Cutting line illumination Lhodpfx Acox I I Uxs Her - Angle gauge - 2 support arms - Rear area protection with side guard and light curtain

Year of construction: 2023, condition: new, ! Offers for customers from Baltic states only: Lithuania, Latvia, Estonia. Guillotine RAPIDO is fast reliable shearing machine. Depends on sheets length there are guillotines with different working lengths available: 1300 mm / 2600 mm / 3200 mm / 4100 mm. Machine can do up to 35 cuts per minute. The drive system with eccentrics, pulldown rods, and hold down system which can be positioned as close as 2.5 cm from the knives allow for easy and expedient trimming of narrow strips. RAPIDO guillotine shear is equipped with squaring arms on both sides and the LED cutting line light. Available working lengths: 2600 mm / 3200 mm / 4100 mm Lhodpfx Acoixz D Uo Her

Condition: used, sheet thickness: 6motor: 10messurements (LxWxH): 3750 x 1600 x 2450sheet length: 3050weight approx.: 4800 Description: Hydraulic Shearing Machine ATLANTIC ATS 3000 Used Machine - Sheet width: 3050 mm - Sheet thickness: 6.0 mm - Sheet thickness for stainless steel: 4.0 mm - Cutting angle: 0.5 - 3.0° - Hold-downs: 18 pieces - Stroke rate: 9 / 14 strokes/min - Rear gauge - adjustable: max. 750 mm - Control: Conventional - Motor power: 10.0 kW - Weight: 4800 kg - Dimensions L-W-H: 3750 x 1600 x 2450 mm - Condition: Well-maintained Features: - Electro-hydraulic / cam-guided sheet metal shear - Front control panel, left side - easy to operate - With electro-hydraulic cutting angle adjustment - Manual cutting gap adjustment, from the rear - Electro-motorized rear gauge 10-750 mm Ljdpeu Uwyysfx Ac Hjhr - With analog position indicator + handwheel for fine adjustment - 1x robust side stop - 1x movable footswitch - Front finger/entry guard - 2x emergency stop buttons at the front

Condition: used, Year of construction: 1998, sheet width 3050 mm plate thickness 6 mm rear stop 10 - 750 mm cutting angle 0,5 - 3 ° down holder 18 Stk no. of strokes 9 / 14 Hub/min total power requirement 7,5 kW dimensions of the machine ca. 3750 x 1600 x 2450 mm Lodpsw S Nknefx Ac Hohr weight 4800 kg Features: - Electro-hydraulic, slide-guided sheet metal guillotine shears - Front control panel, front left - With electro-hydraulic cutting angle adjustment - With manual cutting gap adjustment, from the front (eccentric) - Electric motor rear stop 10-750 mm (ball screws) - With analog position display + hand wheel for fine adjustment - 1x side stop - 3x support arms - 1x freely movable foot switch - Front finger guard - Operating instructions (PDF)

Condition: good (used), Year of construction: 2007, machine/vehicle number: 6085074953, Offer 24169 Technical data: - max. working width 4050 mm - max. cutting capacity St 40 13 mm - Cutting gap adjustment by hand - Number of hydraulic hold-down devices 18 pcs - Motorized backgauge positioning control 20 - 1000 mm - Front angle fence + support arms - Stroke rate depending on cutting angle and cutting length 7 15 per/min - Hydraulic drive 400 V / 30 kW - Space requirement incl. back gauge, without front support arms - approx. W 5400 x H 2250 x D 2250 mm - Weight approx. 16000 kg - with: - electric foot - switch - cutting line lighting - - cutting length preselection - rear of machine with light barrier safety device Lhedpfx Ajtrw Hmjc Her

Condition: used, Year of construction: 1990, Hydraulic Guillotine Shear Manufactured by ATLANTIC, Type ATS 3012 Year of Manufacture: 1990 Technical Specifications Manufactured by ATLANTIC Type ATS 3012 Year of Manufacture: 1990 Sheet Size: 3000 x 12 mm Cutting Angle Adjustment: 0.5 – 3 degrees Number of Hold-Down Clamps: 18 Length of Angle Stop: 1000 mm Working Height: 900 mm Motor Power: 22.5 kW Dimensions: Approx. L 4.20 x W 2.00 x H 2.20 m Weight: Approx. 8 t Features • Angle Stop • Manual Cutting Gap Adjustment • Automatic Cutting Angle Adjustment • Motorized Backgauge with Fine Adjustment Lhsdowif I Eopfx Ac Hsr All information is subject to change without notice. A demonstration is available at any time in our showroom.

Condition: used, Year of construction: 1987, sheet width 3050 mm plate thickness 6.0 mm Lhedpfexab Aqjx Ac Her thickness at "Niro-steel" 4.0 mm cutting angle 0.5 - 3.0 ° down holder 18 Stück no. of strokes 9 / 14 Hub/min back stop - adjustable max. 750 mm Control konv. engine output 10.0 kW weight 4800 kg range L-W-H 3750 x 1600 x 2450 mm maintained condition (!!) Furnishing: - electro-hydraulic / slide-guided sheet metal shears - front control panel, left - easy to use - with electro-hydraulic cutting angle adjustment - with manual cutting gap adjustment, from the rear - electro-motorized back gauge 10-750 mm - with analogue position display + handwheel for fine adjustment - 1x robust side stop - 1x freely movable foot switch - front finger/encroachment protection - 2x EMERGENCY stop buttons at the front - User manual (PDF)

Condition: excellent (used), Year of construction: 2012, Trumpf Trushear 5063 (2012) Guillotine Shear 3050x6mm Manufacturer: Trumpf Model: TruShear 5063 Year of manufacture: 2012 Condition: used, very good Control: ELGO P50 Cutting length: 3050 mm Sheet thickness: 6 mm / 4 mm for stainless steel Cutting angle: 0.5 – 2.8° Blade gap adjustment: 0.05 – 0.72 mm Automatic cutting angle adjustment Automatic blade gap adjustment Automatic blade gap compensation Hold-down devices: 20 pieces Strokes per minute: 18 – 38 Backgauge: 10-1000 mm, adjustable Total power requirement: 11 kW Oil capacity: 140 L Dimensions (approx.): L 4.00 x W 1.67 x H 1.90 m Lhjdpfxexrv Apj Ac Hjr Total weight: approx. 7.2 t Customs tariff number: 84615090 Sheet support device Sheet return device Small parts chute 3x support arms Light barrier Foot pedal Documentation

Condition: reconditioned (used), functionality: fully functional, Year of construction: 1995, machine/vehicle number: 95G412, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Cybelec, controller model: CybTouch 8, working width: 4,100 mm, cutting angle (min.): 0.3 °, cutting angle (max.): 154 °, sheet thickness (max.): 8 mm, sheet thickness aluminum (max.): 8 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 4 mm, back gauge adjustment: CNC-controlled, back gauge: 1,000 mm, power: 11 kW (14.96 HP), input voltage: 400 V, input current: 400 A, input frequency: 60 Hz, type of input current: three-phase, oil tank capacity: 220 l, overall weight: 10,500 kg, total length: 4,720 mm, total width: 3,060 mm, total height: 1,880 mm, number of support arms: 4, warranty duration: 2 months, year of last overhaul: 2025, Equipment: documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, Hydraulic guillotine shear with variable angle controlled by CT8 Manual blade gap adjustment Retrofitted with new CT8 Cybelec CNC controller Refreshed paintwork Motorized backgauge controlled by CT8 Lhodpfsxal Idjx Ac Her Front safety with light curtain (finger protection, 14 mm) Rear light curtain available as an option Overhauled pump and hydraulics Squaring arm + 4 front support arms