Screw compressor GA250

Atlas Copco GA250

Condition: excellent (used), Year of construction: 2016, operating hours: 54,737 h, functionality: fully functional, power: 250 kW (339.91 HP), volume flow: 2,502 m³/h, pressure (max.): 8.5 bar, Screw compressor GA250 250 kW 8.5 bar Ksdpsz Dtvnsfx Akwsdt 41.70 m3/min Year of manufacture: 2016 Operating hours: 54,737 h

Year of construction: 2018, condition: like new (used), functionality: fully functional, MACCHI COEXTRUSION LINE FOR 7-LAYER EVOH BLOWN FILM Complete line for the production of 7-layer EVOH blown film 4 Macchi extruders with 65 mm screw diameter 3 Macchi extruders with 55 mm screw diameter Innoplast gravimetric dosing units 7-layer die head, 450 mm diameter with IBC, 2.4 mm GAP K-Design cooling ring Kjdpjy Nk Haofx Akwodt Double thickness control IR+XRay Maximum width 2400 mm Calibration basket Rotating haul-off Cason corona treater Macchi BO-Plus double back-to-back automatic winder Web guide Year 2018

Condition: excellent (used), Year of construction: 2018, operating hours: 34,656 h, functionality: fully functional, power: 250 kW (339.91 HP), volume flow: 2,694 m³/h, pressure (max.): 10 bar, type of cooling: air, Equipment: refrigerant dryer, type plate available, Second hand Atlas Copco GA250VSD, year of manufacture 2018, approximately 34,656 operating hours. 10 bar with 44.90 m3/min. 250 kW. Ksdsw Ewd Rjpfx Akwedt

Condition: repair required (used), Year of construction: 2007, functionality: not functional, power: 250 kW (339.91 HP), volume flow: 2,256 m³/h, pressure (max.): 9.75 bar, type of cooling: air, Equipment: refrigerant dryer, type plate available, Screw compressor Atlas Copco GA250FF Dryer integrated 250 kW Kodpfx Akezhu Najwsdt 9.75 bar 37.80 m3/min Year of manufacture: 2007 Main motor defective Price: 9,000 EUR

Condition: excellent (used), Year of construction: 2004, operating hours: 114,000 h, overall weight: 4,400 kg, power: 250 kW (339.91 HP), volume flow: 2.802 m³/h, operating pressure: 10 bar, Regularly serviced, in excellent condition. Atlas Copco ZR250 Screw compressor, 10bar 46m3/min Oil-free, water-cooled. MD600 with adsorption dryer Compressor: Manufacturer: Atlas Copco Type: ZR 250 year of manufacture. 2004 loaded operating hours 114,000 Max. operating pressure: 10bar single-stage drive Cooling water consumption 3.7 liters/s Air delivery: 43.6m3/min Water cooled Oil free Power: 250 kW Mains voltage: 400v 50Hz 445A Last service: September 2023 Adsorption dryer, water-cooled Manufacturer: Atlas Copco Type: MD 600 W Year of construction: 2004 Max. operating pressure: 10.5 bar Empty volume: 350 liters machine dimensions: length: 3000mm width: 1600mm height: 2000mm Kdedpferp D Uxox Akwot weight: 4400 kg

Condition: used, Full container of used electric screw compressors for export. Container loading included in the price. Kedpfx Aksw Imvyowsdt

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, cooling capacity: 553 kW (751.87 HP), type of cooling: air, aircooled Chiller Carrier 30RBP 550R Cooling cap.553 KW (162 refr.tons) 2 circuits with each 4 scroll compressors Plate evaporator, with integrated pump R 32 Kodpfxoznb Rkj Akwjdt tested,ready for operation

Condition: excellent (used), Year of construction: 2017, operating hours: 28,625 h, functionality: fully functional, power: 90 kW (122.37 HP), volume flow: 990 m³/h, pressure (max.): 8.5 bar, type of cooling: air, Premium screw compressor Atlas Copco GA90+. 90 kW, 8.5 bar with 16.50 m3/min. Only 28,625 operating hours. Kdsdouqanaspfx Akwot With heat recovery, new compressor oil and new oil filters.

Year of construction: 2012, condition: used, This Macchi 3-layer blown film co-extrusion line is designed for the production of high-quality polyethylene films with outputs of up to 800 kg/h. The line processes LDPE, LLDPE, MLDPE, and HDPE and is suitable for manufacturing collation shrink film, gusseted shrouds, stretch hood film, tubing, and sheeting. Materials to be processed: LLDPE/LDPE/LLD/HDPE Extruders: 65 mm + 80 mm + 65 mm Infrared heaters 3 pcs plate filters Head: 3-layer blown film die head TE5303-IBC-350/500 Die diameter: 350 and 400 mm IBC Die gap: 1.8 mm Output: Up to 800 kg/hour, depending on the material formulation Air ring: Dual-flow air ring, carbon fiber Take-off: Take-off unit, 2400 mm wide Oscillating nip rollers Motorized side gusseting Rewinder: Double winder, fully automatic back-to-back rewinder Winder, fully automatic roll change Reel diameter up to 800 mm Winding width 2350 mm Accessories: Tower Web guide, E&L Gravimetric weight control system, Piovan/Doteco Component blender, Shini Dosing units, Doteco Automatic thickness control, Kundig Ksdpfx Akszkru Eswedt K-Design profile gauge control system Calibrating basket Corona treater, Martignoni Air shafts, 8 pcs

Condition: like new (used), Year of construction: 2021, operating hours: 25,495 h, functionality: fully functional, Screw compressor Atlas Copco GA160VSD+FF. Integrated dryer and frequency converter. 160 kW, 8.3 bar, 33.10 m³/min. Year of manufacture: 2021. Operating hours: 25,495. Ksdpjyzg Eiofx Akwodt