Press control

Brankamp PROCESSA 3040

Condition: excellent (used), CTS Type: CW-40/30 CTS climatic chamber climatic test cell Water-cooled Floor space approx. (W x D x H): 2800 x 6830 x 2620 Test space approx. (W x D x H): 2500 x 5825 x 2300 Test room volume: 30 m³ Temperature tests: Temperature range: -40°C to +130°C Temperature deviation ± 1 K in time Average rate of temperature change without heat radiation measured in the supply air Heating: 1 K/min Cooling: 1 K/min from +95°C to -30°C Climate tests: Temperature range: +10°C to +95°C Humidity range . 10% to +95% r.h. in the dew point range: +5°C to 89°C Temperature deviation ± 0.5 K in time Humidity deviation ±1- ±3% RH over time Nominal voltage: 400V +6/-10 % 3/N, PE, 50 Hz Rated output: 80.9 kW Rated current: 126.6 A Refrigerant: R-404A Test cell weight: approx. 4079 kg Weight of machine set: approx. 409 kg O38U2Hd0Vp Weight of switch cabinet approx. 255 kg Weight condenser approx. 612 kg Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: ready for operation (used), Condition Used This listing is for a Jenway 3040 Ion Analyser Pw0Tcm

Year of construction: 1994, Condition: good (used), Good working condition and reliable granulator Ideal for injection moulding parts granulation B0Qo8G2N0T Low consumption motor: 12kw

Condition: excellent (used), Year of construction: 2011, Laser on: 49,856h Uyoa3Tuwhj Beam on: 27,887h

Condition: used, Year of construction: 2007, Machine/vehicle number: A0240A0521, Working hours laser on: 50921 h Working hours beam on: 21717 h Laser power: 3200 Watt Working range laser: 4000 x 2000 x 115 mm Max. steel: 20 mm Max. stainless steel: 12 mm Max. aluminium: 8 mm Length: 11600 mm Width: 5300 mm Height: 2200 mm Machine weight: 16000 kg Electrical connected load: 73 kVA Standard configuration - Closed machine frame with integrated laser unit - Maintenance-free three-phase AC servo motors- Automatic pallet changer- Conveyor belt for small parts / slug- Work area lighting- Positioning laser diode- Oil spray device- AutoLas Plus- Hi-Las- PMS TRUMPF Laser- CO2 laser TLF 3200- Cooling unit- Radio-frequency - Radio-frequency excitation - Programmable cutting gas pressure - Laser power control - Logbook function Cutting head - Universal quickchange device for cutting head E2Pqps3 Control Unit - Siemens Sinumerik 840 D - 3,5" floppy drive - RJ45 network connection - Automatic shut down mechanism - Dignostic function - Maintenance logbook - Technology data Safety - Light barriers - Compact dust extractor - Multi chamber exhaust system - Beam delivery system Programming - Workshop programming ToPs 100 lite Extended machine accessories none Automation none

Condition: new, Year of construction: 2023, sheet width 3060 mm plate thickness 04,0 mm Fzjfjzc distance between columns mm table width 455 mm work height max. 880 mm

