Lathe - cycle controled

Böhringer DUC 560

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, turning length: 1,000 mm, turning diameter: 570 mm, quill stroke: 190 mm, bed width: 360 mm, rotational speed (max.): 2,500 rpm, TECHNICAL DETAILS Swing over bed: 570 mm Swing over cross slide: 365 mm Cross slide travel: 345 mm Center height over flat track: 280 mm Bed width: 360 mm Bed slide guide length: 520 mm Cross slide width: 225 mm Cross slide length: 680 mm Turning tool cross-section according to DIN 770 hxb: max. 20 x 20 mm Thread pitch: 01-400 mm Main spindle Spindle head according to DIN 55 027: Gr. 8 Spindle diameter in front bearing: 100 mm Spindle bore: 62 mm Main spindle inner taper: 70 mm Speed range gear stage I: 3–500 rpm Speed range gear stage II: 15–2500 rpm Constant cutting speed: 1–9999 m/min Speed control: 50–120% Load display in % on screen: 0–140% Main drive Three-phase AC motor: 0–120 kW Drive power (60%/100% duty cycle): 19/15 kW Maximum torque (60%/100% duty cycle): 1,800/1,400 Nm Total speed range: 3–2,500 rpm Number of gear stages: 2 Feed drives Feed range, flat and Longitudinal: 0.01-50 mm/rev Max. feed rate, transverse (rapid traverse): 5 m/min Max. feed rate, longitudinal (rapid traverse): 10 m/min Conventional rapid traverse, longitudinal: 5 m/min Tool holder Number of tool holders: 8 Diameter of the 8 cylindrical shank holders according to DIN 69 880: 30 mm Tailstock Quill diameter: 80 mm Quill stroke: 190 mm Inner taper of the quill: MK 5 Tip angle, normal: 60° MACHINE DETAILS Dimensions (L x W x H): 3.25 x 2.03 x 1.95 m Dsdjwmck Sopfx Ah Socb EQUIPMENT - Disk tool turret for 8 tools with VDI 30. - Not for driven tools - Machine manual, technical documentation; - 3-jaw chuck, various tool holders

Year of construction: 1993, condition: good (used), CNC lathe cycles Fabr.VDF BOEHRINGER type: DUC 560 BJ. 1993 with SIEMENS SINUMERIK 805T control. Turning length: 1000 mm Turning diameter over plan support: 365 mm Turning diameter above bed: 570 mm Spindle speeds: 3-2500U/min spindle motor: 19KW Spindle bore: 62 mm Dodjd Ewaajpfx Ah Sjcb Chuck diameter: 315 mm Forkardt Turret head with 8 POS. VDI 30 With accessories and equipment documentation.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 2022.3781-03, turning diameter over cross slide: 365 mm, turning length: 4,000 mm, spindle speed (max.): 2,500 rpm, controller model: Siemens Sinumerik 810 D, TECHNICAL DETAILS Turning length: 4000 mm Swing over bed: 570 mm Swing over cross slide: 365 mm Cross slide travel: 345 mm Center height over flat track: 280 mm Bed width: 360 mm Bed slide guide length: 520 mm Cross slide width: 225 mm Cross slide length: 680 mm Turning tool cross-section: max. 20 x 20 mm Faceplate diameter: 560 mm Chuck diameter: 250 - 315 mm according to VDF 6025 Control: SINUMERIK 810 D with screen Workpiece weight with tailstock: max. 1000 kg Workpiece weight with tailstock and 2 steady rests: max. 1600 kg Main spindle Spindle head according to DIN 55 027: Size 8 Spindle diameter in the front bearing: 100 mm Spindle bore: 62 mm Main spindle inner taper: 70 mm Main Drive Motor type: Continuously variable three-phase AC motor Drive power (60% / 100% duty cycle): 25/20 kW Maximum torque (60% / 100% duty cycle): 1,800/1,400 Nm Total speed range: 3 - 2,500 rpm (2-stage) Constant cutting speed: 1 - 9,999 m/min Feed drives Drive type: Three-phase servo drives (AC motor) Transverse and longitudinal feed range: 0.01-50 mm/rev Max. feed rate (rapid traverse): 5 m/min Conventional rapid traverse, transverse: 2.5 m/min Dcsdjv R Hamspfx Ah Sob Max. longitudinal feed rate (rapid traverse): 10 m/min Conventional rapid traverse, longitudinal: 5 m/min Transverse feed force: 7,100 N Longitudinal feed force: 12,500 N Tailstock Quill diameter: 80 mm Quill stroke: 190 mm Quill inner taper: MT 5 Tip angle, standard: 60° Thread pitch: 0.1 - 2,000 mm MACHINE DETAILS Floor space required: 6.83 x 2.16 m Machine height: 1.98 m Weight: 7,200 kg Total power consumption: 35 kVA EQUIPMENT - Sauter 8-station disc turret - Fixed steady rest - 8 cylindrical shank adapters - Coolant pump - Lubrication pump - Machine stand - Transport base - Main spindle brake - Operating instructions and circuit diagrams