AXA DBZ

AXA DBZ

Condition: used, Year of construction: 2014, operating hours: 30,663 h, machine/vehicle number: 87391, Control system: HEIDENHAIN TNC530, travel range X/Y/Z: 2x 750x500x600 mm, swiveling table, tool holder: SK40, 22 tool positions, chip conveyor: AXA FSB 300/TLG:38,1, serial number: 171153-1, 87391, year of manufacture: 2014. Ljdpfey T Nygex Aiiohg

Condition: ready for operation (used), Year of construction: 2007, operating hours: 65,155 h, travel distance X-axis: 750 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, table width: 500 mm, table length: 1,350 mm, table load: 550 kg, overall weight: 10,000 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 22, number of axes: 4, This 4-axis AXA DBZ vertical double machining centre was manufactured in 2007. It features an impressive X-axis travel of 2 x 750 mm, Y-axis travel of 500 mm, and Z-axis travel of 600 mm. The machine is equipped with a main spindle speed range of 30–10,000 rpm and a maximum table load of approximately 550 kg. If you are looking to get high-quality machining capabilities, consider the AXA DBZ vertical machining centre we have for sale. Contact us for further details. Lhsdpfxoy Sg I Es Aiiog Double machining centerWith 2x 4th axis RTA 1-180Automatic doors (possible for robot handling system)Main spindle speed range 30–10,000 rpmMain spindle drive power ~30 kW (40% ED)Max. torque ~143 NmTool holder SK 40 DIN 69871 / AInternal coolant supply (water - air)Table clamping surface 2 x 1,350 x 500 mmMax. table load approx. 550 kgNumber of T-slots 3T-slot width 14H9 mmT-slot distance 160 mm4th axis 2 x RTA 1-180Number of tool positions 22 . tool diameter 85 mmMax. tool diameter with free adjacent pocket 135 mmMax. tool length 400 mmTool change time 4.0 secRapid traverse X/Y 25 m/minRapid traverse Z 20 m/minFeed force 9 kNTotal power requirement 55 kVAMachine weight approx. 10.0 tOperating hours: 65155 h Technical Specification Through-spindle Coolant Yes

Condition: good (used), Year of construction: 2012, AXA DBZ 2/50 double station machining center, Year of construction 2012, Siemens 840 control system, Travel X/Y/Z 2x800/600/600 mm, 16-position tool changer, Lhsdpjridf Uefx Aiijg SK 50 tool holder, Spindle speed up to 4,000 rpm, Milling spindle - water-cooled hollow shaft motor, dir. Measuring systems, chip conveyor, heat exchanger, switch cabinet, oil mist lubrication, Rittal cooling system,

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain iTC530, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel X-axis: 2 x 750 mm Travel Y-axis: 500 mm Travel Z-axis: 600 mm Rapid traverse X / Y direction: 25 m/min Rapid traverse Z direction: 20 m/min Feed force: 9 kN Spindle speed range: 30-12,000 rpm Tool changer: 22-position Tool holder: SK40 Maximum tool length: 400 mm Maximum tool diameter: 85 mm (135 mm with adjacent stations empty) Tool change time: 4.0 s Lsdsymz D Nepfx Aiiehg Clamping area: 2 x 1,350 mm x 500 mm Maximum table load per table: 550 kg MACHINE DETAILS Control model: Heidenhain iTC530 Drive power: 30/20 kW Total power requirement: 55 kVA Dimensions & Weight Dimensions (L x W x H): 6.0 x 3.5 x 3.5 m Machine weight: 10,000 kg EQUIPMENT Internal cooling Coolant system with paper band filter Documentation

Year of construction: 2012, condition: ready for operation (used), Travel X/Y/Z: 2x 800mm/600mm/600mm, speed: 4000rpm, table spindle nose distance: 180mm-780mm, max. tool diameter/length: 85mm/135mm, rapid traverse X/Y/Z: 25m/25m/20m/min, feed force: 9000N, ground clamping surface: 2x 1000mm/500mm. Dimensions X/Y/Z: approx. 6600mm/3000mm/3200mm, weight: approx. 18000kg. Documentation available. Lhjdpfxetyymcs Aiisg