Waterbased Laminating Machine

Billhöfer EK 104-50

Condition: good (used), Laminating Machine Komfi Delta 76 Stacker Manufactured in 2016/2017. The machine is 100% operational and ready for operation. This is an advanced, high-performance machine, ideal for commercial laminating. The machine is in very good condition and ready for production. Technical specifications: Fpedpfx Aezlgbpjfujn Max sheet size: 760mm x 1120mm Min sheet size: 300mm x 220mm Min grammage: 115 gsm Max grammage: 600 gsm Operating temperature: 80-145°C Max operating speed: 35m/min Built-in Becker compressor Weight: 2800kg 380V power supply Additional air supply: 6 bar Power consumption: 18kW Pneumatic clamping, separation, and automatic feeding from a high stack, automatic stacker. Touch panel for easy operation. Sheet straightening module. Tool kit and foil included.

Condition: as good as new (ex-display), Year of construction: 2019, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 19101105, roller width: 1,100 mm, Equipment: full service history, type plate available, The SDFM-1100 roll-to-roll laminator is a multifunctional laminating machine. It is designed for cold and hot laminating. The paper is laminated on one side with the foil. Then the web is re-rolled onto the roll. For cold laminating, the foil is coated with a water-based glue and dried using a heating roller with a warm air drying system. The winding system sends the paper to the laminating section, where the paper is covered with the foil by heating and roller pressure. The rollers use a heated water circulation system with constant temperature control. The paper roll is held by pins, which are controlled by a pneumatic brake. The paper is unrolled to the leveler, which is equipped with automatic leveling of the paper web before laminating, which ensures even coverage of the web with foil. In the laminator, the non-adhesive film is coated with a water-based adhesive and then dried with a heating cylinder or the film already coated with adhesive is unrolled into the laminating cylinder. The laminating cylinder is heated using induction heaters. Under the laminating cylinder, the paper is joined to the film using temperature and pressure generated by the lower rubber roller, which presses the film with the paper against the laminating cylinder. The laminated web is wound onto a core on a shaft in the receiving section, after which it can be transported to subsequent production processes. Specification SDFM-1100 Maximum roll width 1100 mm Maximum roll diameter 1100 mm Paper weight 80 - 500 g/m2 Film thickness 10-50 microns Fodpfsvy Aipex Afuepn Working speed 10 - 65 m/min Electrical voltage 380V 50Hz Total power 78 kW Maximum power consumption 30 kW Total weight 8000 kg Machine dimensions 10130×2130×2960 mm

Year of construction: 1988, condition: excellent (used), Heidelberg Cylinder SBD PZ 90 Control System – Technical specifications: 4 impression cylinders, 4 heating zones, foil capacity: 20-800 m, working capacity: 3600 sheets/h, max. sheet size: 64 x 90 cm, min. sheet size: 29 x 45 cm, foil working size: 54 x 82 cm. Fpsdpfezd Tw Uex Afujn

Year of construction: 2001, condition: excellent (used), Gietz FSA 790 EFF, year of manufacture: 2001 Technical specifications: Fpodezd T Hpepfx Afuon - MABEG feeder - 2 x transverse foil - 3 x longitudinal foil - Hot foil embossing (2 x honeycomb plate) - Die-cutting (additional die-cutting tool) - Hologram option (electronics refurbished in 2020) - 6 heating zones Technical details: - Maximum sheet size: 790 x 560 mm - Minimum sheet size: 297 x 210 mm - Maximum stamping area: 720 x 520 mm - Speed up to 5,500 sheets/hour

Condition: excellent (used), Year of construction: 2008, KOMFI SAGITTA 76 Laminating Machine Fpodpez Ebfgsfx Afuen Manufacturer KOMFI spol. s r.o., Dvořákova 1001, 563 01 Lanškroun Production Year 2008 • Max. Size: 760x1120 mm (29,9"x44,1") • KOMFI SAGITTA 76 automatic laminator • automatic sheet feeder with loading head • conveyor with precise loading monitoring • thermal roller with multi-zone heating • precise temperature control • pressure application • separation of laminated sheets (separator) • delivery unit with counter • max. speed: 50 m/min • paper lamination: 115–600 g/m² • machine power input: 16.5 kVA • Availability immediately Condition of the Machine very good condition, well maintained, worn out according to its agecan be seen running