Overall weight: 3,500 kg, Empty load weight: 1,580 kg, Maximum load weight: 1,920 kg, Axe configuration: 3 axles, Loading space volume: 28.8 m³, Loading space length: 6,000 mm, Loading space width: 2,350 mm, Loading space height: 1,990 mm, Color: black, Condition: new, Construction height: 2,640 mm, Working width: 2,550 mm, Light package LED / additional ramps 150cm / original aluminium rims anthracite, comfort package, hydraulics, automatic reverse, drive-on ramp, hot-dip galvanizing, * IMMEDIATELY AVAILABLE * incl. Light package LED / Additional ramps 150cm / Original aluminum rims anthracite Technical data: - Make: Brian James - Model: RT 6 - Vehicle condition: New vehicle - Initial registration: without initial registration - TÜV/HU: 2 years from initial registration - Interior dimensions (LxWxH): 600 x 235 x 199 cm - Exterior dimensions (LxWxH): 770 x 255 x 264 cm - Loading height of floor: 58 cm - Perm. Total weight: 3,500 kg - Unladen weight: 1,580 kg - Payload: 1,920 kg - Chassis: High loader (wheels under the body) - Tires: 195/55R10C - Chassis: ALKO rubber spring axle - Support wheel: Yes - 100 km/h approval: Optional, can be retrofitted DESCRIPTION - Aluminium rims, anthracite - Black body made of high-quality, fiberglass-reinforced plastic. Lightweight, yet extremely stable - Daylight roof extending over the entire length of the trailer - Maneuvering handles at the front and rear - Front hatch doors on both sides make it easier to lash the front wheels - Rear hatch doors on both sides make it easier to lash the rear wheels - Large double-leaf side doors on the left and right in the direction of travel, lockable - Full height and width drive-on tailgate with lockable, internal espagnolette lock - 2x folding additional ramps 1.5 m for very low vehicles - Castors in the rear of the vehicle - Interior height 199 cm - Drive-in height at the rear 188 cm - Side door dimensions: 116cm x 143 cm (WxH) - Lower edge of side door height inside: 23cm - Perforated steel lashing floor offers high slip resistance and is extremely wear-resistant, even under the toughest operating conditions. - Numerous lashing points and a heavy-duty floor offer flexible lashing options and perfect grip. - Wheel stopper, fully adjustable with quick-adjustment system. Suitable for lowered vehicles - 2x central aluminum floor storage box, recessed into the loading area, offers the ideal storage option for heavy, bulky objects. Aluminum lids are included. - Front floor storage boxes with aluminum lids (gas spring supported) - Electric winch, 12V with cable remote control. 2,250 kg pulling force, with roller rope window, winch cable and carabiner hook - A sliding bar for the electric winch allows it to be adjusted to different positions in the car. - Winch cable remote control can be connected to the rear of the vehicle. - Electro-hydraulic tilting function of the loading area, tilt at the push of a button, for optimum drive-on angle - very stable welded steel frame - frame completely hot-dip galvanized - spare wheel with holder mounted - very stable V-drawbar REINFORCED - ALKO overrun device and parking brake - automatic reverse drive - cast steel coupling head with integrated ALKO high-security lock - plastic mudguards - 13-pin plug - LED light package LED light package: - 2 LED reversing lights mounted on the side of the box body - 2 LED loading lights at the rear above the loading ramp - 2 LED light bars mounted in the interior - reversing lights - full LED safety lighting - integrated rear fog light - various front, side and rear marker lights - heavy-duty support wheel - 5-year chassis warranty - 4 wheel lashing straps for lashing over the wheel New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyrig Cccqmsg

Condition: like new (used), Year of construction: 2018, Operating hours: 8,301 h, Functionality: fully functional, Machine/vehicle number: A1240A0650, Laser power: 4,000 W, Sheet thickness aluminum (max.): 10 mm, Sheet thickness steel (max.): 20 mm, Working range: 4,000 mm, Total length: 11,400 mm, Total height: 2,400 mm, Total width: 7,050 mm, Workpiece weight (max.): 1,280 kg, Overall weight: 13,000 kg, Type of input current: three-phase, Input current: 160 A, Input voltage: 400 V, Input frequency: 50 Hz, Sheet thickness (max.): 20 mm, Travel distance X-axis: 2,000 mm, Travel distance Y-axis: 4,000 mm, Travel distance Z-axis: 150 mm, Compressed air connection: 6 bar, Space requirement width: 7,500 mm, Space requirement length: 13,500 mm, Space requirement height: 3,500 mm, Table width: 3,350 mm, Worktable length: 4,400 mm, Worktable width: 2,000 mm, Equipment: Cooling Unit, Documentation/Manual, Safety Light Barrier, For sale in Hungary TruLaser TL3040 Co2 4kW lasercutting machine. Used only in one shift, every service made by Trumpf according to the service contract. The cahnge reason is a new machine. Installed in 16.08.2018. You can check every info about the machine directly at Trumpf. Cccpmbs

