CNC turning lathe

BIGLIA B 470/YSM

Condition: ready for operation (used), Year of construction: 2003, CNC: GE Fanuc Series 18i-TB No. 02 motorized turrets Ksdpfx Akezmgh Eewjdt Y-axis on rear turret Sub-spindle TOP loader

Condition: used, Swing Diameter Over Bed: 400 mm Swing Diameter Over Longitudinal Slide: 350 mm Distance Between Centers: 610 mm Travel Limit: 240 mm Suggested Workpiece Diameter: 200 mm Max Longitudinal Travel: 560 mm Machining Length: 550 mm Max Cross Travel: 40 mm + 120 mm Height of Spindle Axis from Floor: 1135 mm Programmable Spindle Speed Range: 40 to 4000 rpm Spindle Bore Diameter: 52 mm Spindle Interior Cone: MK 6 Slide/Bed Slope: 45/45° Turret Positions: 12 Tools Main Motor: 15 kW Control: Fanuc 6T Kedpexg Nd Aefx Akwsdt Equipped with: See photos

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, CNC: GE Fanuc Series 18i-TB MAIN SPINDLE CAPACITY Max. workable diameter from bar stock: 83 mm Max. workable diameter from chuck: 200 mm Max. workable length: 300 mm Max. turning diameter: 200 mm Distance between the two spindle centers: 690 mm TAILSTOCK CAPACITY Max. workable diameter from bar stock: 45 mm Max. workable diameter from chuck: 160 mm Max. workable length: 200 mm Max. turning diameter: 160 mm Distance between the two spindle centers: 690 mm MAIN SPINDLE Variable speed range: 100 - 4000 rpm Spindle nose: ASA 8'' Spindle bore: 80 mm Bearing inner diameter: 110 mm Self-centering diameter: 210 mm Collet chuck: DIN 6343 Motor power: 22-26 kW (50%) Kdedpfx Aexhciujkwet TAILSTOCK Variable speed range: 100 - 4000 rpm Spindle nose: ASA 5'' Spindle bore: 56 Bearing inner diameter: 90 mm Self-centering diameter: 165 mm Collet chuck: DIN 6343 Motor power: 5.7-7.5 kW (50%) TURRET Number of positions: 12 Type: bidirectional Outer tool shank: 20 x 20 Boring tool shank: Ø 32 Indexing time (1 position): 0.2 sec POWERFUL TOOLS Number of positions: 12 Variable speed range: 100-3000 rpm Motor power: 1.1 - 3.7 kW (25%) MAIN SPINDLE AXES X-axis stroke: 160 mm Z-axis stroke: 390 mm X-axis rapid traverse: 12 m/min Y-axis rapid traverse: 6 m/min TAILSTOCK AXES X-axis stroke: 158 mm Z-axis stroke: 240 mm Y-axis stroke: /// X-axis rapid traverse: 12 m/min Z-axis rapid traverse: 20 m/min Y-axis rapid traverse: /// C-AXIS - CONTROLLED Type: CS (direct) Minimum programmable value: 0.001° Rapid traverse speed: 80 rpm COOLANT Tank capacity: 180 lt Pump flow rate: 150 lt/min Pump motor power: 0.75 kW DIMENSIONS - WEIGHT Overall dimensions with chip conveyor: 4107x2128x2204h mm Center height of the main spindle: 1050 mm Weight with chip conveyor: 7200 kg

Condition: used, Year of construction: 2004, BIGLIA B 470 YSM LATHE LATHE WITH Y AXIS SUB-SPINDLE 2 MOTORIZED TURRETS FANUC 18i-TB CNC CONTROL CAPACITY: Max working diameter from bar (main spindle/sub-spindle): 68/45 mm Max working diameter (chucking, main spindle/sub-spindle): 200/160 mm Max working length (main spindle/sub-spindle): 300/200 mm Max swing diameter (main spindle/sub-spindle): 200/160 mm Bar passage (main spindle): 65 mm SPINDLE: Main spindle/sub-spindle speed range: 100–4000 / 100–4000 rpm Kedpsy Ndx Asfx Akwsdt Spindle nose (main spindle/sub-spindle): ASA 6'' / ASA 5'' Spindle bore (main spindle/sub-spindle): 80/56 mm Spindle motor power (50% duty cycle) (main spindle/sub-spindle): 22-26 / 5.7-7.5 kW UPPER/LOWER TURRET: Number of driven tool positions: 12 Driven tool speed range: 100–3000 rpm Drive motor power: 1.1–3.7 kW (25% duty cycle) AXES: X-axis travel (main spindle/sub-spindle): 160/158 mm Z-axis travel (main spindle/sub-spindle): 390/240 mm Y-axis travel (main spindle): 100 mm (40-60) B-axis travel (sub-spindle): 420 mm C AXIS (CONTROLLED): Minimum programmable value: 0.001° DIMENSIONS: Overall dimensions with chip conveyor: 4107 x 2128 x 2204h mm EQUIPPED WITH: – Chip conveyor

Condition: good (used), Flat-jaw thread rolling machine, thread rolling machine, segment thread rolling machine, cold forming machine, knurling machine, thread rolling machine Kdsdpfxei Eg Nks Akwet -Manufacturer: EWM, flat jaw thread rolling machine knurling machine -Type: unfortunately without type designation -Drive: 4.6/5.8 kW 1435/2890 rpm -Belt drive: 3-way adjustable -Knurling plate: RAA 1.0 -Central lubrication: -Dimensions: 1680/920/H1440 mm -Weight: 1308 kg

Condition: used, CNC machining center BIESSE Rover C 6.50 CONF.2, year 2007 Working area: approx. 140 × 460 cm Machine dimensions: 300 × 650 cm Weight: approx. 6,100 kg Two working heads Tool magazine: 22 positions Vertical drilling spindles: 28 pcs Horizontal drilling spindles: 12 pcs Kdjdpfx Akjw Rpd Sowot Price negotiable, available immediately. Price is without VAT.

