Wire eroding machine

CHARMILLES Robofil 690

Year of construction: 2004, condition: repair required (used), X-axis: 800 mm // 900 mm/min Y-axis: 600 mm // 900 mm/min Z-axis: 400 mm // 900 mm/min U/V: 60 mm Workpiece: X: 1300 mm Workpiece: Y: 910 mm Workpiece: Z: 400 mm Max. table load: 2,300 kg Main electronic connection: 400 V / 50 Hz / 3P Total power requirement: 10 KVA Air pressure: 6 bar Dielectric tank: 250 liters Technical attributes Z-motion: 400 mm X-motion: 800 mm Y-motion: 600 mm Weight approx.: 4,700 kg Approx. onsite dimensions (L x W x H): 1,950 x 2,550 x 2,000 mm. Manuals and documentation included. Not working; we suspect the power supply. Mechanical condition is very good. Bcodpfxox Hxikj Afcjw

Condition: excellent (used), Year of construction: 2003, PET bottle blowing machine Manufacturer: KRONES Bsdpfxovddkvo Afcscw Model: CONTIFORM K781 Efficiency: 12,000 bph Includes 1.5 L and 0.5 L bottle molds Power: 150 kW Air requirement: 10 bar - 1500 m3/h, 30 bar - 1000 m3/h Set dimensions (blow mold + preform feeder): 1100 x 340 cm, h: 450 cm Blow mold dimensions: 500 x 340 cm, h: 250 cm Feeder dimensions: 600 x 250 cm, h: 450 cm Air requirement: 10 bar - 1500 m3/h, 30 bar - 1000 m3/h Year of production: 2003 Technical documentation of machine operation Very good condition

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, The machine is in good technical condition. X-axis travel: 900 mm Y-axis travel: 500 mm Z-axis travel: 450 mm 4 axes Control: Fanuc FS31i Spindle speed: 20-20,000 rpm Table: - External length: 1,000 mm - External width: 500 mm Bjdpfx Aox Dazysfcecw - Maximum table load: 1,000 kg New electric spindle installed 4 years ago. Tool magazine for 30 tools, incl. tool holders. The machine operated in single-shift operation. Inspection under power possible by prior arrangement.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 310 mm, workpiece width (max.): 820 mm, workpiece length (max.): 1,050 mm, feed rate X-axis: 600 m/min, feed rate Y-axis: 1,000 m/min, table load: 1,000 kg, Equipment: compressor, fridge, FANUC Robocut α-C600iA Bcjdpfxoyhb D Es Afcow

Condition: used, Year of construction: 2015, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, Travel: X 600 / Y 400 / Z 310; Water bath machine; Automatic wire threading; Chiller. Bcsdpfjx Hgg Dsx Afcsw

Year of construction: 2019, operating hours: 18,138 h, condition: ready for operation (used), overall weight: 25,340 kg, This SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 50 mm, clamping force of 3,500 kN, and tiebar spacing of 820 mm. It has operated for 18,138 hours with 12,875,090 cycles. If you are looking to get high quality moulding capabilities consider the SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 machine we have for tact us for more information. Additional information • Screw Diameter: 50 mm • Maximum Dosing Volume: 530 cc • Cycles: 12875090 • Tiebar Spacing: 820 mm Bjdpfx Afex D Nxzjcocw • Clamping Force: 3500 kN

Condition: good (used), Year of construction: 2016, In good technical condition and fully functional. Built in 2016. Machine includes 4-axis TSUDAKOMA, workpiece probe, and tool probe. Drives Axis drives (X/Y/Z) 1,000 / 550 / 500 mm Distance table surface - spindle surface 130 - 630 mm Axis guide - linear rolling LM Table work surface 1,100 x 502 mm Load capacity 700 kg Table surface configuration mm 5x T-slot (width 18, pitch 80) Maximum spindle speed 12,000 rpm Spindle power (10 min./continuous) kW 18.5 / 11 Rapid feeds (X/Y/Z) m/min 36 / 36 / 30 Working feed (X/Y/Z) mm/min 1 - 24,000 Sliding motor (X/Z) kW 1.8 / 1.8 / 3.0 Automatic tool change Tool taper - BT40 Clamping bolt - MAS P40T-1 (45°) Number of tool positions: 24 Max. tool diameter mm Ø 80 / Ø 150 (without secondary tool) Max. tool length / weight mm / kg 300 / 8 Tool-to-tool change time: Section 2.5 Chip-to-chip change time: Section 4.3 Magazine and change disk design with rotating arm Power consumption: 30 kVA Tank capacity for spindle lubrication/cooling: l 6 / 20 For cooling emulsions: l 380 Bcodpfxex Tti Sj Afcew Machine dimensions: Height mm 2,670 Floor area (length x width) mm 3,335 x 2,200 Weight: 6,500 kg Control system: Fanuc 0i-MD Air blowing of the spindle Machine adjustment elements Machine protective cover Screw conveyor in the work area Cooling system Safety door Ethernet interface

Condition: used, Year of construction: 2011, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, Mitsubishi wire-cut EDM machine FA20-S advance, year 2011, fully functional. Can be inspected under power. Bodpjylyhksfx Afcecw