Compressor

Atlas Copco GA 15 FF

Year of construction: 2018, condition: used, Compressor system Manufacturer: Atlas Copco Type: GA15VSD+FF Year of manufacture: 2018 Technical data Note: Nledpfszu Al Ajx Agrsg The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is not binding.

Year of construction: 1990, condition: good (used), Compressor system with air dryer and compressed air tank. Length: 800mm Width: 800mm Height: 1000mm Volume: 1.5m³/min Power: 11kW Nedpfjinur Asx Agrslg

Condition: used, Year of construction: 2004, Compressor type: Oil-injected rotary screw compressor with integrated refrigerant dryer Motor power: 15 kW (20 HP) Power supply: 380 V / 50 Hz Operating pressure: 7.5 bar Free Air Delivery (FAD): 798 m³/h (approximately 13.3 m³/min) Noise level: 68 dB(A) Tank capacity: 400 liters Nlodpfxewgca Tj Agrjg Dimensions (L × W × H): 1,000 × 660 × 1,400 mm Weight: 450 kg Cooling: Air-cooled Integrated dryer: Yes Control system: Elektronikon®

Year of construction: 2010, condition: like new (used), 20m³ OFFLINE - FLUORINATION Fluorination of plastic surfaces with reactive gases for permeation reduction The technology used is suitable for treating surfaces of plastic fuel tanks (PFT) with the help of fluorine gas mixture (10% F2/N2) and changing the surface properties in such a way that a desired reduction of permeation of fuels from the PFT into the environment and thus the emission of fuel vapors is significantly reduced. Technical data: Vacuum chamber (capacity): 20 m3 Process time, individual: (approx. 2.5 hrs.) Chamber temperature, jacket: 90 - 100 °C Products introduced: Fuel tank and accessories Material: stainless steel 1.4301 and similar Min. vacuum pressure: 1 mbar (a) Process pressure : 350 - 700 mbar (a) Nitrogen inlet pressure : 15 bar(g) F2/N2 inlet pressure : 150 bar, alternatively 100 bar Gas mixture 1 10% F2 in N2 Gas mixture 2 20% F2 in N2 as gas mixture MAK values H, HH 0.1 ppm F2, 0.2 ppm F2 Supply voltage 400 V Frequency 50 Hz Connected load, max. 200 kW Back-up fuse 150 A The fluorination plant consists of the following components: - A treatment chamber (20m3), into which the plastic material to be fluorinated can be placed in material baskets/boxes suitable for this purpose, - A bundling station for fluorine-nitrogen mixtures Bottle bundles of 12x50 liters for 10% F2/N2 at 150 bar and 20% F2/N2 mixtures at 100 bar, - Amature panel for nitrogen supply of the process flow, - Vacuum pumping station in a container, for conditioning and disposal of the treatment chamber - Heating system for temperature control of the treatment chamber - Control cabinet with a programmable logic controller S7/ WIN CC7 - Operator control station for process monitoring, process parameter setting and the visualized plant picture, as well as the trend control, the error message system, the protocol output, - Al2O3 absorber (silo) Dimensions: Lower unit: vacuum chamber heated, with control cabinet. Nodpfx Agjid Ngdorslg length: 7500mm width: 2850mm height: 2380mm weight approx. 12.000 Kg Upper unit: pump chamber Length: 4100mm width: 2850mm height: 3000mm Weight approx. 5.000 Kg