Year of construction: 1985, condition: reconditioned (used), Technical Details : Wire Dimeter range- 4-12mm Gscxckebw Run out table - 4m Speed -80' m/min. Reconstruction- 2022 Kodpfx Aoh In Thjkwsdt

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SF100s.01.26, screw diameter: 200 mm, total length: 3,200 mm, total height: 2,200 mm, overall weight: 400 kg, heating capacity: 10 kW (13.60 HP), pressure: 2 bar, type of input current: three-phase, input frequency: 50 Hz, input voltage: 380 V, warranty duration: 24 months, Machine for cheese streching, dozing, mozarella and other. Kedjt I Dxwjpfx Akwedt

Condition: used, Year of construction: 2007, x-travel 900 mm y-travel 300 mm z-travel 1000 mm control Siemens Sinumerik 840D max. workpiece diameter 1600 mm Kdedpfxow Rrb Ho Akwjt max. module 20 mm tip circle diameter 350 mm Milling arbour diameter 375 mm Total closing value 80 kVa weight of the machine ca. 33,5 t dimensions of the machine ca. 10,530 x 6,375 x 4,680 m Feed rate: - X-axis 1 to 3000 mm/min - Y-axis 1 to 3000 mm/min - Z-axis 1 to 4000 mm/min Spindle speeds in rpm: - Tool 26 to 265 - Workpiece table 0 to 8 Equipment/accessories: - M 2 motor milling head - Milling mandrels - Oil cooler - Technical documentation

Condition: good (used), Year of construction: 2011, machine/vehicle number: 2212.287, Automatic panelsaw Schelling Typ:FH 6 430 Maskin nr:221.287 År:2011 Panel beam saw Schelling with automatic, rear-feed,lifting table. For sawing board material, chipboard, MDF, Plywood, Board, Laminate etc. Techn info: Software MCS Evolution 2.0, SPS, Soft-SPS-Siemens WinAC Operating system WINDOWS XP PC with keyboard and mouse TFT monitor 17" Cutting length 4300mm, automatic detection of the start of the plate Cutting width 4300mm Machine accuracy of the cut length 3m +-0.1mm Positioning accuracy measured at input +-0.1mm Max diameter saw blade 460mm, spindle 30mm Pre-scoring blade 200mm, spindle 20mm motor operation is set from the control console Max panel thickness 120mm Panel stack aligner Main saw blade motor 27kw Saw blade over table 135mm Safety curtain Air cushion table with 3pcs air ball nozzles, radial ventilator fan Table sizes 2650x850mm 620x850mm 2650x2550mm Pressure beam with automatic adjustment of pressure to cut length and package height Package straightener before and after the pressure beam Max package height 120mm (incl. sum of curvature and board thickness tolerance) Pusher with 12 grippers Max clamp opening (gripper) 133mm Min-max force package straightener 400/2000N Speed saw carriage forward 6-150m/min Speed saw carriage back 150m/min Forward feed speed (pusher) up to 25m/min (according to EC Europa EN1870-13) other countries 80m/min Speed feeding back up to 80m/min Push-off device 3 pcs Lift table length x width 4350x2550mm Hydraulic unit Standard version 1600mm lifting height 1.25/2.5m/min raising speed, 1.25/5m/min lowering speed Maximum load 1200 kg/m2 total 9 tons Roller track driven rollers, frequency controlled for stack on lifting table 4100x2600mm Max stack weight 6500 kg Max stack length 1060mm Slots for forklift 4 pcs, distance in the middle 1200mm, slot width 300mm Light curtain for personal protection Roller conveyor driven for package frequency controlled input to lifting table left 5600x2600mm max load 6500kg Roller conveyor driven for packages frequency controlled input to lifting table right 5600x2600mm max load 6500kg Slots for forklift 2 pcs, center distance 900mm, slot width 400mm 2 positioning stops with roller for stack alignment Light curtain (double beam) for personal protection Roller table after saw depth 4300mm, free-running ployamide rollers Angle stop at the rolling table Infeed guide two-lane (beam length 7200mm) 2-sided hardened precision guides rack and pinion drive, two-sided Input carriage (pusher) gear rack servo drive, non-contact measuring system Gripper, (scissor clamps) in pusher 12 pcs Automatic adaptation of the clamping force to the package height (progressive clamping force) can be set to 0 Pusher for panels thickness greater than 6mm,material thinner than 6mm is fed manually Central cleaning system feed trough (pusher) Compressed air 6-8 bar, approx. 1600l/min Power 38 kw, 70 A. 3x400 volts, 50 Hz, operating voltage 24 VDC Dust extraction 4000m/h, air speed 30m/s Diameter connection 80mm (angle connection), 120mm /pressure beam), 150mm (sawdust channel) Total setup area without driven roller conveyors including protective grid approx: 11650x7300mm Driven roller tracks left-right 5500+5500mm Stock no: 2002125BXACEO Kdodpfxotk It Se Akwjt Subject to incorrect technical data presented