Other

Caterpillar M318D Mobilbagger

Year of construction: 2018, condition: like new (used), functionality: fully functional, MACCHI COEXTRUSION LINE FOR 7-LAYER EVOH BLOWN FILM Complete line for the production of 7-layer EVOH blown film 4 Macchi extruders with 65 mm screw diameter 3 Macchi extruders with 55 mm screw diameter Innoplast gravimetric dosing units 7-layer die head, 450 mm diameter with IBC, 2.4 mm GAP K-Design cooling ring Double thickness control IR+XRay Maximum width 2400 mm Calibration basket Rotating haul-off Cason corona treater Macchi BO-Plus double back-to-back automatic winder Web guide Year 2018 Laedpey Nk Hajfx Abzsg

Condition: excellent (used), Year of construction: 2004, operating hours: 114,000 h, overall weight: 4,400 kg, power: 250 kW (339.91 HP), volume flow: 2.802 m³/h, operating pressure: 10 bar, Regularly serviced, in excellent condition. Atlas Copco ZR250 Screw compressor, 10bar 46m3/min Oil-free, water-cooled. MD600 with adsorption dryer Compressor: Manufacturer: Atlas Copco Type: ZR 250 year of manufacture. 2004 loaded operating hours 114,000 Max. operating pressure: 10bar single-stage drive Cooling water consumption 3.7 liters/s Air delivery: 43.6m3/min Water cooled Oil free Power: 250 kW Mains voltage: 400v 50Hz 445A Last service: September 2023 Adsorption dryer, water-cooled Manufacturer: Atlas Copco Type: MD 600 W Year of construction: 2004 Max. operating pressure: 10.5 bar Empty volume: 350 liters machine dimensions: Laedsrp D Uxepfx Abzeg length: 3000mm width: 1600mm height: 2000mm weight: 4400 kg

Condition: excellent (used), Year of construction: 2018, operating hours: 34,656 h, functionality: fully functional, power: 250 kW (339.91 HP), volume flow: 2,694 m³/h, pressure (max.): 10 bar, type of cooling: air, Equipment: refrigerant dryer, type plate available, Second hand Atlas Copco GA250VSD, year of manufacture 2018, approximately 34,656 operating hours. 10 bar with 44.90 m3/min. 250 kW. Ljdsw Ewd Rspfx Abzoag

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, cooling capacity: 553 kW (751.87 HP), type of cooling: air, aircooled Chiller Carrier 30RBP 550R Lodoznb Rkjpfx Abzeag Cooling cap.553 KW (162 refr.tons) 2 circuits with each 4 scroll compressors Plate evaporator, with integrated pump R 32 tested,ready for operation

Condition: excellent (used), Year of construction: 2017, operating hours: 28,625 h, functionality: fully functional, power: 90 kW (122.37 HP), volume flow: 990 m³/h, pressure (max.): 8.5 bar, type of cooling: air, Equipment: type plate available, Premium screw compressor Atlas Copco GA90+. 90 kW, 8.5 bar with 16.50 m3/min. Only 28,625 operating hours. With heat recovery, new compressor oil and new oil filters. Ljdpfx Ajuqanaobzsag

Year of construction: 2012, condition: used, This Macchi 3-layer blown film co-extrusion line is designed for the production of high-quality polyethylene films with outputs of up to 800 kg/h. The line processes LDPE, LLDPE, MLDPE, and HDPE and is suitable for manufacturing collation shrink film, gusseted shrouds, stretch hood film, tubing, and sheeting. Materials to be processed: LLDPE/LDPE/LLD/HDPE Extruders: 65 mm + 80 mm + 65 mm Infrared heaters 3 pcs plate filters Head: 3-layer blown film die head TE5303-IBC-350/500 Die diameter: 350 and 400 mm IBC Die gap: 1.8 mm Output: Up to 800 kg/hour, depending on the material formulation Air ring: Dual-flow air ring, carbon fiber Take-off: Take-off unit, 2400 mm wide Oscillating nip rollers Lodpfxezkru Es Abzeag Motorized side gusseting Rewinder: Double winder, fully automatic back-to-back rewinder Winder, fully automatic roll change Reel diameter up to 800 mm Winding width 2350 mm Accessories: Tower Web guide, E&L Gravimetric weight control system, Piovan/Doteco Component blender, Shini Dosing units, Doteco Automatic thickness control, Kundig K-Design profile gauge control system Calibrating basket Corona treater, Martignoni Air shafts, 8 pcs

Condition: like new (used), Year of construction: 2021, operating hours: 25,495 h, functionality: fully functional, power: 160 kW (217.54 HP), volume flow: 1,986 m³/h, pressure (max.): 8.3 bar, type of cooling: air, Equipment: refrigerant dryer, type plate available, Screw compressor Atlas Copco GA160VSD+FF. Integrated dryer and frequency converter. 160 kW, 8.3 bar, 33.10 m³/min. Year of manufacture: 2021. Operating hours: 25,495. Ljdpfx Aeyzg Eijbzoag

Condition: used, mileage: 186,279 km, power: 368 kW (500.34 HP), first registration: 01/2022, fuel type: diesel, overall weight: 19,000 kg, axle configuration: 2 axles, brakes: retarder, color: black, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, If interested, please call or message via WhatsApp, Telegram, or Viber. YS2S4X20005632640 Ledpfx Aoyz H Auobzeag GERMAN TRUCK Comprehensive maintenance contract with Scania

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: API607459, overall weight: 1,580 kg, power: 55 kW (74.78 HP), volume flow: 637.2 m³/h, operating pressure: 7 bar, pressure (max.): 7.3 bar, type of cooling: air, Equipment: refrigerant dryer, Atlas Copco GA55+ FF screw compressor – 55 kW – manufactured in 2009 For sale: a well-maintained Atlas Copco GA55+ FF screw compressor with an integrated air dryer. The compressor has already been serviced and is ready for immediate use. Specifications: Type: Atlas Copco GA55+ FF Year of manufacture: 2009 Laodpezku Ubofx Abzsg Motor power: 55 kW / 75 hp Capacity: 10.62 m³/min Working pressure: 7.3 bar Motor speed: 2,978 rpm Weight: approx. 1,580 kg Operating hours: 17473/4022 Equipped with an integrated air dryer Serviced and ready for use This compressor is suitable for industrial applications that require a reliable compressed air supply. Optionally available with a new or used compressed air tank.

Condition: excellent (used), Year of construction: 2014, PROD. ATLASCOPCO TYPE GA160VSDFF S/N APF195117 Lasdpszl S Smofx Abzeg YEAR 2014 POWER (kW) 186 CAPACITY (m3/min) 4.82-26.70 DISCHARGE PRESSURE (bar) 8.3 HOURS (RUNNING/TOTAL) 67773 FREQUENCY CONVERTER yes BUILT-IN DRYER yes AFTERCOOLER no COOLED BY (AIR/WATER) air WITH TANK no DOCUMENTS no CONNECTION 3 NEW/USED USED