Waterbased Laminating Machine

Billhöfer EK-HL-4

Condition: as good as new (ex-display), Year of construction: 2019, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 19101105, roller width: 1,100 mm, Equipment: full service history, type plate available, The SDFM-1100 roll-to-roll laminator is a multifunctional laminating machine. It is designed for cold and hot laminating. The paper is laminated on one side with the foil. Then the web is re-rolled onto the roll. For cold laminating, the foil is coated with a water-based glue and dried using a heating roller with a warm air drying system. The winding system sends the paper to the laminating section, where the paper is covered with the foil by heating and roller pressure. The rollers use a heated water circulation system with constant temperature control. The paper roll is held by pins, which are controlled by a pneumatic brake. The paper is unrolled to the leveler, which is equipped with automatic leveling of the paper web before laminating, which ensures even coverage of the web with foil. In the laminator, the non-adhesive film is coated with a water-based adhesive and then dried with a heating cylinder or the film already coated with adhesive is unrolled into the laminating cylinder. The laminating cylinder is heated using induction heaters. Under the laminating cylinder, the paper is joined to the film using temperature and pressure generated by the lower rubber roller, which presses the film with the paper against the laminating cylinder. The laminated web is wound onto a core on a shaft in the receiving section, after which it can be transported to subsequent production processes. Specification SDFM-1100 Maximum roll width 1100 mm Maximum roll diameter 1100 mm Iiodpfx Ajvy Aipomgsh Paper weight 80 - 500 g/m2 Film thickness 10-50 microns Working speed 10 - 65 m/min Electrical voltage 380V 50Hz Total power 78 kW Maximum power consumption 30 kW Total weight 8000 kg Machine dimensions 10130×2130×2960 mm

Year of construction: 2001, condition: excellent (used), Gietz FSA 790 EFF, year of manufacture: 2001 Technical specifications: - MABEG feeder Iiodpfezd T Hpex Amgoh - 2 x transverse foil - 3 x longitudinal foil - Hot foil embossing (2 x honeycomb plate) - Die-cutting (additional die-cutting tool) - Hologram option (electronics refurbished in 2020) - 6 heating zones Technical details: - Maximum sheet size: 790 x 560 mm - Minimum sheet size: 297 x 210 mm - Maximum stamping area: 720 x 520 mm - Speed up to 5,500 sheets/hour

Condition: ready for operation (used), Year of construction: 1998, Working width: 650-1305mm, exception PET/ALU/PE and ALU/PE: max. 1100mm, production speed: 120-220m/min, max. operating speed: 300m/min, max. primary unwinding roll diameter: 1000mm, core inner diameter cardboard core: 76/152mm, steel core: 150mm, adhesive application 2K for film/film: approx. 1.5-2.5g/m², 1K for paper/film: approx. 2.5-4g/m², max. secondary unwinding roll diameter: 1000mm, core inner diameter cardboard core: 76/152mm, steel core: 150mm, max. rewinding roll diameter: 1200mm, core inner diameter cardboard core: 152mm, steel core: 150mm, processable materials, min. polyester film: 10µm, min. aluminum foil: 6.6µm, min. PE film primary unwinder: 40µm, min. PE film secondary unwinder: 30µm, max. paper: 150g/m², length: 8625mm, complete documentation vorhanden. An on-site inspection is possible. Iisdey Uydfepfx Amgsh

Condition: excellent (used), Year of construction: 2017, Ref: 11038 . 2017 Rollem 36” Jetslit + 30” Rollaway and Cassette Delivery Iodpfxjxyxr No Amgeih High volume print finishing system to maximizes finishing productivity for large volume producers For greeting cards, photo books, direct mail, postcards, invoices, business cards, game cards and much more. Features: This flexible system takes full press sheets and converts them to finished products in one step, eliminating the need for guillotine cutting, excess manpower and paper movement. 100% accuracy of finished products is a key feature of the Jetslit. Performs multiple print finishing steps with one system Bi-directional slitting, cutting, creasing and perforating in one machine Ideal for high volume production Multiple-up layouts maximize press sheet Decreases excess labour costs Eliminates touch points and paper movement Fully integrates with press via DFA communication system Accepts sheets in-line from press or operates in a stand-alone near-line configuration Process: The system takes full printed sheets with multiple images and converts each sheet in two directions, as shown below: 1. Full sheets are fed into the JetSlit registration guide for perfect alignment. 2. The sheets are completely slit on the extreme edges and timed slit in-between with Rollem's patented strike-slit feature. 3. The sheets are turned 90 degrees and re-registered. 4. Final slits are made, removing the notched portions and leaving the final pieces. Specification: Speed: Up to 6,000 cut product sheets per hour Format: Up to 36’’ (915mm)