Condition: ready for operation (used), Year of construction: 2008, Control Unit Brand Trumpf Model TASC 3 Controller Brand Sinumerik Model 840 D Main Drive Laser power CO2 Laser TruFlow 3200 incl. LensLine E2Pny9A Movement X-Axis Movement 4000 mm Y-Axis Movement 2000 mm Additional Equipment NitroLine PlasmaLine FocusLine SprintLine Maintenance-free turboradial blower Mirror telescope Cooling unit Laser cutting heads with 5" and 7.5" lens Cutting head quick-change device ControlLine This TRUMPF TruLaser 3040 laser cutting machine was manufactured in 2008. It features a large working area of 4000 x 2000 mm, equipped with advanced technologies like NitroLine, PlasmaLine, FocusLine, and SprintLine. The CO2 Laser TruFlow 2000 ensures high-quality cuts, supported by a maintenance-free turboradial blower and a cooling unit. Ideal for diverse cutting tasks, the TRUMPF TruLaser 3040 machine we have for sale is a robust choice for any workshop. Contact us for more information. Application Types Cutting

Condition: excellent (used), Functionality: fully functional, TREIF PHOENIX-CE ID.NO. 2819 Cccmw9W Treif Phoenix-CE Type 3040 Dicing / Shredding machine with many associated tools as shown in pictures. Chamber dimensions 55 x 17 cm H 12 cm. Dimensions 230 x 110 cm Height 180 cm.

Year of construction: 2007, Condition: used, Working area X 4000 mm, Y 2000 mm, Z 115 mm Mmewmath Weight 16000 kg parameters L x W x H: approx: 9800 mm x 5300 mm x 2000 mm Siemens Sinumerik 840 D type of laser TruFlow 4000 W max thickness 20 mm 4000 mm x 1250 mm feed 3400 mm Dismantling, loading, crane is not in price of machine - plus price per all services Motohours: Machine is not used in production from April 2023 - NC: 88631 - Resonator/HD pump 1: 87603 - Beam on/pump 2: 53667

Condition: excellent (used), Year of construction: 2014, Operating hours: 30,000 h, Functionality: fully functional, Machine/vehicle number: A1240A0486, Laser power: 3,200 W, Sheet thickness aluminum (max.): 8 mm, Sheet thickness steel (max.): 15 mm, Type of input current: three-phase, Equipment: Cooling Unit, Documentation/Manual, Safety Light Barrier, Laser cutting machine sheet size:2000x4000 B9Duyxunf0

Condition: used, Year of construction: 2023, faceplate diameter 3.000 mm swing diameter 4.000 mm turning height 2.500 mm Control Fanuc 0i-T max. workpiece weight 30.000 kg table: table diameter 3.000 mm table speeds 1 - 100 1/min power capacity - table 60/75 kW C - Axis: Working speed 0 - 180 °/min max. table speed 0,5 1/min turret slide: Shank diameter 50 mm spindle cone ISO 7/24 No.50 Spindlespeed 15 - 1.500 min/-1 power capacity - Tool Spindle 22 / 26 kW ram cross section 300 mm axis stroke: x-axis 2.335 mm z-axis 1.600 mm cross rail adjustment 2.000 mm Tool-Presetter: tool taper MAS BT 50 number of toolpositions 24 (2x12) pos. max. tool weight 90 kg draw bolt DIN.69872 feeds: rapid feed (X / Z) 8 m/min rapid traverse of the crossrail 500 mm/min total power requirement - kW weight of the machine ca. 95 t dimensions of the machine ca. 14,0 x 7,4 x 9,0 m Vertical Turret Lathe - Double Column HANKOOK - VTC 3040 E - NEWMACHINE - price delivered, installed Germany / Europe - Delivery time approx. 14 months - Automatic Tool Changer - 12 turning / 12 milling E2Or8Um - Geared box X,Z-axis - Safety system for overload - Hydraulic unit & Coolant system - Auto. Lubrication system for slide way - Lubrication oil cooler - Through tool coolant - NC power off - Splash guard - X-axis slide way protect steel cover - Safety guard rail - Work light & Patrol lamp - Leveling blocks - Foundation bolts and nuts - Tool box with maintenance tools - C-axis scale

