Screw Compressor GA160VSD+FF Premium

Atlas Copco GA160VSD+FF

Condition: excellent (used), Year of construction: 2014, PROD. ATLASCOPCO TYPE GA160VSDFF S/N APF195117 YEAR 2014 POWER (kW) 186 CAPACITY (m3/min) 4.82-26.70 DISCHARGE PRESSURE (bar) 8.3 HOURS (RUNNING/TOTAL) 67773 FREQUENCY CONVERTER yes BUILT-IN DRYER yes AFTERCOOLER no COOLED BY (AIR/WATER) air Nlsdpfxezl S Smj Abzed WITH TANK no DOCUMENTS no CONNECTION 3 NEW/USED USED

Condition: excellent (used), Year of construction: 2004, operating hours: 114,000 h, overall weight: 4,400 kg, power: 250 kW (339.91 HP), volume flow: 2.802 m³/h, operating pressure: 10 bar, Regularly serviced, in excellent condition. Atlas Copco ZR250 Screw compressor, 10bar 46m3/min Oil-free, water-cooled. MD600 with adsorption dryer Compressor: Manufacturer: Atlas Copco Type: ZR 250 year of manufacture. 2004 loaded operating hours 114,000 Max. operating pressure: 10bar single-stage drive Cooling water consumption 3.7 liters/s Air delivery: 43.6m3/min Water cooled Oil free Power: 250 kW Mains voltage: 400v 50Hz 445A Last service: September 2023 Adsorption dryer, water-cooled Manufacturer: Atlas Copco Type: MD 600 W Nledpfx Aborp D Uxozsd Year of construction: 2004 Max. operating pressure: 10.5 bar Empty volume: 350 liters machine dimensions: length: 3000mm width: 1600mm height: 2000mm weight: 4400 kg

Condition: like new (used), Year of construction: 2021, operating hours: 23,369 h, functionality: fully functional, Screw Compressor Atlas Copco GA160VSD+FF Premium Inverter and dryer integrated. 160 kW 8.30 bar 33.10 m3/min Year of manufacture: 2021 Operating hours: 23,369 Nsdpfx Abeyzgtyezjld

Condition: used, Year of construction: 2013, Overview  This low-pressure air compressor was manufactured in 2013 by the Swedish company Atlas Copco, a global leader in industrial compressed air systems. The GA132 VSD model delivers up to 24.1 m³/min of air at a maximum pressure of 8.5 bar. The unit remains installed and connected, is in excellent operating condition, and is immediately available. The annual maintenance was completed in August 2025, and spare parts are included. An Atlas Copco air dryer can also be provided upon request. Technical data  - Operating Pressure: 7–8.5 bar - Air Capacity: 24.1 m³/min Nlsdpfxjyb Thvj Abzed - Power Supply: 132 kW - Weight: 4,075 kg - Condition: Excellent, annual maintenance completed August 2025 - Optional equipment: Atlas Copco air dryer available - Status: Installed and connected, fully functional

Year of construction: 2018, condition: like new (used), functionality: fully functional, MACCHI COEXTRUSION LINE FOR 7-LAYER EVOH BLOWN FILM Complete line for the production of 7-layer EVOH blown film 4 Macchi extruders with 65 mm screw diameter 3 Macchi extruders with 55 mm screw diameter Innoplast gravimetric dosing units Nsdpsy Nk Haefx Abzold 7-layer die head, 450 mm diameter with IBC, 2.4 mm GAP K-Design cooling ring Double thickness control IR+XRay Maximum width 2400 mm Calibration basket Rotating haul-off Cason corona treater Macchi BO-Plus double back-to-back automatic winder Web guide Year 2018

Condition: excellent (used), Year of construction: 2018, operating hours: 34,656 h, functionality: fully functional, Second hand Atlas Copco GA250VSD, year of manufacture 2018, approximately 34,656 operating hours. 10 bar with 44.90 m3/min. 250 kW. Nljdpfxsw Ewd Rj Abzed

Condition: excellent (used), Year of construction: 2017, operating hours: 28,625 h, functionality: fully functional, Premium screw compressor Atlas Copco GA90+. Nlsdpfsuqanajx Abzod 90 kW, 8.5 bar with 16.50 m3/min. Only 28,625 operating hours. With heat recovery, new compressor oil and new oil filters.

Condition: good (used), Year of construction: 2014, functionality: fully functional, cooling capacity: 449 kW (610.47 HP), type of input current: three-phase, type of cooling: water, overall weight: 2,474 kg, input voltage: 400 V, total width: 980 mm, total length: 3,280 mm, total height: 1,820 mm, warranty duration: 6 months, Watercooled chiller CARRIER 30HXC130 A0671 PE 449 kW Nljdpfey Tiu Dox Abzsd Cooling capacity: 449 kW / 127.67 tons (12/7 - 30/35°C) Year of manufacture: 2014 Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Compressors: 1 pcs. Carlyle 06NW2209S7NC.A00 (screw) + 1 pcs. Carlyle 06NW2250S7NC.A00 (screw) Type of refrigerant: R134a Dimensions: 3.28x0.98x1.82 m. Weight: 2474 kg. Working hours: 3280/760 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: used, Year of construction: 2022, operating hours: 2,600 h, Equipment: all wheel drive, Caterpillar M318 Engine: Cat C4.4 – Power (ISO 14396): 129 kW / approx. 176 HP – Displacement: 4.4 l – Cylinders: 4 – Emissions: EU Stage V Travel performance Max. speed: up to approx. 35 km/h * Drive: hydrostatic travel drive Nsdpfsyv Uh Usx Abzjld * Steering: all-wheel steering with oscillating axle Tank & Hydraulics Diesel tank: approx. 350 liters * Hydraulic system: load-sensing hydraulics with multiple auxiliary circuits for attachments Air conditioning Only 2,600 operating hours and in very good condition

Year of construction: 2012, condition: used, This Macchi 3-layer blown film co-extrusion line is designed for the production of high-quality polyethylene films with outputs of up to 800 kg/h. The line processes LDPE, LLDPE, MLDPE, and HDPE and is suitable for manufacturing collation shrink film, gusseted shrouds, stretch hood film, tubing, and sheeting. Materials to be processed: LLDPE/LDPE/LLD/HDPE Extruders: 65 mm + 80 mm + 65 mm Nledpfx Abozkru Eezod Infrared heaters 3 pcs plate filters Head: 3-layer blown film die head TE5303-IBC-350/500 Die diameter: 350 and 400 mm IBC Die gap: 1.8 mm Output: Up to 800 kg/hour, depending on the material formulation Air ring: Dual-flow air ring, carbon fiber Take-off: Take-off unit, 2400 mm wide Oscillating nip rollers Motorized side gusseting Rewinder: Double winder, fully automatic back-to-back rewinder Winder, fully automatic roll change Reel diameter up to 800 mm Winding width 2350 mm Accessories: Tower Web guide, E&L Gravimetric weight control system, Piovan/Doteco Component blender, Shini Dosing units, Doteco Automatic thickness control, Kundig K-Design profile gauge control system Calibrating basket Corona treater, Martignoni Air shafts, 8 pcs