Condition: good (used), Year of construction: 2001, functionality: fully functional, Automatic Sheet Feeder A-20-P (Pile Table, Mabeg Suction Head, Double Sheet Control, Suction Belt Table) Iedpfx Amszvn Hzogsih Automatic Laminating Unit EK 102 (Waterbased & Thermal) Seperating Unit TM-102-K: Automatic Sheet Seperator with Quadruple Round Knife Seperating Unit: Quadruple Round Knife, Perforating Device Jogging Table (Delivery)

Condition: excellent (used), functionality: fully functional, Varnishing machine consisting of an automatic applicator and a drying tunnel. UV varnish application using rollers. Laying using an automatic stacker. Varnishing format B1+ Iiedpfx Ajwhdbnjmgeh

Condition: used, machine/vehicle number: 6694, We are offering our laminating line for sale. The following components have already been serviced/overhauled: · Overhaul or cleaning of the sheet feeder drive unit in 2025 · New main drive 2024 with frequency converter (manufacturer SEW) · Overhaul of temperature control units (2 pcs.) in 2022 · Dryer drum and laminating roller Iiedpfoyt Iprsx Amgoh · Heaters, level switches, and power contactors have been replaced. · Slip clutch separator overhauled in 2023 · Application roller modified with motor and frequency converter (manufacturer SEW) in 2017 The machine is still in operation and is being sold due to a reduction in our machine fleet.

Condition: reconditioned (used), A completely refurbished infeed for Resaw in excellent condition Iedpjhpyakefx Amgjih

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Heidelberg XL 106 - 4 + LX - 2018 Year of Manufacture : 2018 Serial Number : FS002358 Impression Count : 93 mio imp. 4 colors + Coater Offset Press of size 75 x 106 cm Equipment : • High Pile Extended Delivery (X2) • Coating Unit with Anilox roller and chambered ductor Blade • Infra-Red Dryer DRYSTAR • PRINECT PRESS CENTER XL • WALLSCREEN XL • Prinect INPRESS CONTROL (Inline Color and Register Measurement System) • Heidelberg Autoplate PRO (fully automatic plate change) • Feeder & Delivery Preset PLUS (automatic Size Setting) • ALCOLOR dampening with VARIO • Ink Temperature Control Iiedpozw H Dnefx Amgeh • Technotrans Central Refrigeration CombiStar with Alcosmart – air cooled • ALL Automatic washers (blanket, rollers and impression cylinders) • WEKO AP 500 Powder Spray • Light-weight paper kit • FilterStar Compact • CleanStar Compact (Powder Exhauster) • Steel Plate in feeder and delivery • Chromed cylinders • AIRSTAR PRO (Air Supply Cabinet – air cooled) • Pneumatic compressor with compressed air dryer • Antistatic device in feeder and delivery • SPEED : 18.000 Sheets Per Hour Fantastic machine – FULL OPTIONS ! In very good condition, very well maintained. Can be seen in production – available shortly

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 168, working width: 400 mm, compressed air connection: 8 bar, type of input current: AC, total width: 6,454 mm, total length: 7,685 mm, total height: 256 mm, overall weight: 5,000 kg, product height (max.): 120 mm, Equipment: CE marking, PERONDI LSV ESV95 – Complete Production Line in Very Good Condition PERONDI LSV ESV95 in very good condition, offered as a complete production line together with associated auxiliary equipment. The machine has been well maintained and carefully operated throughout its service life. The PERONDI ESV95 is in very good working condition and is ready for continued professional production. The machine has been regularly maintained and operated with care. Complete Production Line Includes: PERONDI ESV95 Wrapper Hot-melt glue system Feeder Vacuum belt Minimum Box size: 60 x 60 x 20 mm Maximum Box size: 600 x 400 x 120 mm Machine highlights: Manufacturer: PERONDI Model: LSV 5060 Very good overall condition Well maintained Carefully operated Ready for continued production Inspection and demonstration possible by appointment The included equipment forms a complete and integrated production line, providing the buyer with a ready-to-use solution for continued professional production. This is an attractive opportunity to acquire a well-maintained PERONDI LSV ESV95 together with all associated equipment, rather than purchasing the individual components separately. The complete line is currently available for inspection, and a demonstration can be arranged by appointment. Iijdpfx Ajz Hl Smemgoh Further technical specifications, photographs and additional information are available upon request.