Condition: excellent (used), Year of construction: 2008, Operating hours: 43,500 h, Functionality: fully functional, Laser power: 4,000 W, Sheet thickness aluminum (max.): 10 mm, Sheet thickness steel (max.): 20 mm, Travel distance X-axis: 4,000 mm, Travel distance Y-axis: 2,000 mm, Worktable length: 4,000 mm, Worktable width: 2,000 mm, Equipment: Cooling Unit, Technical data: Make TRUMPF Type TruLaser 3040 - 4 kw Year of manufacture 2008 Working area 4,000 x 2,000 x 115 mm Control Siemens Sinumerik 840 D Laser power 4,000 watts Max. Sheet thickness mild steel 20 mm Max. Sheet thickness stainless steel 15 mm Max. Sheet thickness aluminum 10 mm Operating hours NC on: 43,500 h / beam on: 13,400 h STANDARD EQUIPMENT: Bewwjxc0 - Closed machine frame with integrated laser unit Laser unit: TruFlow 2000 high-frequency excited CO2 laser, maintenance-free turboradial blower, mirror telescope, cooling unit, logbook function - Automatic pallet changer and longitudinal conveyor belt - Drives: maintenance-free three-phase servomotors - Automatic focus position adjustment AutoLas Plus - HI-LAS high-pressure cutting - Plasma sensor system PMS - Fast processing with SprintLas - ContourLas for the production of small holes - Programmable cutting gas pressure setting - Laser cutting head with 5" lens with quick-change device - Laser cutting head with 7.5" lens with quick-change device - DIAS III - Laser logbook function - Automatic switch-off - Work area lighting - Control system: PC-based open control system, simple operation and networking, online help, - diagnostic functions, maintenance logbook, technology data, teleservice, 3.5" floppy disk drive, BNC/RJ45 network connection - Safety: Multi-beam light barriers, beam guidance fully encapsulated and ventilated, monitoring system, extraction system and compact dust extractor, protective cabin - Electrical equipment for three-phase current 400 V / 50 Hz - Paintwork: textured paint white RAL 9002 / gentian blue RAL 5010 EXTENDED EQUIPMENT: - More powerful TruFlow 4000 laser incl. magnetically levitated turbine (LSM) - PCS - Preparation for LoadMaster automation

Condition: used, Year of construction: 2007, Machine/vehicle number: A0240A0521, Working hours laser on: 50921 h Working hours beam on: 21717 h Laser power: 3200 Watt Working range laser: 4000 x 2000 x 115 mm Max. steel: 20 mm Max. stainless steel: 12 mm Max. aluminium: 8 mm Length: 11600 mm Width: 5300 mm Height: 2200 mm Machine weight: 16000 kg Electrical connected load: 73 kVA Standard configuration - Closed machine frame with integrated laser unit - Maintenance-free three-phase AC servo motors- Automatic pallet changer- Conveyor belt for small parts / slug- Work area lighting- Positioning laser diode- Oil spray device- AutoLas Plus- Hi-Las- PMS TRUMPF Laser- CO2 laser TLF 3200- Cooling unit- Radio-frequency - Radio-frequency excitation - Programmable cutting gas pressure - Laser power control - Logbook function Cutting head - Universal quickchange device for cutting head Control Unit - Siemens Sinumerik 840 D - 3,5" floppy drive - RJ45 network connection - Automatic shut down mechanism - Dignostic function - Maintenance logbook - Technology data Cath0Smuiw Safety - Light barriers - Compact dust extractor - Multi chamber exhaust system - Beam delivery system Programming - Workshop programming ToPs 100 lite Extended machine accessories none Automation none

Condition: excellent (used), Year of construction: 2009, Operating hours: 21,603 h, Functionality: fully functional, TruLaser with TruFlow 4000 TECHNICAL DETAILS Travel X / Y / Z: 4000 / 2000 / 115 mm Workpiece weight: max. 900 kg Control: Sinumerik 840 D SL Sheet thickness Al / stainless steel / mild steel: 20 / 15 / 10 mm Laser source: TruFlow 4000 Power range: max. 4000 W Wavelength: 10.6 µm Simultaneous speeds: 140 m/min Position deviation Pa: ±0.05 mm Position spread Ps: ±0.03 mm MACHINE DETAILS Dimensions: 12 x 5.3 x 2.2 m Weight: 14.0 t Average power consumption: 11 - 65 kW Wialpda7 Switch-on time: 48,565 h Cutting time: 21,603 h EQUIPMENT - Nozzle changer - RotoLas tube cutting device - Laser cutting head with 130 mm lens for high-speed processing STANDARD EQUIPMENT - Closed machine frame with integrated laser unit - Motion unit for high-precision processing - Torque drive in combination with linear direct drives - Closed beam guidance - Single-head strategy - Cooling unit - Automatic pallet changer Longitudinal direction - Wide longitudinal conveyor belt - Ergonomic control panel with touch color screen - Work area lighting - Position laser diode - Spraying device - Pierce Line - FocusLine - NitroLine - PlasmaLine Trumpf Laser: - TruFlow 4000 CO2 laser with optimized standby mode - Maintenance-free turboradial blower - High-frequency excitation - TASC laser control - Laser power control - Laser logbook function Cutting head: - Laser cutting head with 250 mm lens - Universal cutting head quick-change device (UTI) - ControlLine: Height control and sheet outer edge detection Control system: - Sinumerik 840D SL control system - 17" touch color screen - Simple operation - Simple workshop programming - Advanced workshop programming - Fast post-production - Integrated technology data - Automatic switch-off - ContourLine - FastLine - FlyLine - Microweld - Production plan - AdjustLine - Teleservice via Internet Data transmission: - USB interface - RJ45 network connection Safety: - CE mark - Light barriers - Multi-chamber extraction system - Compact dust extraction system - Machine cladding with Makrolon panes

