AVR Cobra-80-17-690958

AVR Cobra-80-17-690958

Tow hitch with double lip, easy to disassemble
PU swivel support wheels for transport
Teds Agun Tjpfx Ai Tod
Swivels on the tires: (285/70-R19.5)
* both hydraulically driven, with disengagement for free-wheeling during transport
* wheels move from transport to swivel positions by means of a hydraulic cylinder
Jack (Ø 280mm)
Rubber funnel
Rubber conveyor belt supported by rollers in a trough shape
Chevron profile (15mm) with good conveying effect for potatoes
'Following' side walls
Drive by means of 2 VanderGraaf drum motors (2 x 4kW)
Drum motors with slight bulge & covered on the drum
Automatic steering system for the belt
Scraper on the return roller and the infeed roller of the drum motor above and below
V-scraper in the belt
Adjustable (0-20°) incline at the top (L 1.50m)
Hydraulic:
Pump unit for driving the wheels (proportional), swivel position, belt up/down
Electrical:
Necessary power supply 3x400V + PE, 50/60HZ, 32A
Electric motors for driving the hydro-unit (2.2kW), belt (drum motors), in/out
Frequency inverters for belt drive
Sensors:
Encoder on the pivot point -> recording teach points
Inductive sensor: measuring the end position during in- and out-movement
Pressure sensors: supply pressure & wheel motors
Control:
Electrical cabinet with incoming 32A plug + phase selector
* functions: start-stop & reset (with light indication), emergency stop, buzzer
* LC: 13-pin connector for connecting to other machines
5" Touch-display and wired keypad (10m)
5" Display for all controls, information & error codes
Keypad: 15 functions + emergency stop:
* belt on/off, belt speed, belt up/down, belt in/out, manual/auto,
swivel position, swivel left/right, drive left wheel/right wheel - forward/backward,
teach positions and a selection key
Automatic function standard machine:
Limiting left and right by setting teach points
Waiting and retracting at the teach point
Safety by overpressure on wheel motors
17 m length, 0.80 belt width

Coupling part for double belt
Rubber rings on all rollers
Infeed belt (1250 mm). Synchronized with the belt, -15% +15% speed compared to the main belt. Option: double PU
wheels incl.
2 LED work lights on the top fixed part of the elevator
Radio remote control with emergency stop (tiger)
AUTO II (wall and product detection + height measurement) filling program

Strengths:
User-friendly and easy to maintain.
Gentle handling of the harvest due to minimal drop height and uniform feeding of the potatoes.
Semi-automatic filling thanks to sensors.

The listing was translated automatically. Translation errors are possible.