Brantner TA 23065/2 POWER-TUBE

Brantner TA 23065/2 POWER-TUBE

TA 23065/2 POWER-TUBE plus+ 40 km/h COC EU
with 2 lifting cylinders, 2-line DL brake with ALB
Standard equipment:
Chassis: Rectangular frame / Closed double-press profile frame, very torsion-resistant, highest load capacity with low tare weight
Drawbar: Drawbar made of double-C press profile, adjustable with bolts, flange drawbar eye for ball coupling K 80 for 3 t support load
Suspension: Parabolic suspension mounted under the axles, low platform height, optimal stability
Body: Conical body, no weld seam in the body floor (film seam fusion), solid box profile as body end edge, wide side rails for high lateral stability at the rear body end, side walls flared for optimal stability, absolutely smooth inner walls, mesh grille in body front wall with plexiglass cover
Body rear wall: Hydraulic opening with double-acting cylinders, linkage adjustable, mechanically locked, guarantees grain tightness, potato slide with lever
Tipping mechanism: Extra strong, widely spaced ball tipping mechanism with conical pan for stability when tipping
Slide: Potato slide with easily accessible adjustment lever
Support: Hydraulic support leg, double-acting with locking block
Electrical system: LED lighting with resistor for turn signals, outline and side marker lights, 12-volt lighting and turn signal system, 7-pole plug and cable, socket at the rear
Paint: Coating for high-quality corrosion protection (truck quality), 2-component acrylic spray paint for UV protection and optimal appearance, chassis frame granulate blasted in automatic continuous system, cavities coated or sealed with high-quality cavity protection, body HB-Green, substructure Black

Optional equipment:
+ Steerable axle, hydraulically lockable, with BPW axles, square tube 150 mm, brake 410x180 mm, track 2225 mm
+ Spring stabilizer for rear axle (recommended for steerable axle)
+ 32 t spring assembly, reinforced equalizer lever, reinforced parabolic springs (permissible total weight of the vehicle remains at the standard total weight of 20,000 to 24,000 kg)
+ 24 t maximum permissible total weight, with flange drawbar eye for ball coupling K 80, permissible support load 4 t (hole pattern 145/145),
axle distance over 1800 mm (steerable axle is highly recommended)
+ sprung drawbar with drawbar and parabolic spring
+ Steel side walls 800 mm, can be folded down sideways
+ Mesh grille across the entire width in the uppermost front end wall
+ Tires 710/50 R 26.5 FL 630 BKT 170 D, axle distance 1600/1800 mm, overall width over 2750 mm, with parking warning signs, with fender extensions, track 2225/2250 mm
Approximate technical data:
Total weight (kg) 21000 - 24000
Tare weight (kg) 6100
Support load (kg) 3000
Body size inside (mm) 6500 x 2180/2280
Body height (mm) 1500
Sheet thickness body (mm) 4
Load volume // incl. loading cone (m³) 22.0
Load volume with AW 600 (m³) 30.7
Load volume with AW 800 (m³) 33.6
Overall length (mm) 8140
Overall width (mm) 2550/3000
Platform height (mm) 1420
Coupling height (mm) 400 - 1000
Nwjds Agaxaepfx Ai Tsn
Axle square (mm) 150
Track (mm) 2225
removable lamp protection YES
Number of hard-chrome plated lifting cylinders 2
Step diameter 1 (mm) 120
Step diameter 2 (mm) 105
Step diameter 3 (mm) 90
Step diameter 4 (mm) 75
Cylinder stroke (mm) 2255
Tipping angle backwards (°) >50
Required oil quantity (l) 37

The listing was translated automatically. Translation errors are possible.