Condition: used, Year of construction: 2018, Operating hours: 2,883 h, Manufacturer + model:CROWN DT 3040 Mast:2F2600 + initiaal lift ID:24031.2904 Cat.:Used Mast:2F2600 Lowered height:1730 mm Lifting height:2600 mm Capacity:2000 kg Year:2018 Hours:2882 hours Capacity:24 v / 375 ah Options:- DUBBEL stock stapelaar - PROPORTIONELE hef &amp daal ventielen - opklapbaar PLATEAU en BEUGEL Dntdgl - POWER steering

Condition: new, Year of construction: 2024, 2 in 1 = shear + press brake in one machine with control CYBELEC CybTouch 15'' shear capacity 3200 mm x 6 mm, throat 200 mm; press brake capacity 3040 mm, capacity 100 to; working hight 640 / 1240 mm, control CYBELEC CybTouch 15'', mot. back gauge 700 mm, shadow line, motor 7,5 KW Ju9Eqi dimensions 3700x1900x2400 mm, ca. 9000 kgs same machine with capacity L = 2200 mm or L = 1400 mm

Condition: used, Bending tool, die, lower knife, lower tool, lower beam, -Tool: for folding machine Enr7Mdft3 -Widening: for lower cheek -Dimensions: 33/76/3040 mm -Bore distance: 280 mm -Hole diameter: 18 mm -Length: 3040 mm -Weight: 33 kg

Year of construction: 2011, Operating hours: 44,856 h, Condition: excellent (used), Functionality: fully functional, TruLaser cutting system with additional Trumpf functions (Line) TECHNICAL DETAILS Working range X / Y / Z: 4,000 / 2,000 / 115 mm Max. speeds: 100 m/min (140 m/min simultaneous) Accuracy: +/-0,1 mm Laser power: 3200 Watt Control: Siemens Sinumerik 840 D Operating hours: 44,856 h CO2 laser: TruFlow 3200 including NitroLine Laser switch-on time: 27,887 h Max. Sheet thickness (St): 20 mm Max. Sheet thickness (VA): 15 mm Max. Sheet thickness (Al): 10 mm MACHINE DETAILS length: 12.000 mm width: 5.300 mm height: 2.200 mm weight: 14.500 kg CONSTRUCTION - closed machine frame with integrated laser unit - motion unit for high-precision machining - torque drive in combination with linear direct drives - closed beam guidance N09W2Ucn EQUIPMENT - cooling unit - automatic pallet changer in longitudinal direction - longitudinal conveyor belt - 17" touch color screen - work area lighting - position laser diode - spraying device - PierceLine - FocusLine - PlasmaLine TRUMPF LASER - CO2 laser TruFlow 3200 including NitroLine, with optimized standby mode, beam tube ventilation with N2 - maintenance-free turbo radial blower - high frequency excitation - Laser control TASC 3 - logbook function laser - laser power control - cutting head - Single cutting head strategy - LensLine with condition check - Laser cutting head with 250 mm lens - Universal cutting head quick-change system (UTI) - ControlLine: height control and sheet outer edge detection CONTROL Sinumerik 840D SL - integrated technology data - automatic switch-off - production plan - programmable cutting gas / pressure selection - ContourLine - Microweld - AdjustLine - Teleservice via Internet - FastLine - FlyLine - Simple workshop programming - Advanced shop floor programming - Fast post-production FURTHER - USB interface - RJ45 network connector - CE marking - Light barriers - Laser monitoring system - Multi-chamber suction system and compact dust removal system - Machine cladding with Makrolon panes

