300/050 Unilog 4000

BATTENFELD

Condition: used, Year of construction: 2002, Injection molding machine, Battenfeld TM 3500/1900, year of manufacture 2002. Bljdpozcm Hhefx Ahpji

Condition: used, Year of construction: 2002, Injection moulding machine Battenfeld HM 1000/1440, year 2002. Screw from Battenfeld: 135 mm. The machine is equipped with a single-cavity shut-off nozzle for the mould, as well as a shut-off in the injection unit. The Battenfeld currently has 87,545 operating hours. The machine is still in production. Bjdpfx Ahsxwlmnepoli

Condition: good (used), Year of construction: 2001, Battenfeld TM 4500/2800 injection molding machine Year of production: 2001 Control: Unilog B4 4 identical machines available Closing system: Closing force: 4500 kN Minimum mold height: 425 mm Maximum mold height: 770 mm Bledpfx Ahsvn Sa Topsi Column spacing: 800 x 800 mm Mounting plate dimensions: 1155 x 1195 mm Mould opening stroke: 760 mm Injection unit: Screw diameter: 75 mm Shot weight (PS): 1506 g Injection volume: 1657 cm³ Specific injection pressure: 1739 bar Robot interface: Euromap 12 Machine dimensions: 8.3 x 1.9 x 2.4 m Weight: 20400 kg Oil tank capacity: 800 liters

Condition: excellent (used), Year of construction: 2017, WITTMANN BATTENFELD MacroPower 900/8800 Injection Moulding Machine Type: Servo-hydraulic injection moulding machine Year of manufacture: 2017 Control system: UNILOG B8 INJECTION UNIT • Screw diameter: 105 mm • Screw stroke: 525 mm • Screw L/D ratio: 22 • Calculated shot volume: 4,545 cm³ • Injection pressure: 1,931 bar • Max. screw speed: 167 rpm • Max. plasticising rate (PS): 151 g/s • Screw torque: 8,000 Nm • Nozzle stroke / closing force: 950 mm / 129 kN • Injection flow rate: 725 cm³/s • Injection flow rate with dual pump (option): 906 cm³/s • Open-air injection flow rate with tank (option): 1,812 cm³/s • Barrel heating capacity: 53.9 kW • Number of heating zones: 7 CLAMPING UNIT • Clamping force: 9,000 kN • Max. opening stroke: 2,100 mm • Min./Max. mould height: 500–1,000 mm • Platen dimensions: 1,720 × 1,550 mm • Tie bar spacing: 1,200 × 1,000 mm • Ejector: stroke 300 mm / force 165 kN Bjdewzy N Uopfx Ahpjli • Mould opening force: 300 kN GENERAL DATA • Pump power: 90 kW • Heating power: 53.9 kW • Hydraulic oil tank capacity: 1,100 l • Machine dimensions (L × W × H): 10,100 × 3,400 × 2,700 mm • Weight: 35,200 kg

Year of construction: 2003, operating hours: 65,470 h, condition: refurbished (used), functionality: fully functional, machine/vehicle number: Titan 68R-APC/ 2 68F-60-40-1100-UT, Titan 68R-APC/2 68F-60-40-1100-UT with tungsten carbide cylinder and screw (designed for WPC-HDPE base) Bodpfxjzh Edne Ahpoli Very good feeding behavior and good processing. Screw modification for optimal use, including in the recycling sector. The system has been completely overhauled and is ready for use. Feeder optionally available. SIHI vacuum pump. For throughputs up to 400 kg/h. For highly filled compounds, approximately 180 kg/h. 4-zone heating.

Condition: excellent (used), Year of construction: 2002, Battenfeld TM 4500/4500 B4 Year of manufacture: 2002 Clamping force: 450 tons Screw diameter: 85 mm Injection weight: 1870 g Bledpfx Aoxvihashpei Tie bar distance: 80x80 cm

Condition: excellent (used), Year of construction: 2003, Battenfeld 1300/350 Year of manufacture: 2003 Clamping force: 130 t Screw diameter: 40 mm Bljdpfod Sqrrjx Ahpei Operating hours: 77,890 h Tie bar distance: 42 x 42 cm

Condition: excellent (used), Year of construction: 2003, Battenfeld 1300/350 Year of manufacture: 2003 Blsdpfx Asxvihmjhpoi Clamping force: 130 t Screw diameter: 40 mm Operating hours: 77,890 h Tie bar distance: 42 x 42 cm

Condition: excellent (used), Year of construction: 1997, Battenfeld BA 800/315 CDC Bledpfor Nf R Iox Ahpei Closing 80 tons Year 1997 Scrow 40 mm distance between tie bars 37x42

Year of construction: 1999, condition: used, The system is not just a simple recycling extruder; it is a complete plastic recycling line consisting of: * Heysohn PAR 108 agglomerator/compactor (1993) * Heysohn extruder with degassing * Material feed and metering * Discharge/conveying system * Documentation available * Multi-zone heating (at least 9 heating zones visible) * Vacuum degassing * 60 kW main drive * RAVIS 2 modular control system * Machine is evidently still fully assembled The control panel shows the following handwritten notes: * Extruder type: presumably PAR 108 * Diameter: 130 mm Bodpfjzhl R Iox Ahpjli * Extruder output: approx. 345 kg/h * Motor power: 135 HP The system appears to have been used for processing film and plastic regrind into granules. Battenfeld BFX2-130-25V plastic extruder – year of manufacture 1999 For sale is a plastic extruder from Battenfeld Extrusionstechnik GmbH, type BFX2-130-25V, year of manufacture 1999. The system consists of an extruder, material feed with hopper, drive unit, and conveying system. The machine comes from an industrial plant and is in assembled condition. Manufacturer: Battenfeld Extrusionstechnik GmbH Type: BFX2-130-25V Year of manufacture: 1999 Operating voltage: 400 V / 50 Hz Weight: approx. 9,500 kg