Beinlich Primus 2800 I 100x500

Beinlich Primus 2800 I 100x500

Standard equipment:
1-axle chassis: straight axle flange-mounted with brake drum, track width 2.00 m,
rear supports in conjunction with a tripod lifting device via a hydraulic
hand pump, front support foot, boom support with base plate, tire size 15.0/55-17,
hitch for drawbar including clevis pin, mechanical swivel ring,
lateral gear-wheel drive of the drum, 4-speed gearbox including PTO
quick-shift and band brake, turbine flange-mounted, bypass control for
electronic regulation of the intake speed, electronic control 2 KR with large
solar panel and large 12V battery in a waterproof, lockable cabinet (charger),
tension roller on the winding unit, stop sensor on the gearbox, water connection
ø VT 108 mm, one-sided overpressure and underpressure shut-off, end and safety
shut-off mechanically, gantry tripod 80 for track bar, with horizontal
adjustment, passage height 1.60 m, sprinkler position in the center, track width:
1.50 m - 2.25 m, straight drawbar hook galvanized, sprinkler type Sime Reflex 5 pcs
ø 22/24/26/28/30 mm (nozzles possible ø 16-34 mm), flat hose
ø 102 mm, length 8 m, with Perrot M couplings ø 108 mm,
pressure gauge on the machine and sprinkler, machine protection cover.
Bdsdj Afh Emspfx Ai Tji
The primus series is equipped with a brake axle as standard.

Brake system 306 E
1 for Primus Series I, with membrane brake cylinders, parking brake with hand crank
Lighting kit permanently mounted
1 extendable to machine width, warning signs front and rear, reflectors on the sides, socket at the front of the machine, cable to the tractor
1 TÜV approval 25 km/h
Hydraulic set for swivel ring and support foot
1 2-lever control valve (only in conjunction with hydraulic slide supports)
Separate hydraulic lifting device
1 3-lever control valve (required for nozzle car, boom arm and for 5-wheel tripod)
Water connection ø 108 mm Perrot
1 on both sides, with overpressure and underpressure shut-off
Perrot V part ø 89 mm
1 with pressed hose nozzle ø 89 Perrot
1 pressure sensor including pressure switch function
Annual fee for SMS operation
1 multi-SIM card already installed
1 reduced price without tripod and sprinkler
Water meter ø 3", flange-mounted, installed
1 uncalibrated, digital for 4KR electronics

Beinlich nozzle car R 46/46:
Working width 50 m
8 self-supporting pipe elements, galvanized, swivelable, nozzle height 1.50 m
Hanging device for 3rd and 4th element (made of stainless steel 304) under 2nd element,
3-wheel chassis heavy-duty design, galvanized
Adjustable track width 1.50 m – 4.20 m with swivel ring
PE pipe connection in the center
Nozzle set 14 x 360°, 2 x 180°
Ball valve pressure regulation 1.4 bar with spinner
Nozzle selection according to flow rate for 20-50 m3/h

1 4-wheel tripod heavy-duty design
Pipe connection on the side for track bar, left, adjustable track width 2.20 m
2 Rotator end nozzle R55iVT - facing downwards
1 Wheel holder height adjustable to compensate for deep tracks
1 Transport supports for nozzle car
1 Swivel device to reduce transport width
2nd element swivels onto 1st element, 3rd and 4th element hang under 1st element

The listing was translated automatically. Translation errors are possible.