Screw compressor

Atlas Copco GA30+

Year of construction: 1994, condition: ready for operation (used), A small compressor system including separator and dryer is available. 1) Compressor Atlas Copco GA 18, year of manufacture: 1994, air volume flow: 36.4l/s, max. operating pressure: 10bar, motor power: 18.5kW, speed: 1500rpm. 2) Air dryer Schneider Druckluft GmbH DK 3000 N, max. inlet temperature: 50°C, max. operating pressure: 16bar, refrigerant: R134a, refrigerant charge: 700g, operating overpressure: 17bar. 3) Oil-water separator Donaldson Ultrasep Plus 30, max. residual oil content: 10mg/l, max. compressor capacity: 30m³/min, oil adsorption capacity: 25l, machine dimensions X/Y/Z: approx. 900mm/1000mm/400mm, weight: approx. 70kg. An on-site inspection is possible. Lhsdpfx Ajx Ih D Tjgdsd

Year of construction: 2007, condition: ready for operation (used), Three Atlas Copco compressors are available. 1) Atlas Copco GA 37 VSD, year of manufacture: 2007, air flow rate: 7.25m³/min, max. operating pressure: 12.8bar, power: 37kW, refrigerant: R404a, weight: approx. 1200kg, operating hours: approx. 120844h. 2) Atlas Copco GA 50 VSD, year of manufacture: 2003, max. operating pressure: 13bar, air flow rate: 9.18m³/min, power: 50kW, refrigerant: R404a, weight: approx. 1300kg, operating hours: approx. 159308h. 3) Atlas Copco GA 30, year of manufacture: 2003, air flow rate: 5.34m³/h, max. operating pressure: 8bar, power: 30kW, refrigerant: R404a, weight: approx. 1000kg, operating hours: approx. 29700h. Documentation available. An on-site inspection is possible. Ledjyn Nzxepfx Agdshd

Condition: excellent (used), Year of construction: 2011, MANUFACTURER: ATLAS COPCO MODEL: GA30VSDFF S/N: API431056 YEAR: 2011 POWER (kW): 30 CAPACITY (m3/min): 5.58 PRESSURE (bar): 12.80 OPERATING HOURS (DOC/TOTAL): 33,313 FREQUENCY INVERTER: yes Lhjdpfx Agoylyz Dsdjd INTEGRATED DRYER: yes HEAT EXCHANGER: no COOLING (AIR/WATER): air

Condition: excellent (used), Year of construction: 2014, operating hours: 4,293 h, MANUFACTURER ATLAS COPCO MODEL GA30FF S/N API325798 YEAR 2014 POWER (kW) 30 OUTPUT (m3/min) 5.4 PRESSURE (bar) 7.25 HOURS (DOC/TOTAL) 4293 FREQUENCY INVERTER no INTEGRATED DRYER yes, R134a 0.54kg Lhjdpjylwlmofx Agdjd HEAT EXCHANGER no COOLING (AIR/WATER) air ON RECEIVER TANK no

Condition: used, Year of construction: 1998, operating hours: 30,559 h, functionality: fully functional, overall weight: 825 kg, power: 30 kW (40.79 HP), fuel type: electric, volume flow: 312 m³/h, operating pressure: 8 bar, pressure (max.): 8.5 bar, noise level: 70 dB, Equipment: documentation/manual, refrigerant dryer, type plate available, ❇️ Atlas Copco GA30 FF Screw Compressor – 30 kW, 8.5 bar, Excellent Maintenance For sale is a used but exceptionally well-maintained industrial screw compressor from the premium manufacturer Atlas Copco, model GA30 FF with integrated refrigeration dryer. The unit was built in 03/1998, has received regular servicing, and was in reliable operation until February 2022. ⸻ ❇️ Technical Data • Model: GA30 FF (with integrated refrigerant dryer) • Year of manufacture: March 1998 • Motor power: 30 kW (approx. 40 HP) • Max. operating pressure: 8.5 bar (factory specification) • Free air delivery (FAD): approx. 5.2 m³/min (≈ 312 m³/h) • Connection: 400 V / 50 Hz / 3~ (5-pin) • Fuse protection: 3 × 63 A • Operating hours (at last service): 30,559 h • Weight: approx. 800–850 kg ⸻ ❇️ Maintenance & Condition The compressor was last professionally serviced by DF Druckluft-Fachhandel GmbH on 14.02.2022 with the following parts replaced: • Oil plug • Solenoid valve • Intake regulator kit Since then, the unit has not been operated. It was immediately prepared for decommissioning after servicing and is therefore in ready-to-operate condition. The compressor was stored dry and protected indoors. ⸻ ❇️ Features & Equipment • FF model: integrated refrigeration dryer for dry compressed air – ideal for sensitive applications such as spray painting or control air technology • Elektronikon® controller – user-friendly control panel with operating data storage • Sound insulation enclosure (industrial version) • Steel housing – transportable by pallet truck or forklift ⸻ ✅ Ideal for Workshops · Production facilities · Metal and woodworking · Tire services · Sandblasting · and much more ⸻ ❇️ Location & Loading Lsdpfxsykk Rae Agdohd • Location: 71083 Herrenberg (near Stuttgart) • On-site loading assistance available (forklift on site) • Inspection by arrangement is welcome ⸻ ❇️ Price & Contact Price: €3,490 (final price) No VAT will be charged according to §19 UStG. ———— ‼️ Please also check my other listings. It’s worth it! Viewing and collection in 71083 Herrenberg. ⚠️ Shipping (by freight forwarding) or delivery possible at buyer’s expense.

Condition: excellent (used), Year of construction: 2006, MANUFACTURER: ATLAS COPCO MODEL: GA30VSDFF Lhodpfx Aoyifb Iogdsd SERIAL NO.: API422341 YEAR: 2006 POWER (kW): 30 CAPACITY (m³/min): 4.58 PRESSURE (bar): 12.80

Condition: excellent (used), Year of construction: 2016, MANUFACTURER: ATLAS COPCO MODEL: GA30VSDFF PLUS S/N: API830397 Year: 2016 Power (kW): 30 Output (m3/min): 5.84 Pressure (bar): 12.75 Operating hours (documented/total): Frequency inverter: yes Lhedpfxoyh Ugks Agded Built-in dryer: yes, R410a 1.1kg

Condition: ready for operation (used), An inspection is possible. Lhjdpfsn D Hbnsx Agdjd

Condition: good (used), Year of construction: 2008, MANUFACTURER: ATLASCOPCO MODEL: GA30 PLUS Serial Number: API595399 Year: 2008 Power (kW): 30 Capacity (m3/min): 4.8 Lhjdpjyhn R Sjfx Agdjd Pressure (bar): 10 Operating hours (documented/total): Frequency inverter: no Built-in dryer: no Heat exchanger: no Cooling (air/water): air

Condition: good (used), Year of construction: 2002, machine/vehicle number: AII271328, overall weight: 560 kg, volume flow: 297 m³/h, pressure (max.): 7.5 bar, Equipment: refrigerant dryer, type plate available, ATLAS COPCO GA30FF Technical data : S/N :AII271328 YEAR: 2002 CAPACITY (kW): 30 OUTPUT (m3/min): 4.95 CIS (bar): 7.5 INVERTER: no BUILT-IN DRYER: yes Lhodjvr D N Uopfx Agdsd EXCHANGER :no COOLED (AIR/WATER): air ON TANK :no