Road sweeper

Bucher - GMeiner - Giletta TGM 18250 Bucher

Operating hours: 3597, First registration: 23.06.2016, self-propelled _____ Standard basic equipment: Fan unit - fan drive hydraulically operated via a gearbox-independent PTO located on the chassis (semi-hydrostatic drive) – Hydraulic fan drive – Hydraulic oil tank 50 l – Engine compartment finished with sound-absorbing material – Fan exhaust guided upward through the front superstructure of the hopper – Hydraulic pump, single for sweepings hopper – Sweepings hopper (with tailgate and sieve) and water tank made of 1.4003 stainless steel – Engine compartment paneling, standard steel – Gross hopper volume 6.5 m³ – Hopper floor made of alloyed stainless steel, 1.4301 – Hopper tipping angle approx. 55 degrees – Dirt chute made of stainless steel, 1.4003 – Inspection hatches right and left – Dirty water drain 4", A-coupling – Air guide sieve, manually foldable – 2 amber rotating beacons at rear of hopper – Pneumatically actuated air shut-off valve on suction hose – Multi-stage safety support, pneumatically operated – Marker lights at rear of hopper, side marker lights – Integrated water tank – Provision for rear suction hose boom or roof-mounted – Side marker lights.

Sweeping intake – Intake, wear-resistant coated – Coarse pickup by tilting the suction nozzle – Suction hose diameter 250 mm – Disc brush, pushed – Disc brushes, hydraulically driven, steel – Disc brushes, steel, diameter 500 mm, pulled – Infinitely variable speed regulation for disc brushes – Two robust swiveling trailing wheels – Automatic raising of sweeping units when reversing – Working lights for sweeping assembly.

Rjdpfx Afefy Am Ujcop
Roller brush – Roller brush mounting, pulled – Brush length 1,300 mm, brush diameter 406 mm with synthetic bristles (chassis-dependent) – Hydraulically driven roller brush – Throw limit skirt for roller brush assembly.

Water system – Water tank capacity approx. 1,554 l – Water tank made of 1.4003 stainless steel, coated – Water level indicator in cab – Water filling device, Storz C (2"), right – Manual water filling device, right and left – Water pump, hydraulically driven – Automatic water stop when lifting the sweeping units – Spray water connection, 3/4", rear right – Water blow-out system – Electric water valves in the cab – Dual nozzle bar, low pressure front.

Instrument cluster and control panel – Bucher instrument cluster, incl. 7" color display – Ergonomic control unit mounted on driver’s door, equipped with main functions – Display includes the following features: water level indicator, operating hours, and rear axle load – Warning and indicator lights for rear axle load – Control and regulation unit for adjusting brush pressure (brush relief), stepless speed regulation of disc brushes – Electric valves for water system, operated from the cab – Operation of debris hopper functions via cable remote control from cab, also operable from outside – Operation of air guide sieve, controlled at rear right of vehicle – Overload indicator for rear axle load, warning light in display (option).

The listing was translated automatically. Translation errors are possible.