Year of construction: 2024, Condition: new, 2 in 1 = Press Brake + Shear bending length 3040 mm, Press power 75 to, Shear capacity L = 3200 mm x 6 mm, throat 200 mm, working high 640 / 1240 mm, Control CYBELE CybTouch 15, mot. gauge 700 mm, shadow cutting line, motor 10 KW dimensions 3700x1900x2400 mm, ca. 9000 kgs same machine available L = 2000 mm und L = 1400 mm Ptwqoa

Axe configuration: 3 axles, Wheelbase: 7,930 mm, First registration: 01/2002, Suspension: air, Color: red, Tire size: 385/65R22.5, Year of construction: 2002, Condition: used, Equipment: Abs, = Further options and accessories = - Disc brakes = Further information = Axle configuration tire size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Tire tread left: 40%; Tire tread right: 40% Rear axle 2: Tire tread pattern left: 50%; Tire tread pattern right: 50% Rear axle 3: Tire tread left: 50%; Tire tread right: 50% Dimensions Dimensions (L x W): 11520 x 255 cm Weights Unladen weight: 5,540 kg Payload: 33,460 kg GVW: 39,000 kg Functional Extendable body: Yes Condition General condition: very good Technical condition: very good Visual condition: very good Damage: none Uzqfkxugf2 Further information Please contact Office for further information.

Axe configuration: 3 axles, First registration: 02/1999, Suspension: air, Color: other, Tire size: 385/65, Year of construction: 1999, Condition: used, Equipment: Abs, = Additional options and accessories = - Air Suspension - Disc brakes - Lift Axle = More information = Tyre size: 385/65 Make axles: Mercedes Tyre profile: 30% Brakes: disc brakes Suspension: air suspension Rear axle 1: Lift axle Ux3T80Mzmn Serial number: YA5B303A939M53283

Axe configuration: 3 axles, Wheelbase: 9,260 mm, First registration: 03/2007, Year of construction: 2007, Condition: used, WSK000001224380 = Further information = E2Pszwy Axle configuration Rear axle 1: Lift axle; Max. Axle load: 9000 kg Rear axle 2: Max. Axle load: 9000 kg Rear axle 3: Lift axle; Max. Axle load: 9000 kg Dimensions Width: 253 cm Weights Unladen weight: 5,470 kg Payload: 33,530 kg GVW: 39,000 kg Condition General condition: very good Technical condition: very good Visual condition: very good Identification License plate: OJ-19-SV Further information Please contact Sales for further information. = Company information = If you have any questions or suggestions, Don't hesitate to contact us. We guarantee an answer within 8 hours. Prices are without VAT. No rights could be derived from given information. Office Phone: 0031165398949 MOB: 0031657945247 (Nederlands - English - Deutsch - Francais - Español - Italiano)Available on What's App and Viber. MOB: 0031653301652 (Nederlands) Available on What's App and Viber. When you pay by bank transfer, the money needs to be tranfered to our Bank Account underneath. Always check the payment details that are stated on our website. In case you have received other information please contact us. In case you have doubts please call us so we can verify the invoice and/or payment. Bank details: Rabobank Laan van Limburg 2 4701BP Roosendaal IBAN: NL 89 RABO 0174 3347 10 EORI/BTW/TAX: NL81057401B(01) BIC/SWIFT: RABONL2U

Mileage: 75,244 km, Power: 294 kW (399.73 HP), First registration: 07/1985, Overall weight: 26,000 kg, Fuel type: diesel, Color: red, Axe configuration: 4x4, Maximum load weight: 6,650 kg, Empty load weight: 19,350 kg, Next inspection (TÜV): 03/2025, Suspension: steel, Condition: used, Color red-white-red, unladen weight: 19350kg, permissible total weight: 26000kg, fabric seats, leaf suspension, IVECO Hauber towing and recovery vehicle, all-wheel drive, 2-way extension, goggles, 2x winches, torque converter transmission. 2.80 m wide. Sold without load, vehicle is registered and still 'in use'. Subject to errors, modifications and prior sale. Sale only to commercial customers; AWD Dph3T7