AVR Ceres-440-690990

AVR Ceres-440-690990

Comes complete with the following features (and options):
Bdsdpfx Aij Aguxno Toi
- 75 cm
- Front furrowers for seedbed preparation or pre-shaped ridges (e.g., Multivator)
- Depth adjustment wheels; toolbar adjustable via spindle from the outside of the machine
- Cups Ø 40-80mm (yellow) (34 cups per belt) instead of Ø 30-60mm
- Insert cups Ø 28-45mm (blue) for cups Ø 40-80mm
- Hydraulic tipping hopper (4x75: 1900kg)
- Automatic tipping hopper with 2 ultrasonic sensors
- Covering hood with:
3 tilling teeth (depth adjustable)
small ploughs on the left and right outer sides
High-Speed wear plates (top width 22.5 cm) (angled section made of boron (6mm) with Rilsan coating)
5 tillers in the covering hood
With pressure control via accumulator (+ pressure gauge) (4x75)
- PDC, Proportional Distance Control: automatically controls the covering hood/ploughs via 2 ultrasonic sensors
- Row guidance system, hydraulic on covering hood/plough grid rollers
- Spring tines instead of fixed tillers behind the covering hood
- Extension edges for Startec granular spreader (+2*20L = 2*50L total capacity)
- Startec granular spreader (2*30L) with:
speed-dependent application
adjustable dosage from the display
dosing unit with screw (dia 29 mm), (range approx. 10 – 40 L/ha) (up to 10km/h) (Recommended for use with starter fertilizers)
- 1 Display (9.0" TFT monitor for a maximum of 4 cameras)
- 3 Color cameras: between seed element 1-2 and 3-4; rear
- LED work lights: 2 units
- Activation of ISOBUS Section Control (row stop) (TC-BAS + TC-SC) (=Task Controller Basic & section control)

The Ceres 440 is a four-row, mounted precision planter (hydraulic or mechanical), with ISOBUS control and a row-independent hydraulic drive.

Strengths:
- Section control (TC-SC) or variable planting possible
- Large serrated covering discs
- Smooth accessibility and precision of the tillage system
- AVR Connect coupling possible

Standard equipment includes:
- 4 Wheels (10.00/80-12) rear, with tractor tread pattern
- Hydraulically driven planting elements (hydro-motor per row)
- Planting distance per row adjustable (++ / -- relative to the reference value), e.g., to plant rows next to the spraying path closer together
- Row stop system 1-2-3-4 (motors can be switched off per row)
- Toolbar with fixed front furrowers suspended in a parallelogram, with 2 depth adjustment wheels
- Depth adjustment wheels, toolbar adjustable via pin-hole connection
- Movable bottom, driven together with the planting element, 2 intensities, can be switched off per row
- Laterally adjustable, sprung, serrated covering discs (Ø 510mm)
- Planting elements with large drive drum (Ø 270mm), small guide roller (Ø 60mm) for precise planting at high speed
- Planting channel mounted at a 20° angle for precise placement
- 40 Cups per planting element (2 x 20) (Ø 30-60mm) (green cup)
- Planting distance 10-100 cm. Controlled via speed sensors in wheel and per planting element
- Missed seed control via sensors in the planting element
- Electric shaking system, speed adjustable from the tractor
- Mechanical fine adjustment of electric shaker per row
- Fixed hopper (width 4x75 = 3.2m - capacity 1500kg)
- ISOBUS compatible:
Minimum terminal requirements:
- Touch interface
- Resolution 480 x 480 pixels
- ISO VT Level 3 ( = AEF UT 2.0 )
- Joystick functions (ISOBUS AUX-N compatible): row stop 1-4; macro start / stop; if applicable: tipping hopper / markers / covering hood / spraying path system
- Machine supplied with emergency stop box + joys

The listing was translated automatically. Translation errors are possible.