Condition: excellent (used), Year of construction: 2017, operating hours: 52 h, machine/vehicle number: 1704476, Single-sided, sheet-fed, thin-film thermal laminator for long print runs. Maximum sheet size: 106 x 106 cm (41 3/4” x 41 3/4”), Minimum sheet size: 28.5 cm x 32 cm (11.5” x 12.5”), Maximum speed: 120 m/min (394 ft/min), paper weight from 115 gsm (80 lb text) to 650 gsm (24 pt). Quick setup, easy operation, robust construction. • Heidelberg Speedmaster feed head, rising pile, back separation, stream feeder, vacuum feed table, servo-driven mechanical front-lay registration, maximum pile height 1.2 m (47”). Fpodszudqgepfx Afujn Water-heated chrome laminating roller.

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 16074, Automatic Sheet Feeder A-4: Mabeg Suction Head, Double Sheet Control Laminating Unit EK-HL-4: Waterbased & Thermal Automatic Sheet Seperator UTM-4 Automatic Sheet Seperator TM -4 Fpodpfx Afszimygouen Seperating Unit: Quadruple Round Knife, Perforating Device, Hot Knife Powder Spray Removal Device GK-4 Automatic Stacker S-3 Airjet-Dryer

Condition: ready for operation (used), Year of construction: 1998, Working width: 650-1305mm, exception PET/ALU/PE and ALU/PE: max. 1100mm, production speed: 120-220m/min, max. operating speed: 300m/min, max. primary unwinding roll diameter: 1000mm, core inner diameter cardboard core: 76/152mm, steel core: 150mm, adhesive application 2K for film/film: approx. 1.5-2.5g/m², 1K for paper/film: approx. 2.5-4g/m², max. secondary unwinding roll diameter: 1000mm, core inner diameter cardboard core: 76/152mm, steel core: 150mm, max. rewinding roll diameter: 1200mm, core inner diameter cardboard core: 152mm, steel core: 150mm, processable materials, min. polyester film: 10µm, min. aluminum foil: 6.6µm, min. PE film primary unwinder: 40µm, min. PE film secondary unwinder: 30µm, max. paper: 150g/m², length: 8625mm, complete documentation vorhanden. An on-site inspection is possible. Fodpfxjy Uydfe Afuepn

Condition: excellent (used), Year of construction: 2017, Ref: 11038 . 2017 Rollem 36” Jetslit + 30” Rollaway and Cassette Delivery High volume print finishing system to maximizes finishing productivity for large volume producers For greeting cards, photo books, direct mail, postcards, invoices, business cards, game cards and much more. Features: This flexible system takes full press sheets and converts them to finished products in one step, eliminating the need for guillotine cutting, excess manpower and paper movement. 100% accuracy of finished products is a key feature of the Jetslit. Performs multiple print finishing steps with one system Bi-directional slitting, cutting, creasing and perforating in one machine Ideal for high volume production Multiple-up layouts maximize press sheet Decreases excess labour costs Eliminates touch points and paper movement Fully integrates with press via DFA communication system Accepts sheets in-line from press or operates in a stand-alone near-line configuration Process: The system takes full printed sheets with multiple images and converts each sheet in two directions, as shown below: 1. Full sheets are fed into the JetSlit registration guide for perfect alignment. 2. The sheets are completely slit on the extreme edges and timed slit in-between with Rollem's patented strike-slit feature. 3. The sheets are turned 90 degrees and re-registered. Fpodpfjxyxr Nex Afuon 4. Final slits are made, removing the notched portions and leaving the final pieces. Specification: Speed: Up to 6,000 cut product sheets per hour Format: Up to 36’’ (915mm)

Condition: good (used), Year of construction: 2001, functionality: fully functional, Automatic Sheet Feeder A-20-P (Pile Table, Mabeg Suction Head, Double Sheet Control, Suction Belt Table) Automatic Laminating Unit EK 102 (Waterbased & Thermal) Seperating Unit TM-102-K: Automatic Sheet Seperator with Quadruple Round Knife Seperating Unit: Quadruple Round Knife, Perforating Device Fodezvn Hzepfx Afujpn Jogging Table (Delivery)